Tool measuring stand

Weinig OPTICONTROL

Condition: excellent (used), WEINIG OptiControl 970 PowerLock Minimum tool diameter: 90 mm Dedpfx Agjyibf Nj Djkk Maximum tool diameter: 300 mm Tool length: 0 – 240 mm Measuring range for radius: 150 mm Contactless measurement of tool dimensions: radius (R) and height (H), displayed on electronic digital displays

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Dksdpfswmw Nvjx Ag Dek Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. OptiControl PowerCom offers you: measuring instruments Dodpfjyl Rm Rsx Ag Djkk recording data from measured instruments creating new profiles Online data transmission optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: used, Year of construction: 1999, functionality: fully functional, mount diameter: 50 mm, type of input current: three-phase, tool diameter: 50 mm, tool length: 330 mm, input frequency: 50 Hz, Tool presetting device WEINIG Opticontrol Swing diameter: 0 - 300 mm Tool length: 0 - 330 mm Shank diameter: 50 mm Dodpfexwnvrjx Ag Dekk

Condition: refurbished (used), Dry board sorting line - dry board sorting line - 20 pockets - belt - automatic spacer collection - Trimmer Almab with 16 saw blades - automation- TG automation, Sweden Sorting - Dynalyse MC Pro 2400 System - marking/printer - Alpha Dot Merlyn 350 - Drum chipper Erjo 204 MA Dsdpfovzqcyox Ag Dokk - stacker Almab with 9 cassettes - Pack press

Condition: ready for operation (used), Technical characteristics Affûteuse WEINIG RONDOMAT 950 Sharpening and manufacturing of profiled irons from raw irons Max. grinding wheel diameter : 225 mm Quick clamping Widths : 2 ; 3 ; 4 ; 10 mm Bore 60 mm 4 rotation speeds : 1500, 1700, 2400 and 3000 RPM Clearance angle : 15° to 35 Cross-bearing table Dodpfet D Su Sex Ag Djkk Tool holder Cutting diameter : 100 to 230 mm Tool width : 240 mm Copying device with constant axial system Système de mesure OPTICONTROL Flying circle diameter : 0 to 300 mm Tool length : 0 to 330 mm Shaft diameter 40 mm Electronic digital display of tool radius and height Projector for optical data acquisition Measurement and display system for optical tool measurement Checks correct positioning of cutters on heads Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm Dodpfx Aewvqklsg Dskk • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: good (used), Stenner Eagle resaw 11KW engine Feed speed shifted on belts belt wheel width 900mm cutting band width 75mm Dkedpfx Asvtzkreg Dsk saw tension indicator manual cutting height adjustment manual cutting width adjustment machine in good working order and ready to work. machine dimensions: width 170cm, length 110cm, height 230cm weight +- 1600kg

Condition: ready for operation (used), Planing and re-saw line with below main equipment: 9 head planer type WACO 3000 Feeding speed 0 - 90 m/min Max planing width Min planing width Max planing height Min planing height Dodpfxjxb Aklj Ag Djkk Canali double bandsaw type ML1100 Marking equipment Stacker and packing machine Press for packages Grinding equipment for planer. For more data and information please see below link to youtube

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW Right 11kW Left 11kW Top 11kW outboard bearing Right 11kW Left 11kW Dsdpfx Agoxcft Sj Dekk Top 11kW outboard bearing Bottom 11 kW outboard bearing Bottom 22 kW outboard bearing Possible to add jointers as needed. CNC position on spindles 3,4,6 and 7. Large quantity of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.