Eccentric Press - Single Column

WEINGARTEN AR 63

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine Dodpefg Rlcjfx Aaijkn with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min Dsdecubatopfx Aaiokn dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: excellent (used), Year of construction: 2019, operating hours: 19,200 h, functionality: fully functional, machine/vehicle number: 90514 2019, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with chip divider grinding device and saw blade magazine up to D=560mm for unmanned operation. In manual mode: 40-710mm. Saw blade magazine with 3 mounting arbors. Oil filtration system suitable for HSS and carbide (HM), oil cooler brand Polar 2.9. Tooth profiles for HSS: Form A, B, BW, C, and special profiles. TK saw blades can be ground in diameters from 200-500mm. The fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. Equipped with electrostatic air extraction. Dkodpfxjxuq I Es Aaion

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine - Heated stainless steel blades on top - Heated stainless steel blades on bottom - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m Dkjdsykp Dxopfx Aaijn - Set of support arms

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg Dkedpjirax Uofx Aaijn

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m Dedpfx Ajfx Hv Heaiekn hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and secure your price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ————— ✅System contents ►1 unit - Large, gas-heated powder oven ►1 unit - Automatic powder coating booth ►1 unit - Small, electrically heated powder oven ►2 units - Room-type mono-cyclone manual powder coating booth ►6 units - Automatic powder coating guns ►3 units - Manual powder coating guns ►1 unit - Automatic powder recovery unit ►6 units - Mono-cyclone separators ►1 unit - Automatic control panel ►1 unit - Automatic bar movement system (speed controlled) ►2 units - Mobile platforms (speed controlled) ►8 units - Parking stations ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Suspension bars Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You are welcome to schedule an appointment to view the machines. The plant has been in operation for 10 years. As the direct manufacturer, we can modify the machines according to your requirements by mutual agreement. It doesn’t fit your existing installation site? We can adjust the layout accordingly. Please check the system’s PDF file via the link below. Dsdpfoiivq Uex Aaiekn

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull Dsdpjl Tuvdefx Aaiekn -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm Djdpovuuckefx Aaijkn total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel Ø: 175 x 60 x 51 or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm table size: AT-F 205 x 345 mm space requirement: 1070 x 650 x 1180 mm Dksdsbx Elispfx Aaion Drive motor: 500 V (at 380 V 1/3 power loss), corresponding to 0.6 kW