Replacement rolls for profiling machine 20 pcs.

unbekannt 20 Stück

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Kedpfjf Eywwjx Aa Esnf Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Year of construction: 2025, CFM-01 MACHINE FOR CUTTING PROFILES Kedpsfwxxnefx Aa Eonf The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, it provides quick and convenient cutting of profiles.

Year of construction: 2011, condition: reconditioned (used), Boschert tool grinding machine EASY SHARP Equipped for Trumpf tooling system (Amada system optional) Machine for punching tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Kedpfxoid I T Ij Aa Eonf Used machine is currently being overhauled Equipment for Trumpf tooling system up to size III Accessories: Tool holder for punch flat and whisper Die holders for size I, II and III New corundum grinding wheel Dressing diamond Cooling system and machine base revised Technical data: Grinding wheel diameter 175 mm height adjustment 150 mm working area 400 x 150 mm motor power 2,2 kW Motor speed 2825 rpm Optional adapter for Amada system available Pictures similar

Condition: ready for operation (used), Year of construction: 2005, A Stopa heavy-duty high-bay racking system for panel storage is available. Total loading capacity: 51t, storage units: 17, max. storage unit load: 3t, max. panel dimensions X/Y: 1525mm/4050mm. Documentation available. On-site inspection is possible. Knodpfx Ajwf Nyqoa Eof

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Knsdpfxjrn Swkj Aa Eef Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

Condition: new, The KHS E 1000 Manual Guillotine Shear is an essential tool in any locksmith's shop, designed for the precise and robust cutting of large steel plates. This classic manual plate shear features a sturdy cast-iron construction, ensuring durability that can withstand the demands of multiple generations of use. With a working length of 1,040 mm and the ability to handle plate thicknesses up to 1.5 mm while maintaining safety, it combines efficiency with operator comfort thanks to its counterweights and adjustable table stop. The KHS E 1000 also includes a conveniently adjustable back-gauge, making it easier to produce consistent cuts. Request a quote today to enhance your sheet metal processing capabilities with this reliable manual guillotine shear, a perfect fit for any guillotine shears category. Kodpfxsn D Ehvo Aa Esnf

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Gz7iapb All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries... Knedpfxsnq Di Tj Aa Esf

Condition: new, Pressure capacity 40 t Folding length 1270 mm Clearance between the uprights 980 mm Projection 200 mm Installation height 320 mm Stroke 100 mm Working speed 10 mm/s Drive power 4 kW Dimensions L x W x H approx. 1950 x 1450 x 2100 mm Weight approx. 3200 kg Accessories / special features: - Manual operation for the motorized plunge depth and the backgauge o Ball screw spindles o Fine adjustment via handwheel - Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 50 x 50 mm with several V-openings - Back gauge with ball screws, length = 600 mm - Only one working speed 10 mm/s for all vertical movements, therefore no light barrier is required! - Front support arms - Suspended control panel - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Exclusive representation! Knedpfxogiud Ho Aa Esf Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Kjdpfx Asdzqblja Eenf Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: new, Welding system for sliding tarpaulins, 2.7KW HF power. Operation via touch panel, automatic power control, with integrated quiet compressor on request, with table and guide rail. Also available without a table on request, e.g. when replacing existing systems such as Herfurth PLTR300/400, the guide is adapted to the table. (Image 2) Table frame made of aluminum profile, 30mm worktop, length as desired We currently have between 4 and 6 months of construction time Image 3 a mobile PSA150 system with 15KW power and Image 4 an SP45 for sliding with 4.5KW All data and inquiries are welcome by email Kodpfx Ajvw S Snea Ejnf