Center Lathe

UWM 320 x 900 Vario/DRO

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder Nsdportd Uwjfx Aa Eslk - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, Year of construction: 1988, x-travel 310 mm y-travel 340 mm z-travel 170 mm total power requirement 2,5 kW Nlodpfx Aet Hxatea Esk weight of the machine ca. 900 kg dimensions of the machine ca. m

Condition: new, Center length ----- 500 mm Center height ----- 125 mm Turning diameter above bed ----- 250 mm Turning diameter above slide ----- 150 mm Spindle intake ----- MK4 Passage of main spindle ----- 26 mm Bed width ----- 140 mm Spindle speed ----- 80-1600 rpm Loose head ----- MK3 Nsdepz Iy Ajpfx Aa Eolk Motor ----- 750W Lathe equipped with automatic longitudinal and transverse feeding Includes: lower case, 3-jaw chuck, 4-jaw chuck, chuck, fixed goggles, moving goggles, CE shield

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the Nlsdpfx Ajk Egrpja Ejk switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min Nlodocuntzepfx Aa Eok standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: excellent (used), turning diameter over bed 280 mm turning diameter over slide rest 160 mm turning length 500 mm centre height 140 mm centre distance 500 mm spindle bore 36 mm spindle turning speed range 15 - 3550 U/min spindle head DIN 55022 Gr. 5 feeds - longitudinal 0,008 - 0,560 mm/U feeds - cross 0,004 - 0,280 mm/U thread - mm pitch 0,2 - 12 mm dia. of leadscrew 24 mm lead of leadscrew 6 mm tailstock taper MT 3 tailstock quill stroke 90 mm tailstock adjustment out of the central pos. 15 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions of machine L x W x H 1,40 x 0,70 x 1,20 m - machine out of teaching shop - Accessories: DRO on 3 axis, 4-jaw chuck RÖHM 140 mmø, MULTIFIX-head A, Nodpfx Aewm Rmusa Eelk

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Nledpfx Aev Ifxisa Ejk Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix tool holder, 24 longitudinal feeds, Metric thread, Inch thread,

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Nedpjrn Swkjfx Aa Eolk Foot pedal Includes all the accessories shown in the pictures.

Condition: used, machine/vehicle number: 242350148, -WT 106- Nedpjlf Evcjfx Aa Eolk Offered here is a table drilling machine of the company Flott of the type TB23L. The table drilling machine stands on a special lifting table (no original lifting table). Technical data: - 6-fold speed adjustment (manual via belt pulley). - MK2 receptacle

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Nlsdjd I A Dhjpfx Aa Eok Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm