CO2 Laser Cutting Machine

Bystronic Bysprint Pro 3015

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! TECHNICAL DETAILS Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Sheet thickness steel: 20 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Todezwmn Tspfx Ac Teb Machine weight: 12,000 kg Laser weight: 1,700 kg EQUIPMENT 2 cutting heads with 5-inch and 7.5-inch lenses

Condition: excellent (used), Year of construction: 2008, MESPACK type H-180-FE powdered sugar bagging machine Year 2008 Filling in 2 stages 1 filler fills half, 2 filler fills other half Capacity: 50 bags per minute. Cartoning machine OTOR SYSTEMS type FCR 214 Capacity: 5 cartons of 10 bags per minute Year 2011 Tjdpfetn Rarex Ac Tjb

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm Todpfx Acoycuyps Tob - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Todpoxxa Ucsfx Ac Teb

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Tjdexrcnlspfx Ac Teb

Condition: used, Used Trumpf 5axis laser for sale / 3d laser for sale Used Trumpf 5axis laser for sale / 3d laser for sale Trumpf TLC Cut 5 Year 2006 Fully serviced twice a year by Trumpf Uk Last service January 2019 New vacuum pump fitted – 28/05/19 Hours: Beam on: 14,922 hours Laser on: 59,480 hours 3.2kw Fully serviced. Jigs / cutting beds included. Tedpfx Acjfuah No Teb Delivery and installation can be arranged.

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 Tedjyyxlfepfx Ac Teb No Tailstock Automatic doors Tool eye Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 52334, travel distance X-axis: 2,750 mm, travel distance Y-axis: 1,060 mm, travel distance Z-axis: 1,550 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 1,060 mm, feed length Z-axis: 1,600 mm, rapid traverse X-axis: 7,000 m/min, rapid traverse Y-axis: 7,000 m/min, rapid traverse Z-axis: 7,000 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, spindle speed (max.): 1,600 rpm, spindle speed (min.): 5 rpm, table width: 900 mm, table load: 8,000 kg, table length: 3,000 mm, mount diameter: 1,200 mm, table height: 600 mm, total height: 2,850 mm, total width: 2,450 mm, total length: 4,900 mm, type of input current: three-phase, rotational speed (max.): 1,600 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 8,000 kg, overall weight: 16,000 kg, Equipment: rotational speed infinitely variable, ZAYER BF3 3000 HEIDENHAIN TNC150 ZAYER BF3 3000 HEIDENHAIN TNC 155 ZAYER BF3 3000 HEIDENHAIN TNC 155 ZAYER BF3 3000 HEIDENHAIN TNC 355 4 fully functional machines can be demonstrated under power Tedpfjyn Ir Aox Ac Tjb Price of machine with TNC150 Magnetic tables not included

Condition: excellent (used), pressing force: 150 t, table width: 3,100 mm, For sale: 1 used High quality / very good condition Bystronic Xpert 3metre x 150ton cnc pressbrake with powered lifting aid Bystronic Beyeler Xpert 150×3100 Make: Bystronic Tedsttl D Nspfx Ac Tob Model: Xpert150 Year / new: 2010 Total axis: 9 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 - and Powered Front Lifting Aid Hydraulic tool clamping Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 150ton Fully serviced with Bystronic Uk General Information: Model: XPERT150x3100 Manufactured: 2010 Specification: Working length mm 3100 press force kN 1500 stroke mm 315 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150

Condition: new, Year of construction: 2026, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 300 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: electric, total height: 2,275 mm, total length: 4,060 mm, total width: 3,315 mm, overall weight: 1,700 kg, Equipment: documentation/manual, The 2128 PANA ATC is a next-generation DANIBRUM CNC router, designed for modern workshops and manufacturing facilities seeking high productivity, consistent precision, and efficient automation in a single, fully integrated machine. Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine offers rapid tool changes and extended flexibility for processing a wide variety of materials: particle board, MDF, solid wood, plastics, Alucobond, and composites. The robust machine frame is supported by 25 mm linear guides, helical rack and pinion drives M1.25, and 750 W servo motors, ensuring fast, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, allowing fine speed adjustment and stable performance under load. Tjdpfxjymcncs Ac Tjb The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing.