Conveyor belt 51 m/min

unbekannt 6630 x 340 mm

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Isdpfxjwzzivj Ag Ustb Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos Itodpfomidtrox Ag Ujb -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, DROZDOWSKI PRP 58 FRAME SAW complete with accessories: - Chain cross conveyor - Chain longitudinal conveyor - Hydraulic system - Roller outfeed table - Saw blade sharpener - Set saw set tool Machine underwent a complete overhaul at the manufacturer's facility – perfect condition. Technical Specifications: Horizontal frame clearance: 580 mm Vertical clearance between rollers: 350 mm Saw frame stroke: 300 mm Main shaft speed: 330 rpm Feed rate: 0.5 - 2.5 m/min Blade dimensions (L x W x thickness): 815 x 70 x 1.6 mm Maximum number of blades: 12 pcs Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Minimum length of log to be sawn: 1.8 m Minimum board thickness (standard): 13 mm (9 mm with single blade setup) Log cutting height above ground: 880 mm Isdpfoxawddex Ag Uetb Track height above ground: 600 mm Roller pressure: hydraulic Overall dimensions of saw: 1.20 x 1.70 x 2.10 m (H) Total length of line with track: 10.00 m Weight with standard equipment: 3500 kg

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Isdpfjdx Elmox Ag Uetb Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas Isdpfx Ajv Si Szjg Uetb 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1980, machine/vehicle number: GUS 71 Typ 26.813, Full frame saw from Wusterer & Dietz including: Frame saw Saw tensioner Ijdpfx Agov Ummbo Ujtb Riving knife Frame roller conveyor 4-strand puller Viewing by appointment.

Condition: excellent (used), Year of construction: 2005, I sell the 4-Side brushing machine suitable for windows, doors, tables, etc. Ijdpfxjd Raqko Ag Ujtb Futura MS120 Y1 X2, year 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side brushing heads left - right H.170mm 2 bottom heads left - right Nylon W.140mm Oscillating top head W.260mm Big brushing heads top - bottom W.1150mm Machine equipped with heads on the pictures. Available immediately.

Condition: used, VACUUM DRY KILN for massive wood second han machine volume: 10 m3 Iodpfx Agexxladj Ustb diameter: 150 cm n.12 aluminum plates with loading trolley machine overall dimensions: total length: cm.630 width: cm.185 weight: kg.3000

Condition: like new (used), Year of construction: 2022, How do you do? We are offering you our cross-cut saw from MS Maschinenbau in very good condition. Technical data: Lengths between 600 mm - 3000 mm Iedstykw Sopfx Ag Ujtb Workpiece thickness min. 3 mm max. 100 mm feed 5-30 m/min stepless Roller table is included Condition is as good as new If you are interested, the machine can also be tested. If you have any questions, please contact us.

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Iedpsu Rl Sfsfx Ag Ustb Motor 18.5 kw frequency-controlled for variable speed without vibrating chute