Lathe - cycle-controlled

VDF Boehringer DUS 400 ti

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Knedpfxouqackj Aa Esf

Year of construction: 1985, condition: ready for operation (used), Table dimension: 1435x460mm, T-groove number/ width/ distance: 5/ 16/ 80mm, controls: TNCi-120, length: 1435mm, width: 2330mm, height: 1648mm, weight: 3,1t, with documentation, accessories are available, no defects known, an inspection is possible. Knedpfx Ajlbmupja Esf

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Kodpfx Aaev Drige Eonf Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing over slide 700 mm Ksdpfx Aswhkdcoa Eonf Spindle bore 128 mm Spindle speeds 6.4-1'600 rpm SIEMENS 810 D control Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, controller manufacturer: Heidenhain, controller model: Mill Plus, table length: 700 mm, spindle speed (max.): 12,000 rpm, 60 tool places. 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Knodpfsu S A Anox Aa Eef Preparation for Blum 3D probe. Probe is not included in the scope of delivery.

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unllog 4000 Kedpfx Aajg Emvhe Eonf Closing 60 TO Year 1997 Scrow 30 mm Injection weight approx. 90 g

Condition: good (used), Year of construction: 2004, Swing over bed Ø 320 mm Swing over cross slide Ø 150 mm DBC Turning Length 750 mm Spindle bore 52 mm Spindle power 16 kW Tailstock spindle Ø 60 Ø Stroke pinole 140 mm Spindle taper 4 Mk Speeds / ranges 3000 Rpm Feed rate X-Axis 1000 mm/min. Knsdpfjwu Dq Ajx Aa Eef Feed rate Z-Axis 2000 mm/min.

Condition: used, Year of construction: 1996, drill diameter 3 - 50 mm drilling length 500 mm Kjdpfx Aop Raizja Ejnf lip angle 90 - 140 ° voltage 380 V weight of the machine ca. 120 kg dimensions of the machine ca. 0,80 x 0,60 x 1,30 m Serial-No.: 76658

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet Knodpfxjvry T No Aa Eef pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, •Turret overhaul in 2021 •Cooling lubricant pump with higher pressure/output in 2021 •Draw tube renewed and headstock re-bearing and ground in 2022 •Prepared for automatic insertion of parts using a robot cell Control: CNC control including color screen Siemens 840 D TECHNICAL DATA Swing diameter max. 550 mm Turning diameter max. 480 mm Turning length 1000 mm Spindle bore 78 mm Drive power (50%) 53 kW Speed range (1-stage) 30 – 4000 1/min Drum turret Number of holders 12, of which 6 are driven Cylindrical shaft holder 40 mm Speed range (2-stage) 20 – 2500 1/min Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C. axis  Tailstock dragged via program including various centering points  12-way drum turret  Turret drive device  Chip conveyor  Coolant device with reinforced pump, approx. 4 bar Knedpfx Aaovr Tkzo Eof  Interface for automation  Various accessories  1 Heimbuch Spanntop SK 80, without collets  1 Schunk Rota NCF 315 three-jaw chuck  1 Schunk Rota NCF 250 three-jaw chuck  1 Schunk Rota NCF 250 two-jaw chuck  1 WTO impact head  2 driven tools CAPTO-Axial tool  2 driven tools CAPTO-Axial Radial tool  3 driven tools CAPTO-Radial tool  7 fixed tool holders  Installation elements  Documentation