Dust extraction blower 0.37 kW

unbekannt Anschluß 190 mm

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Todpsd Id Ugjfx Akijd Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Base frame

Condition: ready for operation (used), Width: 1000 mm Length: 1500 mm Plate height: 195 mm Height of the feet: 600 mm Tjdpfx Akegq Nawjied Total height, working height: approx. 800 mm Weight:

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Used machine - Mitutoyo Crysta Apex C776 Here I am offering a very well-maintained 3D coordinate measuring machine from the manufacturer Mitutoyo. The machine was built in 2005. The machine was only used in an air-conditioned measuring room. This is a TOP-equipped machine that you can start using straight away! We can of course offer you transport, assembly and commissioning as well as calibration (factory or DAkkS) so that you don't have to worry about the individual things! The machine equipment can be adapted to your wishes after consultation. The machines usually have a rotating and swivel head with the corresponding button and modules. A change rack can be offered if this is not already included. We can of course also offer you an upgrade of the software. Todpfjv Dg Taex Akijd See PDF or picture for specifications. Leasing on request. (All prices are net plus VAT.)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Tedpfenxkcqjx Akied Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h Tsdjnkan Hspfx Akied At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: excellent (used), Year of construction: 2004, Conveying and dosing equipment Brand: A. Tschritter Tsdped Twgcsfx Akijd Type: WC 100 Year of manufacture: 2004

Condition: new, Year of construction: 2016, Technical data: Model SA-1300 Point angle can be continuously adjusted for Ø 2-6 mm from: 118° to 135° Point angle can be continuously adjusted for Ø 6-13 mm from: 90° to 144° Collet set for drill diameters: 3 to 13 mm Collet type: ER 20 CBN grinding wheel (for HSS drills): Ø 78 mm Tjdpfx Aerfb Sekied Optional diamond grinding wheel (for carbide): Ø 78 mm Motor: 120 watts Spindle speed: 5300 rpm Electrical connection: 220 volts / 50 Hz Weight: 10 kg Documentation: Detailed operating manual and machine documentation in German Remarks: The SA-1300 drill sharpening machine is designed for sharpening and pointing 2-flute drills made of HSS or carbide*, in the diameter range of 3 mm to 13 mm. *Carbide drills can only be sharpened with the optional diamond grinding wheel. Spare parts and replacement grinding wheels are available from stock.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2280 mm Todpovz Hq Tsfx Akied Weight 500 kg Total power requirement 1 kw

Condition: used, TECHNICAL DETAILS Tsdpfjug U Rgex Akiod - Objectives : 1.5X et 0.5X - Light : OLYMPUS HIGHLIGHT 3001

Condition: new, Type DC9030 Air delivery 3900 m³/h Inlet diameter 3x100 mm Fan diameter 300 mm Bag capacity 307 l Collector bag ø 480 × 4 3 phases Motor power 2.2 kW Weight 63 kg Tsdpfxjfiiwuj Akijd