Portal milling machine

Waldrich Siegen Winkelfräskopf ET500

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t Casdet Hwq Rjpfx Abbsa total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Cjdpokwcdbefx Abboaa Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2009, x-travel 3.000 mm y-travel 2.500 mm z-travel 2.475 mm w-axis 800 mm rotary table Juaristi MG-12 Rotary table surface 2.000 x 2.500 mm T-slots 11 T-slot - width 170 mm table weight 8.000 Kg table rotation B- Achse – 0,001 ° Control HEIDENHAIN i TNC-530 diameter of quill 130 mm speed 3.000 U/min tool taper ISO 50 DIN 69871/1-B swivelling +/- 2,5/2,5 Grad spindle drive 30 kW transmission ratio 2 speeds: 0-2.500 U/min boring spindle D`ANDREA UT5-800-S mm/min diameter 800 mm cross travel 250 mm Tools changer 30 pos. Internal cooling system 20 bar Chip coveyor Inkl. handwheel HEIDENHAIN HR-420 weight of the machine ca. 45 t dimensions of the machine ca. 9.800 x 7.320 x 5.500 m -TS-3 head, TS-5 column and longitudinal bed INCLUDED: - Part touch probe RENISHAW RMP-60 - External coolant - 20 bar Internal coolan - protecting guards - mobile operator platform for control Csdpfou D I R Dsx Abbjaa panel - Chip Conveyor - Handwheel HEIDENHAIN HR-420

Year of construction: 1989, condition: good (used), functionality: fully functional, TECHNICAL DETAILS Swing diameter: up to 2800 mm face plate diameter: 2500 mm height under crossbeam: max. 2200 mm workpiece weight: max. 15.000 kg Support: 2 x vertical, 1 horizontal Cjdsmxkzaspfx Abbeaa MACHINE DETAILS main drive: approx. 55 kW Total weight: approx. 56 t

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 332046, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, spindle speed (max.): 850 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 1 m/min, total width: 10,000 mm, total length: 14,000 mm, total height: 4,500 mm, spindle diameter: 160 mm, table load: 40,000 kg, table length: 3,000 mm, table width: 3,000 mm, workpiece weight (max.): 40,000 kg, overall weight: 71,000 kg, drill spindle length: 1,200 mm, year of last overhaul: 2002, power: 60 kW (81.58 HP), The machine is dismantled on stock, it is fully functionable. Caodpfx Absuplptobja

Condition: used, Year of construction: 2017, functionality: unexamined, 🏭 YCM DCV4030B-5AF (Double Column Type) Technical Specifications Specification Description Model DCV4030B-5AF X-Axis Travel (mm) 4065 Y-Axis Travel (mm) 3500 Z-Axis Travel (mm) 1016 Spindle Speed (rpm) 10,000 Tool Magazine Capacity (optional) 40T (optional 60T / 120T) Table Load Capacity (kg) 20,000 Machine Weight (kg) 60,000 ⚙️ Standard Accessories and Features YCM-designed High-Performance / High-Speed 5-Axis Indexing Head HSK-A100 Spindle Taper – 10,000 rpm Spindle and Gearbox Cooling System (air conditioner + oil cooler) Spindle Motor Power: 43 kW (58 HP) High Torque: 188 Nm Head Indexing Angle: 5° (optional 1°) Head Swing / Rotation Range: Tilt ±110°, Rotation ±180° Spindle Air Curtain – prevents moisture and dust ingress Automatic Tool Changer (ATC): 40-tool arm type (optional 60T / 120T) Foot Pedal for Tool Unclamping Rapid Traverse Rates (X/Y/Z): 20 / 20 / 15 m/min Cutting Feedrate: 10,000 mm/min High-rigidity Meehanite Cast-Iron Structure, designed for heavy-duty and high-speed cutting X-Axis: 3 sets of IKO Roller Linear Guideways (each with 5 blocks) Y-Axis: 3 sets of angularly adjusted IKO Roller Guideways Z-Axis: Built-in Box-Type Guideway Hydraulic Counterbalance System for Z-axis Bridge and Column: One-piece casting design Table: Heavy-duty design for deep-cut machining 🧠 Control System Control: FANUC 200FB (Option 1 & Option 2 included) Display: 15.1” TFT LCD color screen High-speed machining block processing time: 0.5 ms Look-ahead function: 5000 blocks Option 1: 4-axis simultaneous machining + tool plane setting Option 2: 5-axis simultaneous machining + tool plane setting TCPM (Tool Center Point Management) DCM (Collision Detection / Prevention System) Kinematic Compensation: Automatic via Cycle 451 Codpfsxcnk Tjx Abboaa Kinematic Calibration Ball: Ø 20 mm Hard Disk: 32 GB + Ethernet connectivity Mouse Pad Function Mold Package (for die & mold applications) Smart NC: 3D graphic display and full graphical conversational programming Rigid Tapping (Tapping without Floating Holder) Helical Interpolation 🧰 Lubrication, Cooling & Safety Systems Piston-Type Automatic Centralized Lubrication System Anti-Crash Protection during Power Failure Wash-down Gun for cleaning chips and interior Air-Blow System for Cutting Tool Cooling MPG (Manual Pulse Generator) Handwheel Screw-Type Chip Conveyor Electrical Cabinet Cooling System Automatic Separation System for slideway oil and coolant

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° Cedpfxsu N Ebde Abbjaa table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Condition: used, Year of construction: 2019, operating hours: 17,529 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,529 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Cjdswgnigspfx Abbjaa Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: ready for operation (used), Travel X/Y/Z: 10500mm/3500mm/2800mm, clearance width: 3515mm, max. clearance height: 2500mm, table dimensions X/Y: 13000mm/3000mm, speed: 700rpm, drive power (renewed in 2025): 110kW. Machine dimensions X/Y: approx. 28300mm/10200mm, control: Mitsubishi E300 1.1x, software update: planned for 2025. Includes belt grinding unit, chip conveyor, chip extraction, various cutter heads, tool holders, disc cutters and face milling heads, support blocks, clamping brackets, and currently dismantled counterweights. Documentation available. An on-site inspection is possible. Caedpfx Ajw Exttjbboa

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t Caedpfx Aeu N D Szebbsa table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *