Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Duelq Usfdkbhokvuot - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2021, Functionality: fully functional, Stöcklin EFP 35 OSS Prisma Low-Lift Pallet Truck with Cross-Side Seat for paper rolls - cable reels - reels Year of Manufacture: 2021 Battery: 2022 / Lithium Ion Duelq Ukvswc Akksujt (tested by a specialist company on March 26, 2025, with report) Operating Hours: 291 Rated Capacity: 3500 kg Prisma Forks Long Wheelbase Fork Length: 1900 mm Width over Forks B3: 1600 mm Fork Height Lowered: 280 mm Fork Lift: 205 mm Device Width: 800 mm Floor Plate – Adjustable Function Load Rollers 2 x 200 x 55 in Cast Polyamide GSPO with Charger (tested by a specialist company on March 26, 2025, with report)

Condition: excellent (used), Year of construction: 2020, total height: 7,800 mm, pallet spaces: 8,186 euro pallets, Manufacturer: STOW Dolq Ukju Tuipevusut Year: 2020 Condition: Perfect Pallet capacity: 8186 pallet positions Racks Height: 7800 mm Frame depth: 1600mm/1100mm Frame type: PLFB 17 Upright: 120x65x2 S355 SKU: 256 Batch size: 24; 32 pallets Price for all blocks (if purchasing the entire lot): 53,000 EUR For smaller quantities, we will provide a custom offer. If interested, please contact us for more information.

Condition: used, Frame: 6000 and 8000 mm Traverses: 2700*100 mm Load capacity: 2400 kg/compartment If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves and accessories and are happy to support you with your planning. Additional accessories such as: Duolq Ukvjv D Ix Douet Frame, corner and impact protection, push-through protection, chipboard, gratings, rear wall grilles, depth bars available. Shipping: Please enquire about the shipping costs, stating your postcode and location, as well as the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information and prices, as well as prior sale!

Condition: used, Year of construction: 2010, 110 meters of Schäfer shelving Freely configurable heavy-duty shelving system from Schäfer Dslq Uort Ih Njkvujut Variable use Shelf depth: 80 cm Shelf width: 128 cm Shelf height: 3.28 m This shelving system can be easily dismantled and assembled. The aisle lengths can be freely configured. There are 6 shelves per bay are currently installed. We would be happy to plan the new use with you. Schäfer shelving systems are characterized by their durability and modularity. Scope of delivery: - over 110 meters, - 3.28 m high - 6 shelves per field - 128 x 80 cm General conditions: The system can be dismantled by the buyer by the buyer. Timing: The plant will be used until summer 2024, Visits during ongoing operation are possible. In the late summer of 2024, the dismantled Location: Ahaus / Germany

Condition: used, total length: 3,900 mm, total width: 1,500 mm, total height: 1,630 mm, number of shelf rows: 1, shelf length: 3,900 mm, shelf height: 240 mm, usable height: 1,600 mm, plate thickness: 3 mm, usable width: 1,340 mm, Mobile stacking rack. Rack weight 220 kg. Racks for storing heavy materials and products. Stackable and transportable by forklift, the rack is extremely versatile. It features a very sturdy construction with a shelf made of 80 mm steel profiles and sheet steel. Approximately 300 racks in varying technical conditions are available for sale. Duslq Uswcdw Sskvust The rack storage area is 5.23 m².

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Duslq Ukvemhhyajust Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2020, total width: 3,900 mm, shelf height: 140 mm, I will sell Jungheinrich MPB beams in great condition dimension -3900mm 140x50mm Dolqowck Tts Ukvueut quantity - 2700 pieces

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, axle spacing: 1,500 mm, total width: 2,000 mm, total height: 3,000 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Arms are continuously adjustable Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Dslq Ukov Smr Sovujut Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Frame: 4260x1000x85 mm Traverses: 2700x130x50 mm Load capacity: 3000 kg/compartment Dsljv D Ir Deq Ukvuout If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves and accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and impact protection, push-through protection, chipboard, gratings, rear wall grilles, depth bars available. Shipping: Please enquire about the shipping costs, stating your postcode and location, as well as the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information and prices, as well as prior sale!

Condition: used, Year of construction: 2010, Functionality: fully functional, total height: 2,250 mm, load capacity per storage section: 60 kg, frame height: 2,250 mm, inner dimension width: 960 mm, outer dimension width: 1,000 mm, inner dimension length: 500 mm, shelf height: 2,250 mm, Equipment: double-sided, Over 1,200 meters of shelving Freely configurable shelving system from Stow Can be used variably Shelf depth: 50cm Shelf width: 96cm Shelf load: 60 kg Djlqjrtp U To Ukvueut Bay load: 360 kg Shelf height: 2.25 mThis shelving system can be easily disassembled and assembled. aisle lengths are freely configurable. There are currently 7 or 8 shelves per bay. We would be happy to plan the new use with you. Scope of delivery: - Over 1,200 meters of shelving - Over 8,000 shelves - Over 1,200 upright frames General conditions: The system can be dismantled by the buyer. by the buyer. Or we can organize the dismantling and dismantling and logistics. The system can be reconfigured together with reconfigured together with us. We can also combine the shelving with new or used shelving units and many many other solutions are conceivable

Condition: excellent (used), Year of construction: 2020, PR9000 pallet racking for 48 Euro pallets This pallet racking is tested with a maximum load of 2,200 kg per beam level in accordance with DIN EN 15512 and therefore has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned parallel to each other Made of solid, high-quality steel for extreme robustness. Withstands high loads of up to 9,000 kg per bay without any problems High-quality workmanship of the entire pallet rack Plenty of storage space thanks to the 3 levels and 3 bays Eye-catching blue and orange color scheme for maximum safety Upright profile: Height: 5500 mm Material: S-355 JR steel Dimensions: 80 W x 70 D x 1.5 Perforation: 50 mm (grid - offset) Surface: Powder-coated blue Profile structure: Omega profile shape Depth: 1100 mm Manufacture: Cold-rolled profile Bay load: 9000 kg Crossbars: Dujlov Hp Tusq Ukvuot The height of the cross beams can be individually adjusted in 50 mm increments Total load capacity per truss level 1800 mm truss: 2000 kg 2700 mm truss: 3000 kg 3600 mm truss: 2200 kg Material Steel S-235 JR (cold-rolled steel) Profile structure: Rectangular profile Fastening: Hook lugs on each side of the crossbeam for hooking in, secured with locking pin Finish: Powder-coated orange Manufacture: Beveled sheet steel Scope of delivery 04 x PR9000 upright 5.5 m high / 110 cm deep Bay load: 9,000 kg 18 x Cross beam PR9000 3600 cm wide incl. locking pins, shelf load: 2200 kg 09 x push-through protection PR9000 3600 mm Year 2020-2022 You can find more items - new and used - in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg Duslq Uemhhx Iekvuot - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), total height: 10,500 mm, shelf length: 2,750 mm, frame height: 10,500 mm, frame width: 1,100 mm, Advertisement: Jungheinrich MPB Pallet Racks – High-Class, Great Condition! We present for sale Jungheinrich MPB pallet racks, which are a rare opportunity on the secondary market. An excellent solution for any warehouse, ensuring efficiency, safety and optimal use of space. Offer details: Number of frames: 500 pieces, each with dimensions of 10500 mm x 1100 mm, load capacity up to 10500 kg. (connected at a height of 9500 mm) Number of beams: 5000 pieces with a length of 2750 mm, each beam with a load capacity of up to 2400 kg per level (3 x 800 kg). Features and advantages of Jungheinrich MPB racks: Condition: Great – the racks are almost like new, ideal for intensive use. High frames: Perfect for large, heavy loads and optimization of warehouse space. Durability and stability: The solid construction ensures safety and long-term use. Flexibility: The racks are easy to configure, which allows them to be adapted to various storage needs. Don't miss out on this unique offer! Jungheinrich MPB racks are an investment that will increase the efficiency and organization of any warehouse. Contact us today to learn more about this attractive offer! price per beam 15 euros Duolq Ukjvzgppsvust Frame 120 euros Take advantage of this opportunity to purchase rarely available, high-quality Jungheinrich MPB pallet racks that are ready for immediate implementation in your warehouse.

Condition: used, Year of construction: 1996, Functionality: fully functional, machine/vehicle number: MING8+10 / 9, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, axle spacing: 1,480 mm, total width: 2,150 mm, total height: 3,000 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever racking, long goods racking, heavy-duty racking Consisting of 10 uprights + 40 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per boom 1000kg Duolq Uov Smrxekvujt Upright load capacity 7500kg Wooden inserts can be supplied upon request. Shelf is available 3 times!!!! Nos. 8 and 10 - 4 with 4 levels - 40 arms No. 9 - 1 with 6 levels - 60 arms + €1,000 surcharge Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your postal code

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Shelving For Plate-Material / Brand: ELBETEC GmbH & Co. KG / Year of construction: 05/2019 - Vertical storage of metal sheets - Careful storage of high-quality sheets - Max. size: 2.500 x 7.000 mm - Max. shelf load (at 6° incline): 18.200 kg There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Dujlq Ukvjv Dncpoust

Condition: excellent (used), PR9000 pallet racking for 42 Euro pallets This pallet racking is tested with a maximum load of 2,200 kg per beam level in accordance with DIN EN 15512 and therefore has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned parallel to each other Made of solid, high-quality steel for extreme robustness. Withstands high loads of up to 9,000 kg per bay without any problems High-quality workmanship of the entire pallet rack Plenty of storage space thanks to the 2 levels and 4 bays Eye-catching blue and orange color scheme for maximum safety Upright profile: Height: 5500 mm Material: S-355 JR steel Dimensions: 80 W x 70 D x 1.5 Perforation: 50 mm (grid - offset) Surface: Powder-coated blue Profile structure: Omega profile shape Depth: 1100 mm Manufacture: Cold-rolled profile Bay load: 9000 kg Crossbars: The height of the cross beams can be individually adjusted in 50 mm increments Total load capacity per truss level 1800 mm traverse: 2000 kg 2700 mm truss: 3000 kg 3600 mm truss: 2200 kg Material Steel S-235 JR (cold-rolled steel) Profile construction: Rectangular profile Fastening: Hook lugs on each side of the crossbeam for hooking in, secured with locking pin Finish: Powder-coated orange Manufacture: Beveled sheet steel Scope of delivery 05 x PR9000 upright 5.5 m high / 110 cm deep Bay load: 9,000 kg 12 x PR9000 spreader beam 3600 cm wide incl. safety pins, shelf load: 2200 kg 04 x cross beam PR9000 1800 cm wide incl. safety pins, shelf load: 2000 kg 06 x Push-through protection PR9000 3600 mm 02 x Push-through protection PR9000 1800 mm Year 2020-2022 You can find more items - new and used - in our store! International shipping costs on request! Dslq Ukjv Hp Eqevuout

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Dslq Uked Tbbdsvueut - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 1996, Functionality: fully functional, machine/vehicle number: MING2/3/4/5/6/7, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, axle spacing: 1,480 mm, total width: 2,150 mm, total height: 3,000 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever rack, long goods rack, heavy-duty rack Consisting of 15 uprights + 60 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Dslov Smm Noq Ukvusut Load capacity per outrigger 1000kg Upright load capacity 7500kg Wooden inserts can be supplied upon request. Six racks are available! 4 with 4 levels - 60 arms 2 with 6 levels - 90 arms + €2,000 surcharge Very good condition, see pictures A forklift is available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: excellent (used), Year of construction: 2020, PR9000 pallet racking for 42 Euro pallets This pallet racking is tested with a maximum load of 2,200 kg per beam level in accordance with DIN EN 15512 and therefore has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned parallel to each other Made of solid, high-quality steel for extreme robustness. Withstands high loads of up to 9,000 kg per bay without any problems High-quality workmanship of the entire pallet rack Plenty of storage space thanks to the 2 levels and 4 bays Eye-catching blue and orange color scheme for maximum safety Upright profile: Height: 5000 mm Material: S-355 JR steel Dimensions: 80 W x 70 D x 1.5 Perforation: 50 mm (grid - offset) Surface: Powder-coated blue Profile structure: Omega profile shape Dslev Hpz Esq Ukvusut Depth: 1100 mm Manufacture: Cold-rolled profile Bay load: 9000 kg Crossbars: The height of the cross beams can be individually adjusted in 50 mm increments Total load capacity per truss level 1800 mm truss: 2000 kg 2700 mm truss: 3000 kg 3600 mm truss: 2200 kg Material Steel S-235 JR (cold-rolled steel) Profile structure: Rectangular profile Fastening: Hook lugs on each side of the crossbeam for hooking in, secured with locking pin Finish: Powder-coated orange Manufacture: Beveled sheet steel Scope of delivery 05 x PR9000 upright 5 m high / 110 cm deep Bay load: 9,000 kg 12 x PR9000 spreader beam 3600 cm wide incl. safety pins, shelf load: 2200 kg 04 x cross beam PR9000 1800 cm wide incl. safety pins, shelf load: 2000 kg 06 x Push-through protection PR9000 3600 mm 02 x Push-through protection PR9000 1800 mm Year 2020-2022 You can find more items - new and used - in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Duelqsguk Dks Ukvuet The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: MING1+11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,050 mm, total length: 21,000 mm, axle spacing: 1,900 mm, total width: 2,150 mm, total height: 3,050 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 7,000 kg, Equipment: double-sided, OHRA K60K - Double-sided cantilever rack, long goods rack, heavy-duty rack Two racks are available!!! 12 uprights - 48 cantilever arms K60K Height 3.05m - Uprights IPE200 - Upright spacing 1.9m center-to-center Total depth approx. 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per boom 1000kg Upright load capacity 7500kg Incl. wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code Dujlqov Smk Io Ukvuot

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Dueljmhh Anoq Ukvuet The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Duelqsguk Dvo Ukvuet Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany Djlq Uomhh Dzekvujut - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.