Four-side moulder

WEINIG Unimat 22 E

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Planing size 220 x 150 mm, grooved bed, electric height and width adjustment Machine in operation, works. CHF 14500.— excl. VAT Ffodpfxeu Sntzs Afnou From site 4102 Frenkendorf Switzerland

Condition: used, Year of construction: 2006, Dimensions (LxBxH): 217 x 460 x 183 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 Ffedpfxewnig Ns Afneu - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus Fedpfx Afewgwmhonofu approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Year of manufacture: 2018 Planing width: 230 mm Planing height: 160 mm Infeed table: 2,500 mm Feed speed: 40 m/min Feed motor: 7 kW Table treatment: Marathon coating (hardened, excluding infeed table and special plates) Ffjdpfxsyg Hflo Afnou Driven roller in table with width 200 mm Memory Plus system for 500 profiles Spindle arrangement Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 11 kW Top: 11 kW Bottom: 11 kW Machine is in very good condition

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 6, power: 65 kW (88.38 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 6 spindles, with hard coating. Working width: 260 mm, working height: 160 mm, spindle diameter: 40 mm, Feed rate: 5.5 kW / 6 - 36 m/min, Ffedpfevbi Rvox Afnou Spindle arrangement: 1-bottom (11 kW ) 2-right + 3-left (15 kW) 4-Top (11 kW) 5-top ( 11 kW ) 6-bottom ( 11 kW ) Air cushion in the table. Short parts package Four powered rollers in the table.

Condition: excellent (used), CATALOG NUMBER: 6575 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 170 mm - 7 spindles: 1) Lower horizontal 230 mm, 11 kW 2) Right vertical 170 mm 3) Left vertical 170 mm (2nd and 3rd spindle), 11 kW 4) Right horizontal 170 mm, 5.5 kW 5) Upper horizontal 230 mm, 11 kW 6) Lower horizontal 230 mm, 7.5 kW 7) Universal 230 mm, adjustable in 360°, 7.5 kW - All spindles adjustable up/down, right/left - Spindles 3 and 5 are electrically adjustable - ATS system - Spindle diameter: 40 mm - Electric brakes - Top: 4 infeed driven rollers, serrated, including 1 double roller - Top: 1 double rubber infeed roller - Top: double rubber outfeed roller - Bottom: 2 smooth steel driven rollers - Bottom: double rubber driven roller - Power feed via Cardan shafts Ffjdex Rc S Dopfx Afnou - Pneumatically pressed rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 5.5 kW - Electric thickness adjustment - Motorized elevation of machine body: 0.55 kW - Centralized table lubrication - Extraction outlet diameter: 7 x 140 mm - Dimensions (LxWxH): 5800 x 2050 x 1850 mm - Weight approx.: 4500 kg ADVANTAGES – Made in Germany, WEINIG brand – With 7 heads – Universal spindle – With ATS system – For processing wet and dry timber – Used moulder, condition: very good Net price: 169,900 PLN Net price: 40,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price subject to change in case of significant currency fluctuations)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, WEINIG Powermat 700 Planing and Moulding Machine Year of manufacture: 2020 Tool configuration: 018 (b-r-l-t-t-b) 1st bottom spindle: 7.5 kW, 6,000 rpm 2nd right spindle: 15 kW, 8,000 rpm 3rd left spindle: driven together with right spindle, 8,000 rpm 4th top spindle: 11 kW, 8,000 rpm 5th top spindle: 7.5 kW, 8,000 rpm 6th bottom spindle: 7.5 kW, 8,000 rpm Feed motor: 5 kW Infinitely variable feed speed: 5 - 40 m/min Total connected load: 56.5 kW Equipment: - Comfort Set - Electronic digital readouts - Rebating unit - MarathonCoating table insert in front of first spindle Fsdpfx Afeyh Rhwensfu - Quick-adjustable fence lip after right spindle - Pressure roller above, opposite right spindle, swing-away and spring-loaded - Reduced roller spacing opposite right spindle - Extension of pendulum axis opposite left spindle up to 150 mm - CNC control for dimension adjustment (thickness and width) - Split pressure shoes before 1st and 2nd top spindles - Frequency inverter for smoother motor start-up and stop - Pneumatically controlled feed roller before 1st bottom tool (raise/lower) - Climate control unit for control cabinet - Short infeed table, 1.20 m long, with 2 driven rollers above table and 1 driven roller in the table - MemoryPlus with 10.1-inch display