Vertical machining center

Unisign Uniport6000

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams Fpjdpsx S Rx Iofx Afnoc • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Spindle passage: 80 mm Turning length max: 750mm Turning diameter: 340mm Power: 22kw Number of tool holders: 12 Shaft diameter: 40 Fpodpjh Dzqljfx Afnec Powered tools in all positions X axis Z axis C axis Automatic tailstock chip conveyor

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. Fsdovvh T Sepfx Afnopc A video of the machine is available.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. Fpedjvvh R Djpfx Afnec A video of the machine is available.

Condition: used, Year of construction: 2009, x-travel 800 mm Fpodpfxjx Rur Aj Afnec y-travel 700 mm z-travel 550 mm Control Heidenhain TNC 530

Condition: good (used), Year of construction: 2005, Unisign Uniport 6000 portal milling machine, year of manufacture 2005, Siemens 840 D control, Travel X/Y/Z 3000/3000/1000 mm, C-axis for turning operations, Fpjdpfxsyhb Tas Afnsc Table Ø 2500 x 2000 mm, max. turning diameter Ø 3000 x 2500 mm, max. turning height 1000 mm, Angular head for side machining, 2.5° Hirth serration, Spindle speed up to 6,000 rpm, Spindle power 36 kW, Mount HSK 100, Tool changer for 30 tools, 3D measuring probe, Chip conveyor, Faceplate Ø 2000 mm, Max. faceplate load 10,000 kg, Machine weight 45,000 kg.

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 Fodpfx Afju Rnluonopc - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, Equipment: documentation/manual, Zayer mobile column milling machine, horizontal stroke 10000, vertical stroke 2500, slide stroke 1250, spindle 1800n, tool magazine 30 positions, year 1994, Heidenhain 415b control with 15" LCD display replaced last year, cone grinding October 2024 (iso50), always serviced. Currently in use. Fpjdpfx Afewhd Alonoc

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, overall weight: 14,000 kg, Equipment: rotational speed infinitely variable, Milling machine retrofitted in 2024 CNC TNC 530 HEIDENHAIN Distance between columns 1250 mm Fpjdpfsul Txzsx Afnjc HSK 63 ELECTROMANDRINO spindle 12.000 rpm INTEGRAL fairing

Condition: good (used), Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich Fpsdpfxofxlf Aj Afnjc -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg