Cylindrical Grinding Machine

Tschudin HTG 400

Condition: repair required (used), The TSCHUDIN HTG400 is available as a source of spare parts. Mechanically, the machine is in good condition. Gedpeyt E Irsfx Ag Iebt Electrically, the machine needs to be inspected and repaired. The drive motors are in good condition. The machine is being offered as a source of spare parts.

Condition: excellent (used), KELLENBERGER Gbjdjzhma Djpfx Ag Iot PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms Gedpst Hwnpsfx Ag Isbt

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Gbjdpfov Hqlrex Ag Iet Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - center height : 175 [mm] - Table orientation : 9 [°] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] - Boring for internal spindle : 90 [mm] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK - Internal cone : Morse 3 - Quill stroke : 30 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2860 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Kelco 5 display - Coolant tank Gedpozfqzasfx Ag Iebt * with paper filtering unit - 1 internal grinding spindle : 5400 [rpm] - Chuck 4 jaws - 1 three-key steady rest - Set of wheels

Condition: good (used), Machine is in good condition with equipment. Gjdpfxowu Ey Eo Ag Isbt

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Gbsdpet Hw U Asfx Ag Iet Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm Godpszaunzefx Ag Iebt table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine approx.LxWxH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Heidenhain measuring device *

Condition: excellent (used), Year of construction: 2010, grinding length: 330 mm, grinding wheel diameter: 250 mm, total width: 1,765 mm, total length: 1,830 mm, total height: 2,441 mm, grinding diameter: 20 mm, type of input current: three-phase, workpiece diameter between centers: 20 mm, spindle speed (max.): 10,000 rpm, feed length X-axis: 29 mm, feed length Y-axis: 350 mm, feed length Z-axis: 100 mm, feed rate X-axis: 29 m/min, feed rate Y-axis: 350 m/min, feed rate Z-axis: 100 m/min, grinding spindle motor power: 9 W, grinding spindle speed: 7,600 rpm, overall weight: 3,000 kg, input frequency: 50 Hz, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, input voltage: 400 V, workpiece spindle speed (max.): 3,000 rpm, Equipment: rotational speed infinitely variable, Rollomatic ShapeSmart NP5 — CNC cylindrical grinding machine (pinch/peel) with 3-axis loading robot Year of manufacture 2010 · CNC pinch/peel cylindrical grinding machine · Ø 0.025–20 mm · 3-axis loading robot Five-axis pinch/peel cylindrical grinding machine from Rollomatic SA (Le Landeron, Switzerland) for the rough and finish machining of cutting tools, punches, micro-drills, and forming and ejector pins. The original factory invoice from Rollomatic from 2010 for this machine is available, which documents the design, drives, axis travels, and included equipment. KEY DATA - Grinding diameter Ø 0.025 – 20.0 mm · Shank diameter Ø 1.0 – 20.0 mm · Grinding length max. 330 mm - Control system GE FANUC 320iA, 8 axes (5 machine axes + 3 robot axes), NanoGrind user interface on PC - Roughing spindle 8.5 kW, wheel Ø 250 mm, max. 7,600 min⁻¹ · Finishing spindle 1.4 kW, wheel Ø 150 mm, max. 10,000 min⁻¹ - Workpiece spindle with collet chuck W20, 0 – 3,000 min⁻¹ - Axis travels Y 350 mm · Z 100 mm · X and V each 29 mm with glass scale, resolution 0.00005 mm - Loading robot 3 axes, workpieces Ø 1.0 – 16.0 mm, length 30 – 300 mm, magazine 150 – 1,000 pieces - 1830 × 1765 × 2441 mm · approx. 3,000 kg · 3 × 400 V, 50 Hz, max. 15 kW WHAT MAKES THIS MACHINE SPECIAL Gbedpfszvh Uxox Ag Ijt - Pinch/peel process: Roughing and finishing wheels engage with the workpiece simultaneously — high accuracy of roundness and short cycle times in one pass SCOPE OF DELIVERY - Machine complete: Machine bed, full splash guard, electrical cabinet, pneumatics unit, control panel with 15" screen and PC keyboard - Control system GE FANUC 320iA with 8 axes, Rollomatic NanoGrind user interface on PC - P4Smart software for offline programming and simulation - Roughing station with 8.5 kW spindle (90° design) and finishing station with 1.4 kW direct drive spindle, both with PerfectArbor mounting - Monoblock shank guide with pneumatic pressure lever - Workpiece spindle with collet chuck W20 - Integrated three-axis loading robot with base plate for Rollomatic cassettes - Cassettes and collet chucks from the machine's inventory — the exact scope will be listed definitively for the shipping date - Transport-safe packaging on a wooden pallet, loading onto your truck included - Coolant filter and cooling system as well as extraction are not included in the scope of delivery — both were centrally installed at the previous owner - Fire extinguishing system and grinding wheels are not included in the scope of delivery AVAILABILITY AND INSPECTION Availability: End of September 2026, ex warehouse Velten. Demonstration, trial grinding and measurement only after prior appointment — installation and commissioning will be carried out by an external service partner. PROCESSING Location 16727 Velten near Berlin (Germany) · FCA Velten incl. loading · 100% prepayment · Delivery 1–2 working days after payment receipt · Price on request · All technical data in the attached data sheet. Technical data according to manufacturer's documents (Rollomatic factory invoice from 2010 for this machine and series catalog) — information provided, no agreement on characteristics within the meaning of §§ 434, 443 BGB. We will confirm individual values definitively during the inspection or upon specific request. Subject to errors and prior sale.

Condition: used, functionality: fully functional, Maximum workpiece length: 500 mm Minimum workpiece length approx.: 5 mm Maximum workpiece length for plunge grinding: 50 mm Max. grinding diameter without steady rests: 100 mm Max. diameter: 240 mm Workpiece Swivel: 90° Grinding spindle slide Min./max. swivel: 30° Min./max. transverse movement including 300 mm quick adjustment: 100 mm Wheel diameter after rotation 1st degree: 320 - 400 mm 2nd degree: 260 - 320 mm Max. workpiece weight between centers: 60 kg Gbsdpswhp D Uefx Ag Ijt Max. workpiece weight in chuck: 20 kg Max. workpiece weight in faceplate: 20 kg 8 workpiece spindle speeds: 45 - 500 rpm Min./max. Tilt: 12° Min./max. longitudinal travel: 2 - 500 mm Infinitely variable table travel: 0.5 - 5 m/min Handwheel adjustment: 2 and 20/rev