Joinery

Weinmann Weinmann WBZ 160/13 Powersix

Condition: used, fuel type: diesel, color: green, Year of construction: 2015, operating hours: 11,445 h, Year of manufacture: 2015 Model year: 2015 Field of application: Construction Empty weight: 32.000 kg General condition: average Technical condition: good Visual appearance: average Price: On request Please contact Ferdinand Pater for more information Stock no. D15 Machine Brand Sennebogen Type: 830M D-series Weight: 34 Ton Serial number: 830.0.2170 Building year: 2015 Worked hours: 11.445 Engine: Cummins QSB 6.7 Boom: K15 configuration, Safety check valves on boom and stick cylinders Cabin: "Maxcab, Hydraulic Cab Riser, 2,7 m. in height Gantry catwalk on cabin " Upper carriage: Standard Sennebogen color, Central greasing system Lights: Several (LED) lights on boom, stick and cabin Gedpfx Aet Dlwysfnotu Extra: Machine is serviced and clean, ready for work

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Gtodow Sy T Hepfx Afneu

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Gtodpfxstrd Hfj Afneu Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Condition: excellent (used), VK450 2RE log peeler.Equipped with two rotors. One is a stump rotor. The other is the peeling rotor. Min-max tree diameter 8-45 cm. Min tree length 3 m. Gtedpfjulv Hzox Afneu Complete with original VK centring conveyor. To be sold after overhaul.

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Godpfx Aowuppwjfnotu Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw Gtodpfx Afjwz H Aneneu 1 outfeed table

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Gjdpfovryhgox Afnstu

Condition: excellent (used), Year of construction: 2013, feed length X-axis: 13,000 mm, saw blade diameter: 800 mm, working length: 13,000 mm, Equipment: safety light barrier, We are offering this very well-maintained Hundegger K2i-625 (UF5) joinery machine, year of manufacture 2013. Fully automatic wood infeed with feed roller conveyor and loading & infeed transporters Under-table swiveling crosscut saw 11 kW Universal 4-axis milling unit (UF4) Combined support for vertically operating tools Drilling unit 2.2 kW – drilling direction vertical Combined support for horizontally operating tools Drilling unit 2.2 kW – drilling direction horizontal Fully automatic hydraulic beam turning station Transport and positioning system "two-hand operation" incl. machine frame Electronic control with EKP software Refined machine surface Extension of the cross conveyor and feed roller conveyor for timber lengths up to 13 m 5-axis universal milling unit – UF5 (surcharge for 4-axis) Drilling unit 2.2 kW – drilling direction horizontal Front marking unit (operator side) InkJet 4 HP system on the stop side Remote maintenance (incl. portable video camera) Control unit for waste removal with operating buttons Extension of roller conveyor on the output side Spare saw blade 800 mm Dovetail cutter 60x3 Bx16, 5 mm (with reversible blades) Gtedsx Trllepfx Afneu If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 11470, functionality: fully functional, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Gtsdowhpavspfx Afnju

Condition: excellent (used), Buhler Batch mixer Speedmix model AHLM 4000 Gsdewf Am Djpfx Afnotu In very good condition