Hydr. univ. sheet notching machine

BOSCHERT K 30-120

Condition: used, Year of construction: 1989, Year 1989 angle stop 30 -120 Grad good condition . Anschlag weight 600 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Kedpfsliuihex Aa Ejnf +++++

Condition: excellent (used), Year of construction: 2008, Operating hours: approx. 20,000 h Kjdpfx Aaoxvqawj Eonf

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Fab. BOSCHERT Type. K30-120 Very good condition, year 1994 Technical data Make BOSCHERT Type: K30-120 Year of manufacture: 1994 cutting capacity: 6 mm in St 40 / 4 mm in Niro blade length: 200 mm cutting angle: 30-120 working stroke: 40 mm table height: 900 mm Connected load: 6 kVA weight: approx. 1600 kg dimensions: approx. 1500 x 1200 x 1300 mm All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall. Kjdpfx Aajhygztj Esnf

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² 4 mm at 600 N/mm² Stepless angle adjustment 30 - 120° Drive power approx. 4 kW Knodpexrylbjfx Aa Eef

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Kjdpfxjxn Dhlo Aa Ejnf Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: good (used), functionality: fully functional, Year of construction: 1989, sheet thickness steel (max.): 6 mm, table height: 900 mm, power: 4 kW (5.44 HP), overall weight: 2,150 kg, total length: 1,550 mm, total width: 1,200 mm, total height: 1,350 mm, cutting length (max.): 200 mm, Hydraulic notching machine, adjustable angle 30-120°, cutting capacity 6 mm, cutting length 200 mm, punching station on the back siede, footpedal, accessoires Kjdpjvkg Nuofx Aa Eonf

Condition: used, Year of construction: 1989, Used notching machine from Boschert Model: K 30 120 Adjustable angle Knodpfjw Rvk Eex Aa Eof Pneumatic clamping of the corner Year of manufacture: 1989

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head Knodpfx Ajg N Nl Doa Esf - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out. Knedexabpdepfx Aa Ejf

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 6 mm, table height: 900 mm, overall weight: 1,550 kg, total length: 1,500 mm, total width: 1,200 mm, total height: 1,250 mm, cutting length (max.): 200 mm, Hydraulic corner shear with infinitely adjustable angle between 30 and 120 degrees. Capacity St 40 max. 200 x 200 x 6 mm, Rvs 200 x 200 x 4 mm. Equipped with 2 stops with degree graduation and foot pedal for operation. Kjdpfx Aewqfwcoa Eenf

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material Kedpfx Ajfg E Hpja Esnf can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.