Center Lathe

VDF BOEHRINGER 36 S

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: Gbsdpfx Afov Rgzwo Tsp 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch Gbjdpfx Ajymznhsf Tjp >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: reconditioned (used), Product information "Voest Alpine DA 160" Voest lead and feed spindle lathe Model DA 160 Condition: Refurbished Technical data Center height: 165 mm Distance between centers: 650 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 190 mm Bed width: 210 mm Lead spindle diameter: 25 mm Chuck diameter: 160 mm Tailstock spindle: MK 3 Gbsdpfx Afey Ndqro Tep Spindle speed (16): 30 - 2500 rpm Motor power: 2 / 2.4 kW Quill stroke: 100 mm Dimensions (L x W x H): 1500 mm x 900 mm x 1650 mm Equipment: - Geometry report - 3-axis digital display, Sino brand - NEW - 3-jaw chuck - Emergency stop button - Quick-change tool holder system Multifix, number of holders 6 - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with taper shank - Follower point - Lead and feed spindle cover NEW - Chuck guard, limit switch secured - Operating tool - Operating manual - Machine feet

Condition: used, functionality: fully functional, spindle bore: 65 mm, turning diameter over bed slide: 520 mm, Lead and feed screw lathe Manufacturer: Heidenreich & Harbeck, Model: VDF Technical data Brand: Heidenreich & Harbeck Model: VDF Year of manufacture: unknown Control: conventional Centre distance: 1,500 mm Swing over bed: 520 mm Spindle bore: 65 mm Dimensions: L 3.60 x W 1.20 x H 1.50 m Machine weight: approx. 4 t Equipment Gedpoy A H Akefx Af Tobp - 2-axis digital readout - 1,500 mm scale not included All data without guarantee. A powered demonstration can be arranged at any time in our exhibition hall.

Condition: good (used), Year of construction: 1970, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 52 mm, turning diameter: 360 mm, center height: 180 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 750 mm, total height: 1,400 mm, spindle speed (max.): 1,750 rpm, spindle speed (min.): 60 rpm, overall weight: 1,800 kg, Conventional lathe, center high 180 mm, between centers 1000 mm, bore Ø 52 mm, 12 speed 60 - 1750 rpm, motor 4 kw, camlock 5'', ; equipement: coolant device, 3-jaws chuck Ø 200 mm, tool post MULTIFIX with 7 toolholders, steady rest, lamp, dimensions 230x115x165 cm, weight ca. 1750 kgs Godpfox Dl Nvjx Af Tsbp

Condition: excellent (used), Year of construction: 1997, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, turning diameter over top slide: 210 mm, Model: Student 2500 Gap Bed Lathe Swing Over Bed: 330mm Swing Over Topslide: 210mm Swing In Gap: 480mm Distance Between Centres: 1000mm Spindle Speeds: 40-2500 RPM Spindle Bore: 40mm Motor: 2.2 KW Machine with: Gsdoy N Uplspfx Af Tobp 3 Jaw Chuck Collet Chuck and Collets Digital Readout Quick Change Toolpost with Holders Dimensions: 2130 x 1020 x 1450mm High Weight: 800 KGS

Condition: used, Year of construction: 1971, turning diameter 1000 mm turning length 1000 mm swing diameter over bed slide 255 mm spindle head 6 spindle bore 56 mm Gbedpfxjzhciuo Af Tjp dimensions of the machine ca. 3 m

Condition: good (used), Year of construction: 1978, turning diameter over cross slide: 430 mm, spindle bore: 82 mm, turning diameter: 640 mm, center height: 320 mm, center width: 3,000 mm, quill stroke: 250 mm, total length: 5,600 mm, total width: 1,300 mm, total height: 1,900 mm, swing diameter over cross slide: 430 mm, bed width: 430 mm, Turning diameter in gap: 850 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 9 rpm, Conventional lathe, center high 320 mm, between centers 3000 mm, bore Ø 82 mm, 27 speeds 9 - 1800 rpm, motor 18,5 kw, nose DIN', dimensions 560x130x190 cm, weight ca. 5000 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck FORKART Ø 400 mm, tool post RAPID with toolholders, steady and following rest with roller pin Gbodpfjzin Nijx Af Tsp

Condition: used, Year of construction: 1981, Immediately available from a workshop for disabled workers: L & Z lathe VDF Type D 480 / 1000 Year of manufacture 1981 Center height 240 mm Gbedpfxjzi Hqxs Af Tep Diameter over bed 480 mm Diameter over cross slide 320 mm Spindle bore 60 mm Distance between centers 1000 mm Spindle speeds 11.2 - 2240 rpm Drive power 7.5 kW Digital display Chuck Tool holder Coolant system Weight 2.5 tons