Lathe - cycle-controlled
VDF Boehringer DUS 400 ti

Name: VDF Boehringer DUS 400 ti
Brand: VDF Boehringer
Availability: InStock

Year of construction

2006

Condition

Used

Location

Germany

Lathe - cycle-controlled VDF Boehringer DUS 400 ti

Basic data

Machine type:: Lathe - cycle-controlled

Manufacturer:: VDF Boehringer

Model:: DUS 400 ti

Year of construction:: 2006

Condition:: used

Price & Location

Location:: Deutschland

Call

Details about the offer

Listing ID:: A22191267

Reference number:: 1092-03037

Update:: 02.09.2026

Description

centre distance 1000 mm
turning diameter over bed 420 mm
turning diameter over bed slide 235
turning length 1000 mm
spindle taper DIN 55027 Gr. 6
control MANUALPlus 4110
spindle bore 51 mm
turning speed range 3 - 3000 U/min
feed: 5.000/10.000 mm / min
drive capacity - spindle motor 11 kW
taper in tailstock-quill MK 4
dia. of quill 70 mm
quill stroke 110 mm
coolant ja/yes
voltage 400 V
Number of working hours 6.908 h
weight of the machine ca. 3 t
dimensions of the machine ca. 3,4 x 2 x 2,2 m
BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006

-Control system: Heidenhain ManualPlus 4110
-11 kW AC main drive with 2-stage gearbox
-Work area cover with chip guard door
-Control panel mounted on the support, moves with the machine
-Holding brake
Hfjdpfx Aezgigdep Ejn
-Programmable cycles
-4-position quick-change turret
-Size 2 tool holder on fixed base
-With 1 WD ‘/25’ tool holder
-Tailstock
-Rapid traverse
-Coolant system
-Machine lamp

Condition:
Machine runs perfectly, no known faults, ready for immediate use.

Accessories:
1 three-jaw chuck 250 mm, bore 62 mm
1 set of hard jaws
4 sets of soft jaws including jaw holders
23 tool holders including tools

Translated with (free version)

Seller

Last online: A week ago

Registered since: 2006

8 listings online

Call

Send inquiry

Telephone & Fax

+49 7082 ... show

+49 7235 ... show

Fax:

These listings may also fit your interest.

Listing

Cycle-controlled lathe VDF Boehringer DUS 400 ti

Oddense

1,150 km

Cycle-controlled lathe
VDF BoehringerDUS 400 ti

€6,000

Fixed price plus VAT

Call

Condition: used, Year of construction: 2004, total length: 3,400 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 3,000 kg, VDF DUS 400 ti Year of manufacture: 2004 FORKARDT F+250 Previously used in the training department of a gear factory. Hodozwbyqopfx Ap Esfn Was in production until approximately 3 months ago. I own this lathe from 2004, as well as a DUS 560 ti from 2004 with a chip conveyor, and a DUS 560 ti from 2005. All three machines come from the same factory and were used together until they were dismantled in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have several chucks for the FORKARDT centering chuck. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

See details

Listing

Vertical machining center HURCO VMX 42 i

Mögglingen

1,367 km

Vertical machining center
HURCOVMX 42 i

Call

Listing

Lathes - Conventional SCHAUBLIN 102N-VM-CF

Matelica (MC)

1,922 km

Lathes - Conventional
SCHAUBLIN102N-VM-CF

Call

Year of construction: 1997, condition: ready for operation (used), - USED - CONVENTIONAL LATHE CENTRE HEIGHT: 102 mm Hedoyvlxqjpfx Ap Esfn DISTANCE BETWEEN CENTRES: 450 mm MAX TURNING DIAMETER OVER BED: 200 mm MAX TURNING DIAMETER OVER CARRIAGE: 120 mm BAR CAPACITY: 25 mm SPINDLE: 50 - 5000 rpm; 3 kW TAILSTOCK TAPER: CM 2 QUILL DIAMETER: 30 mm QUILL TRAVEL: 80 mm TURRET HEAD: MULTIFIX OVERALL DIMENSIONS: 1500 x 510 x 1550 mm

See details

Listing

Flat die thread rolling machine EWM GW62

Wiefelstede

1,085 km

Flat die thread rolling machine
EWMGW62

€4,500

Fixed price plus VAT

Call

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine Hedei Eg Nkopfx Ap Eofn -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

See details

Listing

CNC milling machine Abene - VHF360Ti Abene VHF360Ti

Babberich

984 km

CNC milling machine Abene - VHF360Ti
AbeneVHF360Ti

Call

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hfodpfxextmqts Ap Ejn

See details

Listing

Günzburg

1,407 km

Press brake
TRUMPFTrumaBend V 85 S

Call

Listing

Surface Grinding Machine - Horizontal ELB-Schliff SWN 8 ND

Malsch

1,258 km

Surface Grinding Machine - Horizontal
ELB-SchliffSWN 8 ND

Call

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm Hfedpjunt Iuefx Ap Ejn workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

See details

Listing

Germany

1,414 km

Lathe - cycle controled
WEILERE 35

Call

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 Hjdpfx Aezd Sg Ijp Eofn diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine approx.LxWxH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

See details

Listing

CNC Lathe Giuseppe Giana - GGH 1100/760 Giuseppe Giana GGH 1100/760 x 12.000 CNC

Babberich

984 km

CNC Lathe Giuseppe Giana - GGH 1100/760
Giuseppe GianaGGH 1100/760 x 12.000 CNC

Call

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Hedoyl Uh Sjpfx Ap Ejfn Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

See details

Listing

CNC Cycle Lathe VDF Boehringer VDF DUS 560

Germany

1,293 km

CNC Cycle Lathe
VDF BoehringerVDF DUS 560

Call

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Hsdpfxjxq Eyue Ap Eefn

See details

Advertise here