Surface planer

Weinig A 510

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg Dedpfjcl Svvjx Ag Dokk

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Dkjdpfx Agjw Nx A Ij Dsk Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: used, Year of construction: 2014, with jointing cutter aggregate including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm Combination milling station with R 2.5 mm radius Technical description: - Hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing aggregate, 40 mm workpiece thickness with jointing aggregate - Maintenance-free, coated glue pot - HF end-trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable insert cutter (combination design) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing aggregates (Hebrock system) - Feed rate approx. 10 m/min - Adjustable cut depth for the end trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view windows from machine rear and operator side - PLC control including touchscreen Technical data: - Feed rate 10 m/min - Panel thicknesses from 8 - 40 mm - Weight: depending on configuration, approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 unit Technical data: - Edge thickness from 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7 – 10 m/min depending on edge material - Ready for operation in 3 min - Air consumption approx. 800 l/min for the entire machine - Power supply up to 32 A / 16 kW for the entire machine, higher power connection required for machines with grooving saw - Extraction as previously - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 unit (up to max. 40 mm workpiece thickness) Including pneumatic saw adjustment Separate pneumatic cutter adjustment, 1 unit, controllable from the operator panel (straight/radius) Dsdsyfp N Dspfx Ag Dekk Buffing station (polishing mop), 1 unit Corner rounding cutter, 1 unit, including combination tool and pneumatic adjustment for chamfer/radius Maximum workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 unit, including pneumatic lift device, Radius R 2.0 mm Flat scraper, 1 unit, with pneumatic insertion control Glue station quick-change system in preparation, 1 unit, without second glue pot, including the ability to process PU adhesive with the machine, without glue discharge system underneath Special cleaning system for PU glue discharge underneath, 1 unit 60 mm panel thickness for machines with jointing, 1 unit; maximum workpiece thickness with jointing aggregate: 60 mm; jointing thickness: 40 – 60 mm; workpiece thickness up to 2 mm Special infeed fence for overloaded panels, 1 unit (16 mm and 19 mm thickness), maximum laminate overhang: 8 mm Separate extraction for jointing aggregate, 1 unit, directly at jointing cutter vertically upward, d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onwards Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Nesting for the combination milling aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Nesting for the radius scraper aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Release agent sprayer, 1 unit Cleaning agent sprayer, 1 unit, to facilitate removal of glue residue Antistatic spray device, 1 unit, mandatory for airtronic; antistatic coolant is sprayed onto the in

Condition: used, Year of construction: 1988, working width: 510 mm, Panhans surfacing and thicknessing planer, model 445-A, 51 cm planing width. Cutter block with 4 straight knives, 2 feed rates, electric table height adjustment. The motor brake is unfortunately defective!!! Otherwise, the machine is in very good condition for its age. Dsdpfx Aoxd D Nbsg Djkk

Condition: used, Year of construction: 1994, Used, good condition, top specification, low hours with 2 rubber outfeed rollers, chain feed roller, electric adjustment Manufacturer: Hofmann Model: DH 510-2 Year of manufacture: 1994 Machine no.: 51/2-490-3452 GS wood dust certified Motor: 4 kW Dkedpeythcljfx Ag Dsk Planing width: approx. 510 mm Planing height: approx. 260 mm Chain pressure bar Chain infeed roller 2 rubber outfeed rollers Feed speed: 7/14 m/min Number of knives: 2 pcs Knife system: strip planer knife, Brück reversible knife Digital height display Electric height adjustment with handwheel fine adjustment Extraction port: D 160 mm Space requirement: approx. 1000 x 1000 x 1500 mm Weight: approx. 800 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: used, Year of construction: 1988, Max. working width: 630 mm; Number of knives: 4 pcs; Cutterhead: Tersa cutterhead; Motor brake: Yes; Max. thicknessing height: 240 mm; Min. thicknessing height: 3 mm; Max. chip removal: 8 mm; Thickness table adjustment: electric/manual with fine adjustment; Thickness display: mechanical numerical indicator; Fixed feed speed: 6/18 m/min; Thickness table spindles: 1 large; Infeed rollers: serrated steel; Outfeed rollers: steel; Soundproofing: Yes; Approx. weight: 900 kg; Motor power: 5.5 kW; Extraction diameter: 150 mm Dedpfxoyq Sflo Ag Dekk Storage location:

Condition: used, Year of construction: 1979, Working width 510 mm Dksdpfxjvxa Igs Ag Dsk Length of the planing table 2700 mm Number of knives 2 St. Dimensions (L/W/H) 2700x1100x1000 mm weight of the machine ca. 1000 kg

Condition: used, KAMRO thickness planer Model MB 6 Motor 5.5 HP / 400 Volt 2-knife cutterhead (strip knives) Planing width 630 mm Planing height approx. 200 mm Feed speed 9 and 18 m/min 2 table rollers Dksdpfxsypbf Ej Ag Djk Knife setting gauge Weight approx. 1000 kg