Double miter saw (saw units only)

unbekannt 2,5 kW 2850 U/min

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm Hodpfx Asgylq Iehnjfi -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min Hjdpfel Tuvdox Ahnofi -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, Year of construction: 1996, Vollmer CHC 260 Year of manufacture: 1996 Hfjdeyuc Ifopfx Ahnsi

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location Hedpjv Si Szofx Ahnefi

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Hfedpowzzivjfx Ahnji Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: excellent (used), functionality: fully functional, mileage: 638,700 km, first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, Year of construction: 2019, Equipment: ABS, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, Single-owner vehicle, always serviced exclusively at an official DAF workshop, with full, certified invoices and documentation available. Hjdpoyg H Rujfx Ahnofi Features: High-roof cab, alloy wheels, metallic paint, stainless steel side bars, PTO/hydraulic system, independent air conditioning, leather interior, manual gearbox, fitted with spoiler, alloy wheels, hydraulic system, in-cab TV, independent climate system, spare wheel, retarder, leather interior, front tires /55, rear tires /70. REGULARLY SERVICED WITH CERTIFIED AND GUARANTEED MILEAGE. Leasing and/or financing options available up to 60 installments, with the best rates available on the market. 12-month warranty available on request. The vehicle description may contain discrepancies compared to actual features, which must be checked on site. This listing does not constitute a contractual obligation under any circumstances. For further information or clarification, please contact the numbers provided, including via WhatsApp Direct. Mr. Paolo Antonio Gorgoni Photo documentation is taken on-site at our locations, so the photos are genuine and show the current condition of the vehicle. Please also note that the system automatically displays equipment and accessories, which may lead to some discrepancies. To ensure maximum accuracy, we invite you to always verify features and specifications directly with us.

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047 Hjdpfxswtmg Do Ahnjfi

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Cycle press for finger joint connections Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm OPTIONAL Hsdpfx Ahst Sc T Ienefi with hydraulic unit

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Hsdpfsht Rl Esx Ahnjfi Length: 100-1200 mm

Condition: excellent (used), Year of construction: 2016, 5 axes CNC glass working center for max. glass sizes 4050 x 2300 mm machine fro grinding , milling , drilling , bevelling 0-90° , engraving and sawing max. thikness peripheral wheel : 80 mm Hfodpjv U Abzefx Ahnji electro spindle : 15 Kw electro spindle spindle speed : 12000 rpm 2 x 14 positions rotating tool change store left + right + 8 postions tool change on heads board ( next to the electro spindle ) tool rack iso 40 weight : 7500 Kg