TFT industrial monitor

unbekannt Mikron 12,1" 2363130 Mikron UME 600

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz Tsdjfc R D Ajpfx Akiod -Dimensions: 700/300/H670 mm -Weight: 49 kg

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg Todpfx Akoqwlmqoied

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment Todpowwlvljfx Akied *

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Tsdpfoxb Uq Dsx Akijd Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Condition: ready for operation (used), Year of construction: 2003, A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible. Tedpfx Aszrn Iqekijd

Condition: like new (used), Tax repair for Heidenhain controls We repair different control types of Heidenhain company for example: TNC 111, TNC 121, TNC 131, TNC 135, TNC 145, TNC 150, TNC 151, TNC 155. We also have a large number of exchange controls in our range. Tjdjfica Nepfx Akisd

Condition: refurbished (used), functionality: fully functional, turning diameter over cross slide: 370 mm, spindle bore: 105 mm, turning diameter: 600 mm, center height: 300 mm, turning length: 1,500 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 20 rpm, type of input current: three-phase, GORNATI LEGOOR 300 parallel lathe Overhauled and fully refurbished Guides re-ground Guides, lead screws, bed, etc., restored New electrical system. Todpezzq Nvsfx Akiod OMAP self-centering chuck with double guide. Tool turret with 5 tool holders. Tailstock. Center height 300 mm Distance between centers 1,500 mm Diameter over bed 600 mm Diameter over cross slide 370 mm Diameter in the bore 890 mm Bar capacity 105 mm 16 speeds Spindle speed 20-1,500 rpm.

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm Tedpfofc Hfvjx Akied -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm Tjdpfju H Acyox Akijd - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: ready for operation (used), Year of construction: 1995, turning diameter over cross slide: 560 mm, spindle bore: 100 mm, turning diameter: 560 mm, turning length: 3,000 mm, Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Passage: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: kg Blue year: 1995 Options: Tools included Movie available! Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Tube diameter: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: 0 kg Year of manufacturing: 1995 Options: Includes tools Movie available! Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements We are also looking for industrial machines all year round. Tjdporfw Nwjfx Akied If you have redundant machines, email them to us with photos and information. Padovani Labor 275 E Electronic Teachin Drehmaschine Drehdurchmesser over the bed: 560 mm Carriage door diameter: 100 mm Drehlänge: 3000 mm Transport abmessungen (LxWxH) 490x140x160 cm Weight: 0 kg Construction year 1995 Optionen: Inklusive Werkzeug Film verfügbar! Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen