Complete pipe extrusion line

Unicor UC 500/40 iV

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. Nsdpfx Adowu Tu Dobowc - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA Nwodjvivygjpfx Adboc weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *

Condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,212h. Nedpfx Ajl Eyq Rodbswc

Condition: good (used), WEBER tube extrusion line including: Njdpfx Adsvryhyjbowc WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller Nwedpfxou E E Suo Adbsc 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 Nodpfx Adjdt Rgvebswc VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Automatic machine for producing plastic bags for T-shirts or shopping bags Manufacturer: COSMO Nedpjrww E Iofx Adbowc Model: ST-99 Bag size: - length: 350 - 650 mm - width: 160 - 365 mm - thickness: 0.008 - 0.05 mm Throughput: 180 - 300 pcs/min Installed power: 12 kW Power supply: 230 V, 3 phases, 50/60 Hz Dimensions: 7150 x 1600 x 1750 mm Additional air compressor required: 10 hp - not included Technical condition: used machine

Year of construction: 2015, condition: used, W and C Profile Production Line for Sale Njdpjxhf R Ijfx Adbewc Designed for the production of road barriers, posts, and fastening elements. Fully equipped line suitable for continuous industrial manufacturing. The line consists of: - Two decoilers - Post production line - Parapet (guardrail) production line - Two presses for fastener manufacturing Technical specifications: Length: 17 m Width: 1 m Height: 1 m Motor power: 22 kW Weight: 18 t Year of manufacture: 2015 Manufacturer: Chengxing Machinery (China) Purpose and advantages: This W and C profile production line is designed for manufacturing various road safety components: detachable road barriers, support posts, and fastening parts. The equipment ensures a reliable, stable, and consistent production process. The machine is available for inspection. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1994, System: Decanter / centrifuge, used Manufacturer: Alfa Laval Nwjdjvz Dddjpfx Adbec Model: ALDEC 406 Mach. No. 512-0006.01 Year of manufacture 1994 Maximum drum speed 4000 l/min Drum inner diameter

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Nodsu A U Utepfx Adbswc The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.