Used Tschudin Cylindrical Grinding Machine for sale (64,522)

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm PLUS HYDRAULIC MOVEMENT DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD Fjdpfx Asy Nmg Asnrjpg SPARE SWIVELLING WORK HEAD RANGE OF TOOLING

Condition: used, JONES SHIPMAN 1305 EIU CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1305 EIU CENTRE HEIGHT 185.0 mm MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS HEIDENHAIN DRO INTERNAL SPINDLE ATTACHMENT Fpjdpfsy Hi Epox Anrog EXTENSIVE RAGE OF TOOLING AND ACCESSORIES RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK CLEAN

Condition: excellent (used), Jones & Shipman 1076 Universal Cylindrical Grinder Capacity 10" x 27" Hydraulic Feeds Swivel Wheelhead Variable Speed Swivel Workhead Serial Number BO 94944 Plunge & Intermittent Feeds Internal Grinding Spindle Fpsdpoy Nzxyofx Anrsg Low Volt Light Coolant Note: External Guards and Extraction not included

Condition: ready for operation (used), Year of construction: 1994, Studer S30-1 Year of manufacture: 1994 Fpodjy Rmxuopfx Anreg

Condition: excellent (used), operating hours: 4,589 h, functionality: fully functional, center height in crank: 100 mm, center height: 100 mm, grinding length: 400 mm, studer S20-2 centre height 100 mm max. grinding length 400 mm internal and external grinding coolant filtration system large amount of accessories cabinet documentation Fodoy R D Rnepfx Anrepg machine is powered on for inspection

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Kellenberger URS175/800 (2 units) Year of manufacture: 2013 and 2014. Capacity: Centre height 175 mm; Centre distance 1000 mm; Grinding length 800 mm Accessories: Coolant system, internal coolant supply (IKZ), paper filter, MARPOSS probe, MOVOMATIC measurement control, internal grinding attachment, balancing unit, RS‑232 interface. Based on the documentation (2012 offer), I have summarised the technical data for the KEL-VISTA URS 2-3 175 / 800 GE FANUC 21i: Key Data · Centre height: 175 mm · Centre distance: 800 mm (note: 1000 mm in price list) · Grinding length: 400 mm (note: 800 mm in another table) Connection Data · Supply voltage: 3x400 VAC / 50 Hz or 3x460 VAC / 60 Hz · Power consumption: max. 25 A · Compressed air requirement: min. 6 bar / approx. 2.5 m³/h · Coolant system: 80 l/min at max. 3 bar / 160 l/min at max. 1 bar Fedpfx Anoy Nz E Herspg Ambient Conditions · Room temperature: max. 40 °C · Air humidity: max. 75 % Weights & Floor Load · Weight (centre distance 800 mm): approx. 3,500 kg · Floor load: 8,000 N/m² Axes · X-axis (grinding slide): AC drive Fanuc, direct ball screw, resolution 0.1 µm · Z-axis (table): AC drive Fanuc, resolution 0.1 µm · Swivel range (table): 6° for 175/800 Grinding Head (Type URS) · Wheel dimensions: 450 x 63 x 203.2 mm (right) · Tool holder taper: 1:10, Ø 63 mm · Drive power: 6.0 kW · Speed range: 875 – 1,900 rpm · Peripheral speed: max. 40 m/s (T2: v constant) · Swivel system: Hirth toothing (1° indexing), swivel range -210° / +10° · Internal grinding device: belt-driven, own water-cooled motor (stepless) Workpiece Spindle (Standard) · Mount: MK 5 / external taper DIN 55026 size 5 · Roundness (plunge grinding): Delta R < 0.4 µm · Capacity in overhung position: 100 Nm, max. 80 kg · Capacity between centres: max. 100 kg · Speed range: 1 – 800 rpm (AC drive, programmable) · Positioning accuracy: < +/-0.5° · Swivel range: -10° / +100° Tailstock (Note) · Quill riveted, in preloaded ball guides · Hydraulic or pneumatic tailstock pressure selectable Control · Type: GE FANUC 21i (3-axis CNC, conversational support)

Condition: used, Year of construction: 2003, Technical details: grinding length: 1500 mm centre height: 325 mm weight of the machine ca.: 12 t Karstens EMAG H310 Universal Grinding Machine Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Fpodex Hgilopfx Anrog Reinforced workpiece spindle, load capacity up to 250 kg Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Siemens 840D control system *

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Fpedpsyx Hx Djfx Anrsg Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: used, Technical details: grinding diameter: 250 mm grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm folded disc width: 200 mm spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min Fpsdpoyzptiefx Anrjg traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t

Condition: good (used), Tos Hostivar cylindrical grinding machine Fpodoq H Ap Njpfx Anrsg Type: 1U X-path: 900 mm bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Dimensions: 150x105x140 cm LxWxH

Condition: used, Year of construction: 1984, grinding diameter 630 mm grinding length 3000 mm workpiece weight 2500 kg grinding wheel diameter 750 mm voltage 400 V Table Swivel 5° - 0° - 5° Internal Grinding Attachment Marposs Steadies Dresser Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Fodpfeyyqhxox Anrspg than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, grinding diameter 800 mm grinding length 4000 mm Control SIEMENS Simatic OP3 grinding wheel diameter 800 mm spindle speeds 0 - 70 mm voltage 400 V 2 x Heavy Duty Steadies Coolant System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Fpedpfxsyqtwie Anreg If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1998, Erwin Junker BUAJ BN29C CNC Universal Cylindrical Grinder Excellent condition Can be viewed underpower and demonstrating if you wish to visit. Year 1998 Fanuc series 35i CNC Control Weight 2800kgs Dimensions approx 3000mm x 1850mm x 1800mm Specification - Distance between centres - 800mm Centre table clearance 150mm Work piece weight between centres, max 120kg Machine working capacity IT4 ISO Wheelhead Grinding wheel, max diameter - 400mm Grinding wheel, max, width - 63mm Grinding wheel, clamping diameter - 127mm Motor power - 5.5kW Grinding wheel, max. peripheral speed - 45m/s Wheel head, path of adjustment - 300mm Wheel head, adjustment angle - +45°/-15° Workhead Spindle taper - MK5 Spindle, stepless speed control - 23-291 or 56- 700rpm Work head, adjustment angle - 90° Tailstock Taper - MK4 Tailstock barrel, stroke 30mm Taper ratio, fine adjustment +/-0.15mm Fodpfx Aeyvupxonrjpg Longitudinal feed Table travel 756mm Table, working travel speed 0÷7.5m/min Top table, swiveling +/8°30

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment Fodpfxeh U Rznj Anrepg

Condition: used, Year of construction: 1992, Technical details: grinding diameter: 50 mm grinding length: 100 mm centre height: 100 mm Fjdjy Nk Hyopfx Anrjpg centre distance: 200 mm

Condition: used, Year of construction: 1989, Technical details: Fjdpfx Ajy Nk Hmonrjpg grinding diameter: 300 mm grinding length: 540 mm centre height: 175 mm total power requirement: 20 kVA centre distance: 1000 mm

Condition: used, Cylindrical Grinding Machine: Schaudt Model: RFH 500 Condition: used Centre height: 100 mm Centre distance: 500 mm Spindle speeds: 2225 / 2500 / 2825 rpm Fpodpfx Asy R Dlfonreg Grinding wheel diameter min./max.: 200 - 300 mm Weight, approx.: 1900 kg Equipment: - Manual & automatic operation - Coolant system - Machine lamp - Emergency stop button - Machine leveling feet

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Fedpfx Aevca Izjnropg Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), ESTARTA 312 Centerless cylindrical grinding machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Workpiece, diameter: 1-5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0-1 mm Work feed: Stepless Speed, grinding wheel: 1300 rpm Weight: approx. 4000 kg Dimensions: 1.5 x 0.4 x 2.0 m SCOPE OF OFFER Including: (non-exhaustive list): Grinding wheel (mounted), regulating wheels (mounted), grinding pads, complete operating documentation. Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information. Fpsdjr Igy Rjpfx Anrog

Condition: excellent (used), AGATHON 150 SL2 Centerless cylindrical grinding machine TECHNICAL DATA Working wheel: Diameter: 150 mm width: 50 mm Bore: 50 mm Regulating disk: Diameter: 100 mm Width: 50 mm Fedpfx Aer Hdi Aonrspg Bore: 40 mm Workpiece diameter: Minimum: 0.1 mm Maximum: 12 mm Max. Length for plunge-cut grinding: 49 mm Weight: 750 kg Connected loads: 3 X 380 V / 50 Hz Compressed air: 5-6 bar Dimensions: Machine: 1000 x 500 x 880 mm Electrical cabinet: 1550 x 540 x 420 mm Coolant tank: 750 x 550 x 700 SCOPE OF OFFER U.A: (list not exhaustive): Grinding wheels regulating wheels Spare flange mandrel Grinding pads Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Travel distances Max. grinding diameter: 500 mm Max. grinding length: 2000 mm Max. workpiece weight: 500 kg between centers Swiveling of grinding head: +45 / -15° (manual) Grinding wheel: 500/80/203 mm Accessories: - Steady rest - Enclosure Fpodpfx Anjy Idtqereg A video of the machine under power can be provided upon request.

Year of construction: 1998, condition: ready for operation (used), An internal cylindrical grinding machine Jung C8, which was modernized by Retza, is available. Grinding diameter range: 6mm-50mm, max. grinding depth: 80mm, speed: 1000rpm, machine dimensions X/Y/Z: approx. 2100mm/1400mm/1400mm, weight: approx. 2000kg. Without grinding spindle and without inverter for it. An on-site inspection is possible. Fpedpfx Anjy R Drrjrsg

Condition: good (used), Year of construction: 2008, functionality: fully functional, center height: 180 mm, grinding length: 1,000 mm, grinding wheel diameter: 508 mm, grinding diameter: 350 mm, !!!ATTENTION: ON-SITE SALE IN 74219 MÖCKMÜHL!!! External cylindrical grinding machine TACCELLA ELEKTRA Evo 1018 MPC Year of manufacture: 2008 Control: Fanuc 21i Grinding diameter: max. 350mm Grinding length: max. 1,000mm Equipment: - 2 grinding spindles for straight and angular plunge grinding on one shaft - Grinding spindle head manually swivellable Fpsdpfjy N S Hnsx Anreg - Prepared for internal grinding - Tailstock - Automatic balancing system - Probing system for length and diameter of workpiece - Structure-borne noise sensor - Coolant system (KSS) - Oil mist extraction unit Many grinding wheels and accessories included

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 - Regular maintenance carried out - Documentation available Fedoy Dibxjpfx Anrepg Special accessories: - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. The disclosure or transfer of the data provided by us is not permitted without our express written consent. Translated with (free version)

Condition: used, Year of construction: 1997, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm weight of the machine ca. 6 t Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis C-Achse zum Polygonschleifen B-Achse mit Handschwenkung Schleifscheibendurchmesser links 400mm Schleifscheibendurchmesser rechts auf Anfrage Innenschleifeinrichtung Reitstock mit Feinverstellung Fpsdpfxsy R Ed Nj Anrjg