Welding robot

Valk

Condition: refurbished (used), Year of construction: 2009, used Timesavers model 22-Series-900-WB with wet extraction Technical data: Year of manufacture: 2009 Machine is completely overhauled – New conveyor belt – New rotary brush Working width: 900 mm Abrasive belt dimensions (W x L): 1900 x 930 mm Machine built in accordance with CE Main switch, emergency stops Disc brake Electrical specifications: Power: 28.05 kW Electrical connections: 3-phase Voltage: 400 V Current: 55 A Frequency: 50 Hz Ffjdpoxc H Rfefx Adaet Unit 1: Contact roller unit, Ø150 mm Contact roller 45° Shore Fine adjustment Dial gauge on contact roller Rotational alignment with feed Main motor 7.5 / 15 kW Oscillation Unit 2: Brush unit Brush Ø200 mm “Clean-Strip” 17CS02 polish no. 6 2 directions of rotation Dial gauge Fine adjustment Oscillation Motor 11 kW

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Ffedpfx Aew Dfhzedajt

Condition: excellent (used), Year of construction: 2006, operating hours: 1,000 h, machine/vehicle number: 233229, Electrode power max.at 6 bar 7000N Fedpoitcp Iefx Adaoft Machine dimensions W 5.315 x L 6.199 x H 2.435 Weight 4,5t

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Fsdpfxegta Rcs Adajft Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: used, Year of construction: 1988, pressure 100 t chamfer lenght 2050 mm distance between columns 1550 mm throat 250 mm stroke 200 mm adjustment of press crosshead 200 mm stroke speed - idle stroke downwards 105 mm/sec stroke speed - idle stroke upwards 180 mm/sec stroke speed - under load 9,5 mm/sec table width 200 mm table height over floor 900 mm dayligth 280 - 480 mm back stop - adjustable 3 - 729 mm Ffsdpfx Aotqqyqjdaot control CYBELEC SYNCHRO control CNC 7400 PS total power requirement 7,5 kW weight of the machine ca. 10 t dimensions of machine L x W x H 3,70 x 2,00 x 2,80 m - 4 axis controlled - Accessories: programmable back gauge, table extensions, various upper and lower dies segments

Condition: used, TVM2.1-50-220-300-W1-220-380 TDM1-2-50-300W1-220V TDM1-3-030-300-W1-0 TDM1.2-100-300-W1 TVM2.1--50W1-220V TDM1.2-100-300W1 TDM1.2-100-300-W1-220 TDM1.2-100-300-W1-220 TDM1.2-100-300W1 TDM1.2-100-300-W1 TDM1.2-100-300-W1-220 TDM1.2-100-300W1 TDM1.2-100-300W1 TDM1.2-100-300W1 TDM1.3-100-300-W1 TDM1.2-100-300W1 TDM1.2-100-300W1 TVM2.1-50-220-/300-W1-220/380 TDM1.2-050-300-W1-220/S102 TDM1.2-100-300-W1 TDM1.2-100-300W1S0102 12100-300Wi TDM1.2-30-300W0 TDM1.2-050-300-W1-220 TVM2.1-50-220/300-W1-220/380 TDM1.2-050-W1-SO102 TDM1.2-100-300W1S0102 TDM1.2-100-300-W1-220 TVM-2.1-50W1-220V TDM1.2-050-300-W1 TDM1.2-050-300-W1-000 TVM2.1-1-50W1-220V TDM1.2-100-300W1S0102 TDM1.2-100-300-W1 TDM1.2-100-300-W1-0 TDM1.2-50-300-W1 TDM1.2-100-300W1 TVDI1.3-15.03 Ffsdofd Tlmjpfx Adaot TDMI1.2-050-300-WI-000 TDMI1.2-030-300-WO TDMI1.2-050-300-WI TDMI1.2-50-300-WI TDM1.2-30-300-WO-1/93 TDM1.2-30-300-WO TDM1.2-30-300-WO TDM1.2-30-300-WO TDM1.2-030-300-WO TDM1.2-30-300-WO TDM1.2-050-300-WI-000 TDM2.1-030-300-WI-2 TDM1.2-30-300-WO TDM1.2-30-300-WI TDM1.2-030-300-WI-220 DD503.1-W030-RA02-02-FW KDS1.1-100-300-WI-220 KDS1.1-150-300-WI-220 KDS1.1-050-300-WI-220 KDV3.1-100-220/300-220 KDS1.1-050-300-WI-220 KDS1.1-100-300-WI-220 KDA3.2-150-A00-WI Used Indramat parts Price on request

Year of construction: 2020, condition: ready for operation (used), A Panasonic welding robot cell with two rotary tables is available. Fixture contour rotary table/per side: 3800mm/1200mm, working height: 900mm, robot: TM-2000, positioner: PanaDice, max. load capacity: 2x1000kg, welding cell: PA-ET-2PD-XL, torch equipment: ATU011060. Overall system dimensions X/Y/Z: approx. 7050mm/4100mm/2500mm, weight: approx. 5300kg, control: Siemens PLC S7-1200, HMI: Siemens KTP 900 Basic. Documentation vorhanden. An on-site inspection is possible. Fsdpfxex Auppj Adajft