END CUTTING SAW ELECTRONIC PUSH FEED

Stromab TR 500 MATRIX

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Fpsdpfx Ajhw Ng Ijd Nop Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Very well preserved drying chamber system with 2 x 5 individual chambers. Year of construction 1990 and 2000. 8 units made by Brunner and Hildebrand and 2 units WSAB. See photos for dimensions. Drying chambers can still be viewed in operation until the end of September. Easy to dismantle as completely bolted! Complete with Lignomat control system. Control cabinets and wiring. Fpodpst H I R Uofx Ad Nep

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1000 kg Total power requirement 8,5 kw Fodpfx Adov A Htdo Nopp

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 0-256-23-1012, Operating hours recorded: 361.69 h Working width: 1350 mm Wide belt width: 1350-1380 mm Wide belt width: H/X 1370 mm Cross belt width: 150 mm Belt change side: left Working height: 900 mm Workpiece thickness: 3-160 mm Feed speed: 2.5-13 m/min Workpiece detection: High-precision workpiece detection with a 12.5 mm pitch; multiple loading of complex parts Units: 1. Cross unit (1350 mm) (T3/5), Continuously variable, frequency-controlled cutting speed 2-16 m/s, MPS 2.0 Plus (1350 mm) electromagnet. Articulated pressure bar Drive motor 13.5 kW 2. X-shaped unit (1350 mm) (T3/5) with internal lamella belt and steel contact roller for mounting an articulated pressure bar with three options: - Calibration sanding with profiled contact roller - Veneer and lacquer sanding without lamella belt - Veneer and lacquer sanding with lamella belt Continuously variable, frequency-controlled cutting speed 2-18 m/s MPS 2.0 Plus (1350 mm) Electromagnetic articulated pressure bar Fodpfx Aev T Nnfod Nepp Drive motor 18.5 kW 3. U-shaped unit (1350 mm) (T3/S/7/9) Universal unit for mounting round brushes on interchangeable frames and disc brush cassettes. Terminal controlled adjustment of the brush feed and thus the immersion depth, continuously frequency controlled brush oscillation 36-240 strokes/min. Switchable Rotation direction in either forward or reverse rotation Drive motor 15 kW Cutting speed 130 - 1000 2 carriages for easier changing of brush units on interchangeable frames (service carriage for U-unit) 1 structuring brush, diameter 300 mm 1 satin brush, diameter 300 mm 4th brush unit with structuring brush Drive motor 5.5 kW Brush material: Anderlon K 80 Diameter 150 mm Cleaning system with integrated ionization device with 16 rotating nozzles and suction nozzle Sanding belt dimensions 1370 x 2150 mm Vacuum clamping device 5.5 kW, vacuum blower integrated into the machine Machine control terminal touch screen Additional 2 roller conveyors, each L = 3000 mm, W = 1300 mm Various Sanding belts P24-P100 (approx. 50); extraction piping; mobile sanding belt holder (6 arms) Operating voltage: 400 V, 50 Hz Space requirement: L x W x H: 2566 mm x 2100 mm x 2415 mm Weight: 5500 kg Machine dimensions: 2600 x 2030 x 2000 mm Location: 32683 Barntrup

Condition: new, Year of construction: 2025, Working width: 600 mm Working height: 220 mm minimum workpiece length: 250 mm aggregates: 4 1. saw-cutting aggregate Random System: saw-cutting optics 2. brush : metal, diameter 220mm 3. brush : Tynex grit 60, diameter 220mm 4th brush : Tynex grain 120, diameter 220mm Height adjustment: hand wheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power saw-roughening gate: 1,1 kW Motor power brushes: 4 kW Motor power feed: 0,37 kW Machine length: 2800mm machine width: 1500mm Fjdpfxehwrp Ro Ad Nopp Machine height: 1600mm Weight: 1500kg

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Seba timber dryer External dimensions 18m length Fjdpfx Adevhtp Ns Nepp 6m width 5m height

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 Fpsdpfxoqprk To Ad Nsp - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Pallet length max. 4500 mm Fpsdpfx Aevvutxed Nsp Pallet width max. 2250 mm 20 nail feeders 19 nail hammers Hydraulic motor 15 kW

Condition: good (used), Year of construction: 2020, usefull lenght : 6000 mm blades 550 mm Fodpfxsvvauue Ad Nopp cutting angles: -45°/+15° extra pneumatic clamps Labelprinter Software Pro and Slice HMI importdriver

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes Fodevu Hd Topfx Ad Nopp 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...