Milk & dairy production

TETRA PAK VOLUME CHANGE KIT A3 FLEX 200/250 SQUARE

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Gjdpfsh Nrh Usx Aayjca Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: Gcsdoq Auhdspfx Aayoa - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 11/2026, year of last overhaul: 2025, tank capacity: 180 l, Spiral kneader Diosna Model: SP 120 F /T Dough temperature display Mobile kneading machine with locking device, 2 timers, 2 speeds via programmable control Stainless steel bowl and spiral Dough mixer with reverse button Flour dust cover Gcodpfxov At I Ue Aayea for up to 120 kg Dimensions: 800 x 1350 mm (W x D) Connection: 400 V, 32A-CEE plug Used machine, overhauled & SAB-inspected with warranty Option: Maintenance contract Service package E-Box Delivery service Instruction & commissioning We offer the largest selection of spiral kneaders available for immediate delivery!

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Godpsnpbhvofx Aayjca

Condition: good (used), functionality: fully functional, Used machine in very good condition, was in operation last year. Gjdpfx Aaovr E Edsyjca

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg Gcjdpeh Ha Ipsfx Aayoa 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: new, Year of construction: 2023, total height: 1,850 mm, warranty duration: 12 months, input voltage: 380 V, power: 1.5 kW (2.04 HP), 1000L stainless steel mixer . All tanks are made to order . Gjdpfx Aajqqhzfjyeca It is possible to make mixer from 100 to 3000 liters . We make : Mixers , Heaters , Pasteurizers , Cheese boilers and others . The given price is an example .

Condition: used, Crossbeams: 2700x120x50 mm – 63 pieces 2700x120x50 mm – 1 piece 1800x100 mm (ideal for chipboard): 1 piece Frames: 5200x1000x95 mm – 17 pieces 4600x1000x90 mm – 4 pieces 2300x1000x95 mm – 2 pieces Gjdpfoh Izr Usx Aayeca If you require racks or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and collision protection, push-through protections, chipboards, wire meshes, rear wall grids, and depth supports are available. Shipping: Please inquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Changes and errors in technical data, specifications and prices as well as prior sale reserved!

Condition: as good as new (ex-display), Centrifugal pump Alfa-Laval FM-1A Material: stainless steel, medium: fruit concentrate/fruit juice, flow rate 20.000 l/h, delivery head approx. 25m, power approx. 3 kW, speed approx. 2.900 1/min, inlet/outlet DN50 1 VA-tank, vertical, cylindrical, closed 1 VA-subframe for pump and tank Gcodpfx Aaehryyhsysa

Condition: like new (used), Year of construction: 2024, functionality: fully functional, BRAND NEW COMPLETE KRONES CAN FILLING LINE Capacity: up to 90,000 cans per hour. Manufacturer: Krones Year of manufacture: 2023/2024 Condition: Brand new, unused, never installed, still in original packaging Availability: Immediate Electrical Voltage: 440 V Frequency: 60 Hz Products: Beer, Carbonated Soft Drinks (CSD), Non-Carbonated Soft Drinks (Non-CSD) Filling temperature: 4ºC Compatible Can Formats: – 355ml – 204/202 – 355ml – 204 Sleek – 330ml – 211/202 – 473ml – 211/202 Secondary Packaging Options: – Tray with film – Film only – Pad with film Pack Formats Supported: – 6 x 4 – 3 x 2 – 3 x 4 Gcjdpfxjxc E Rwe Aayoa Pallet Dimensions: – 1240 x 1100 mm – 1200 x 1100 mm – 1220 x 1020 mm – 1080 x 935 mm Line Composition: - PRESSANT UNIVERSAL 1A Container Sweep-off Depalletizer - CANTRONIC 709 D Empty Can Inspector - MODULFILL VODM-C 4.320-150-90 Can Filler - CHECKMAT 731 FM-X Inspection Unit - Foam Cleaning Module - LINAFLEX LC33.0-573-31 Product Treatment Unit - VARIOPAC PRO TFS-8 Shrink Packer - MODULPAL PRO 1AD Palletizer - LINADRY S2M Container Dryer x2 - CHECKMAT 731 FM-X Inspection Unit - SYNCO S Container Conveyor - MULTICO S Pack Conveyor - PALCO S Pallet Conveyor - Can Lid Feed Unit - OMEGA Stretch Wrapper - SYNCO Conveyor Lubrication System - Container Coding/Dating Unit - SYNCO Can Vacuum-Assisted Conveyor Coder - SYNCO Can/Liner Rinser – Linear Rinser - SYNCO Drip Pan Pipework System - SYNCO Can Vacuum Inspection System - Pack Inspection System - VJ 1620 UHS Pack Coding/Dating Device - Pallet Labeller - Uninterruptible Power Supply (UPS) - Electrical Power Distributor - Infield Cable Ducts and Cable Trays - Internal Machinery Piping For further information or to arrange an inspection, please contact us.