CNC Lathe

VDF BOEHRINGER VDF 315 Cm / DL 2000

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Kfjdpfxjxcgtgo Aa Esa Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Year of construction: 2023, In the market for a Top of the Range Miyano? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg Kfjdpsw I D Duefx Aa Eja Name of the machine: Miyano ABX-64SYY

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA Kfedpfx Aaeuhb D As Eea - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun - Coolant through spindle - Micro-lubrification coolant - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer - Tool-holders

Condition: like new (used), Year of construction: 2020, operating hours: 400 h, travel distance X-axis: 550 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, Machine Details Stock-No. 1105-04006 Type of machine: Vertical Machining Center Manufacturer: DMG MORI Model: M 1 Year of manufacture: 2020 Control type: CNC Stored at: HAGUENAU, FRANCE Country of origin: Germany Availability: IMMEDIATE Shipping terms: EX WORKS Kedpstpcnnofx Aa Eefa Technical specifications: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm table size: 790 x 560 mm Spindle taper: ISO SK 40 Spindle speed range: 10,000 rpm Feed rates (longitudinal/cross/vertical): 1 - 30,000 mm/min Rapid traverse (longitudinal/cross/vertical): 30 m/min Number of tools in magazine: 20 Max. workpiece diameter at full tool load: 80 mm Workpiece diameter with 2 vacant positions: 140 mm Max. workpiece length: 300 mm Max. tool weight: 7 kg Max. table load: 600 kg Spindle drive: 9 / 11 kW CNC control: SIEMENS 828D Total connected load: 30 kVA Additional Information: CNC SIEMENS 828 D Only 1,800 spindle hours Very good condition Electronic handwheel Chip conveyor Tool setter

Condition: used, Year of construction: 2017, turning diameter: 658 mm, controller manufacturer: MAZATROL, controller model: SMOOTH X, number of spindles: 2, CONTROLS .. CNC controls MAZATROL SMOOTH X BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 WORKING RANGE TURNING .. turning diameter (max): 658 mm .. bar diameter (max): 80 mm .. worpiece length max.: 1519 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 30 kW .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 26 kW .. c-axis: yes X/Z SLIDE .. Z-axis travel: 1585 mm .. X-axis travel: 615 mm Kfsdpoxu Ufzefx Aa Eja .. Y-axis travel: 250 mm .. rotating range B-axis up to: 210 ° .. rapid traverse Z: 50000 mm/min .. rapid traverse X: 50000 mm/min .. rapid traverse Y: 40000 mm/min X/Z SLIDE .. rotating range B-axis up to: 0.0001 ° .. - rotation speeds (max): 12000 /min .. - drive power: 24 kW TOOL MAGAZINE .. number of positions: 72 .. tool diameter max.: 90 mm .. - with free neighbour positions: 125 mm .. tool length max.: 400 mm .. tool weight max.: 12 kg DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4910 mm .. space requirements -front/back-: 2800 mm .. total height: 2720 mm .. total weight approx.: 16900 kg ATTACHMENTS (TURNING) .. hydraulic system: yes .. European CE standards: yes

Condition: good (used), Year of construction: 1990, 1 used surface grinding machine make Rosa type ER 10 year of construction 1990 Technical data Travel 1000 x 600 mm Magnetic plate 1000 x 600 mm maximum sanding height 400 mm longitudinal speed 2-30 m/min Transverse speed infinitely variable 0-3 m/min Sanding spindle speed 1450 rpm Grinding wheel diameter 400 x 60 x 127 mm Ksdpfx Asuuik Soa Eofa Grinding wheel motor power 7.4 KW Dimensions 3900 x 20 50 x 2400 mm Weight 6 tons

Condition: used, Year of construction: 2003, Offset 6 color with coating Roland 706/3B+LTTLV (UV) Year: 2003 Number of impressions (mio): 500 Machine control - RCI - IntelliTrax II density control Feeder - Non-Stop feeder - Logistic system in feeder Printing units - Number of printing unit(s): 6 - Straight machine Kfsdpfjuhtg Asx Aa Esa - APL Full Automatic Plate Change - Automatic blanket washing device - Cooling system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 2 - Number of transfer unit(s): 2 - Tresu chambered ductor blade system - Number of Anilox roller(s): 2 Drying - IR dryer between coating unit 1 and 2 - IR + hot-air dryer in delivery - UV dryer in delivery: Eltosch Delivery - Non-Stop delivery - Powder spray: Grafix Cantronic 3000 - Logistic system in delivery Elevation - Machine raised by (cm): 50 Accessories - Air cabinet: Becker - Cabinets air cooled - Compressed air compressor, excluded

Condition: good (used), Year of construction: 2010, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2010 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel X-axis: 300 mm Travel Y-axis: 300 + 100 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes, among others (list not exhaustive): - CNC machining center Fanuc Robodrill α-T21iFa Kfodpoxflvfofx Aa Esa - 4th axis rotary table - Coolant pump and chip tray Exact scope of delivery as per photo documentation No guarantee is given for the correctness, completeness or currency of the information provided.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 9,400 h, functionality: fully functional, machine/vehicle number: 8662, turning length: 380 mm, turning diameter: 400 mm, spindle bore: 55 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 100 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 380 mm, spindle motor power: 11 W, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 3,500 mm, total width: 1,650 mm, type of input current: three-phase, overall weight: 3,300 kg, bar passage: 45 mm, spindle nose: ASA 5", coolant pump power: 75 W, tailstock quill diameter: 85 mm, number of tool stations in tool turret 1: 12, Equipment: documentation/manual, Biglia B301 CNC Lathe – Used & Refurbished in Excellent Condition Year 2005, used and refurbished, ideal for precision machining of small to medium-sized components. This machine is robust, reliable, and compact, equipped with a bi-directional 12-position turret, automatic tailstock, and hinged belt-type chip conveyor. Perfect for machine shops and companies seeking a high-quality, ready-to-use CNC lathe. Main technical specifications: - Model: Biglia B301 - Year: 2005 Capacity: - Max swing diameter: 400 mm - Max bar working diameter: 45 mm - Max secondary operation diameter: 220 mm - Max machining length: 380 mm Spindle: - Spindle nose: ASA 5” - Spindle bore: 55 mm - Chuck: 3-jaw Autoblok 210 BH - Spindle speed: 100 – 5000 rpm - Spindle motor power: 11 – 15 kW Travel: Kfodpfevw Agvjx Aa Eea - X axis travel: 160 mm - Z axis travel: 380 mm - B axis travel: 440 mm Feed rates: - X/Z axis rapid traverse: 20 m/min - B axis rapid traverse: 12 m/min Turret and tailstock: - Turret: bi-directional, 12 stations - Automatic tailstock: yes - Quill diameter: 85 mm - Taper: MT4 Weight and dimensions: - Machine weight: 3,300 kg - Dimensions: 3,500 × 1,650 × 1,900 mm (h) Included accessories: - Hinged belt-type chip conveyor - 12 static tool holders - Parts catcher (pick-off arm) Condition and availability: - Used machine, tested and in perfect operating condition - Ready for delivery - Machine can be inspected by appointment at our facility - Available for movement testing by appointment at our site Ideal for: precision machining, batch production, and applications on steel, aluminum, brass, and technical materials.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller FANUC Series 18i-MB Table size 1300 x 650 mm Table load 1500 kgs X travel 1100 mm Y travel 650 mm Z travel 600 mm Spindle speed 12000 rpm Tool holder type MAS BT40 ATC magazin 30-fold Weight 7200 kgs Dimensions LxWxH = 3100 x 2300 x 3100 mm Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS Kedpfeuu Rzrsx Aa Eefa - Manuals Very good condition.It will be sold because of liquidation of production.