Center Lathe

Tacchi MT-BM330

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm total power requirement 45 kW weight of the machine ca. 5.500 kg Itjdpfx Aijt Hw Iiefsg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 23036, Offer 23380 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max. distance machined base plate - drilling spindle 1050 mm - Column diameter 160 mm Isdpfxerckw Is Aifetg - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: used, Year of construction: 2003, CNC Tool Grinding Machine Schneeberger NORMA CFG Year of manufacture: 2003 Center height: 210 mm Table length: 950 mm Table width: 310 mm Iedpfx Asxz R T Uoifotg Travel X-axis: 380 mm Travel Y-axis: 280 mm Travel Z-axis: 280 mm Grinding wheel diameter: 50–200 mm A-axis grinding head rotation: 360° C-axis tool rotation: 340° C-axis spindle resolution: 0.001° Tool holder: HSK 50 Grinding spindle speed, stepless: 0–9000 rpm Hydraulic unit: 6 bar Connection: 3×400 V / 50 Hz Spindle power: 7.5 kW Total power requirement: 33 kVA Machine weight: approx. 5,500 kg Machine dimensions Length: 1,930 mm Width: 1,590 mm Height: 2,250 mm Control system: GE Fanuc Series 16-M Accessories: various grinding wheel mounts and tool holders Max. operating current: 3×40 A No guarantee is given for the accuracy, completeness, or timeliness of the information.

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Itodeu Ix Dcopfx Aifeg Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Itjdpfx Ajyhhuwjifjg Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. We cordially invite you to cooperate! Isdpfx Aov Rpn Toifotg

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm coil weight: 20 t Ijdpjupg Scefx Aifotg coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm Itedou Nfvuepfx Aifsg total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm Ijdpjqw Akmefx Aifotg coil weight: 10 t

Condition: ready for operation (used), Year of construction: 2001, spindle motor power: 45,000 W, total height: 2,120 mm, overall weight: 11,500 kg, controller manufacturer: SIEMENS, controller model: 810 D, product length (max.): 5,400 mm, number of axes: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine. • Working area: • Center distance: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed slide guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Turning spindle: • Spindle head DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% ED): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gear stage 1: 1–280 rpm • Speed range gear stage 2: 4–900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill internal taper: MK 6 • Machine dimensions and weight: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul services: • Hardening and grinding of all bed guides • Grinding of tailstock guides • Overhaul of the complete bed and cross slide assembly (grinding/scraping all guideways) • Renewal of the bed slide's sliding lining • Renewal or relining of the keyways and bottom guides • Renewal of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (MK 6 taper regrinding), replacement of spindle and nut • Adjustment of the tooling system • Replacement of the main spindle motor • Checking of the auxiliary motors (X- and Z-axis) • Overhaul of existing safety devices (sliding hood/jaw guard) • Replacement of all rotary, toggle, and limit switches • Replacement of the spindle and handwheel encoder • Replacement of the movable cables and coolant hoses in the work area • Replacement of the central lubrication unit • Renewal of the energy chains • Painting according to specifications (standard textured basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional equipment • 1x used lathe chuck Ø630 mm with various jaws • 1x used faceplate Ø1100 Itedpfx Aisx D Hz Tjfeg • 1x used steady rest, max. Ø300 • 1x used chip conveyor