Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized Bjdpfxsmhhf Sj Akaolg - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) Blodjmhhl Hepfx Akaeg With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation Bjdpfx Akjmhhy Noajlg - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Bljdpfx Ajmidyfokajg - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments Blsdpfsmkixwox Akaeg - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Bljdpfefdkbhjx Akaeg The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth Bedpfemhh Dtex Akajlg 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) Bsdpfxeqt Dmys Akaslg 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Bjdeguk Dvepfx Akaelg - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2017, functionality: fully functional, load capacity per storage section: 1,500 kg, total length: 2,700 mm, total height: 100 mm, total width: 50 mm, Pallet rack / Heavy-duty rack / Beam L=270 from HLF Heiss Only the beams are being sold Used item, in excellent condition, see photos Blodpsy H Ew Iofx Akajg Supplier: HLF Heiss Quantity: 200 pcs Beam length: 270 cm Beam height: 10 cm / Width: 5 cm Maximum load per level: 1,500 kg Color: orange Including locking pins Year of manufacture: 2017 Item is in stock in Wilfersdorf near Mistelbach/Lower Austria. Transport available upon request. Inspection possible at any time by appointment.

Condition: good (used), Technical Data for Shelf Racking: Racking System: Stow Type: Stowshelf Technical Data for Assembly: Blodpoym Sybefx Akaog Number of rack rows: 01 pcs. Rack length: approx. 6,535 mm Number of levels incl. ground level: 05 pcs. Number of bays per rack row: 01 pcs. at 1,265 mm Scope of Delivery Includes: 06x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment pitch: 25 mm Incl. base plates The uprights are pre-assembled 2,500 mm high 600 mm deep 25x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,265 x 600 x 30 mm 100x Shelf supports, used Material finish: Sendzimir galvanized For mounting the shelves 02x Cross braces, new Material finish: Sendzimir galvanized For stabilizing the shelf racking Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. Transport or shipment of this item beyond collection is subject to additional charges, which can be requested from us depending on the delivery location or scope of delivery.

Condition: excellent (used), Nagy PB-80 Extension Bay for Pallet Racking With a standard pallet height of 1.20 m, you can install 6 beam levels in the 10.3 m high extension bay. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per bay, provides a total of 28 pallet spaces per bay. Material & Construction: The galvanized surface offers long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and cross braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimensions are typical for medium to heavy-duty pallet racking uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. Manufacturer: Nagy Type: PB-80 Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Profile: 80 x 60 mm Troop frame: bolted Bodpfx Aksyvr Dgeaelg Upright finish: galvanized Clear span: 3.60 m Crossbeam: 3600 x 120 x 45 mm Crossbeam finish: blue painted (RAL 5015) Number of bays: 1 add-on bay Number of levels: 7 incl. floor storage space Max. pallet weight: 500 kg Permissible bay load: 2000 kg Permissible bay load: 12000 kg Pallet spaces: 28 Scope of delivery 1 x upright approx. 10.30 x 1.10 m galvanized 12 x crossbeams approx. 3.60 m blue incl. locking pins Your Partner for safe warehouse logistics: Assembly, disassembly & racking inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether new installation, conversion, or warehouse closure – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Mezzanine floors for optimal space utilization Racking inspection & testing according to DIN EN 15635 Safety is a legal obligation. We conduct the annual expert inspection (according to DGUV Regulation 108-007): - Inspection for deformations and damage. - Checking of safety pins and load capacity labels. - Creation of a legally compliant inspection report including an inspection sticker. We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de Find more pallet racking – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), 7.4 m Nagy PB-80 Pallet Rack With a standard pallet height of 1.20 m, you can install 6 beam levels in the 10.3 m high rack. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per bay, provides a total of 28 pallet spaces per bay. Material & Construction: The galvanized surface offers long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and cross braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimensions are typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. Manufacturer: Nagy Type: PB-80 Shelf length: approx. 7.40 m Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Profile: 80 x 60 mm Frame: bolted Upright finish: galvanized Clear span: 3.60 m Crossbeam: 3600 x 120 x 45 mm Crossbeam finish: blue painted (RAL 5015) Number of bays: 2 (basic bay + 1 extension bay) Number of levels: 7 incl. floor storage space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible bay load: 12000 kg Pallet spaces: 56 Scope of delivery 3 x uprights approx. 10.30 x 1.10 m galvanized 24 x Crossbeam approx. 3.60 m blue incl. locking pins Your partner for safe warehouse logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether new installation, conversion, or warehouse closure – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Mezzanine floors for optimal space utilization Rack inspection & testing according to DIN EN 15635 Safety is a legal obligation. We conduct the annual expert inspection (according to DGUV Regulation 108-007): - Inspection for deformations and damage. - Checking of locking pins and load capacity labels. - Creation of a legally compliant inspection report including an inspection sticker. Blodpfsyvr Aiex Akaeg We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more pallet racking – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Nagy PB-80 Base Unit for Pallet Racking With a standard pallet height of 1.20 m, you can install 6 beam levels in the 10.3 m high racking unit. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per bay, provides a total of 28 pallet spaces per racking unit. Material & Construction: The galvanized surface offers long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and cross braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimensions are typical for medium to heavy-duty pallet racking uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. Manufacturer: Nagy Type: PB-80 Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Bljdpfx Akeyvrynsaog Profile: 80 x 60 mm Troop frame: bolted Upright finish: galvanized Clear span: 3.60 m Crossbeam: 3600 x 120 x 45 mm Crossbeam finish: blue painted (RAL 5015) Number of bays: 1 basic bay Number of levels: 7 including floor storage space Max. pallet weight: 500 kg Permissible bay load: 2000 kg Permissible bay load: 12000 kg Pallet spaces: 28 Scope of delivery 2 x uprights approx. 10.30 x 1.10 m, galvanized 12 x crossbeams approx. 3.60 m, blue, including locking pins Your partner For safe warehouse logistics: Assembly, disassembly & racking inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether new installation, conversion, or warehouse closure – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Mezzanine floors for optimal space utilization Racking inspection & testing according to DIN EN 15635 Safety is a legal obligation. We conduct the annual expert inspection (according to DGUV Regulation 108-007): - Inspection for deformations and damage. - Checking of safety pins and load capacity labels. - Creation of a legally compliant inspection report including an inspection sticker. We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de Find more pallet racking – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), 25.80 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Rack Length: 25,800 mm Upright Height: approx. 10,300 mm Upright Depth: approx. 1,100 mm Upright Type: PB-80 Profile: 80 x 60 mm Layout: bolted Upright Finish: galvanized Clear Bay Width: 3,600 mm Crossbeam: 3,600 x 120 x 45 mm Crossbeam Finish: blue painted (RAL 5015) Number of Bays: 7 Number of Levels: 7 including floor space Max. Pallet Weight: 500 kg Maximum Bay Load: 2,000 kg Bodoyvrxkopfx Akaelg Maximum Bay Load: 12,000 kg Pallet Positions: 196 Scope of Delivery 8 x Uprights 10,300 x 1,100 mm galvanized 84 x crossbeams 3600 x 120 x 45 mm blue Technical Summary Uprights: 10300 x 1100 mm, 80 x 60 mm profile, galvanized, bolted truss construction. Crossbeams: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface provides long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and transverse braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimension is typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. With standard pallet heights (1.20 m), you can install 6 beam levels in the 10.3 m high racking system. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per level, provides a total of 196 pallet spaces. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), 18.50 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Rack Length: 18,500 mm Upright Height: approx. 10,300 mm Upright Depth: approx. 1,100 mm Upright Type: PB-80 Profile: 80 x 60 mm Layers: bolted Upright Finish: galvanized Clear Bay Width: 3,600 mm Crossbeam: 3,600 x 120 x 45 mm Crossbeam Finish: blue painted (RAL 5015) Number of Bays: 5 Number of Levels: 7 including floor space Max. Pallet Weight: 500 kg Maximum Bay Load: 2,000 kg Maximum Bay Load: 12,000 kg Pallet Positions: 140 Scope of Delivery 6 x Uprights 10,300 x 1,100 mm galvanized 60 x crossbeams 3600 x 120 x 45 mm blue Technical Summary Uprights: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, bolted truss construction. Crossbeams: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface provides long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and transverse braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimension is typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. With standard pallet heights (1.20 m), you can install 6 beam levels in the 10.3 m high racking system. Together with the floor-level storage spaces, this results in 7 storage levels, providing a total of 140 pallet spaces with 4 pallets per bay. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Bedpfx Akeyvrv Aeajlg Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), 11 Meter Nagy PB-80 Pallet Rack Bodpfxsyvruxo Akaslg Manufacturer: Nagy Type: PB-80 Rack Length: 11000 mm Upright Height: approx. 10300 mm Upright Depth: approx. 1100 mm Upright Type: PB-80 Profile: 80 x 60 mm Layout: bolted Upright Finish: galvanized Clear Bay Width: 3600 mm Crossbeam: 3600 x 120 x 45 mm Crossbeam Finish: blue painted (RAL 5015) Number of Bays: 3 Number of Levels: 7 including floor space Max. Pallet Weight: 500 kg Maximum Bay Load: 2000 kg Maximum Bay Load: 12000 kg Pallet Positions: 84 Scope of Delivery 4 x Uprights 10300 x 1100 mm Galvanized 36 x Crossbeams 3600 x 120 x 45 mm, blue Technical Summary Uprights: 10300 x 1100 mm, 80 x 60 mm profile, galvanized, bolted truss construction. Crossbeams: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface provides long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and transverse braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimension is typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. With standard pallet heights (1.20 m), you can install 6 beam levels in the 10.3 m high racking system. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per bay, provides a total of 28 pallet spaces per racking bay. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Nedcon pallet rack approx. 3.1 linear meters, used 🧰 Product Features Blsdpfey D Nybox Akasg • Manufacturer: Nedcon • Color: Blue • Condition: Used, see photos • Frames: 2 units pre-assembled, 500 x 105 cm • Frame width: 10 cm • Beams: 8 units with 290 cm clear span • Safety pins: 16 galvanized safety pins • Anchoring: 8 Hilti concrete anchors • Load capacity: 2,000 kg per level • Bay load: 12,000 kg • Shelves included! 💰 Price: €440 net excl. VAT • Quantity discount: On request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: Possible at any time by appointment Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: good (used), Tool cabinet system consisting of two rows: 1st row: length approx. 10 m – height approx. 2.50 m 2nd row: length approx. 9 m – height approx. 2.50 m or 3 m (2 elements) Bodjyvkatopfx Akaolg Drawer/pull-out width: 65 cm Consisting of a total of 27 cabinet elements

Condition: good (used), Händi P3 consisting of 78 galvanized uprights (480 cm x 105 cm) and 253 grey beams (270 cm x 10 cm). Of these, 11 uprights are slightly damaged. Robering SLP SL consisting of 53 uprights (400 and 450 cm x 110 cm) and 266 orange beams (270 cm x 11 cm). For sale only as a complete package. Bledpfx Aksywd Rnoasg

Condition: used, Technical data for the shelf panel: Shelving system: Meta Type: Clip Included in delivery: 01x Shelf panel, used Panel designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 600 x 40 mm Weight: 3.93 kg|pc. Max. load per shelf panel: 150 kg with evenly distributed load Blsdeyk T E Tjpfx Akasg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs can be queried separately with us depending on the delivery location and the scope of delivery.

Condition: new, Technical data for shelf panel: Shelving system: Meta Type: Clip Scope of delivery: 01x shelf panel, used Panel designation: MS150-III Material colour: Sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Blodpeyk R Rmjfx Akasg Weight: 5.11 kg/unit Maximum load per shelf panel: 150 kg with evenly distributed load Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested from us individually, depending on delivery location and scope.

Condition: excellent (used), load capacity per storage section: 3,200 kg, support length: 3,600 mm, frame height: 7,000 mm, 164 linear meters of pallet racks from the manufacturer Stow, model PAL-Rack, equipped with high-quality hot-dip galvanized heavy-duty mesh panels for flush installation in the beams! Very good condition, inspected annually and reconditioned as necessary. The offer includes: 45 frames 7m x 110cm (height x depth) and 360 beams 360cm, as well as locking pins and 480 galvanized mesh panels for flush placement on the beam levels! Bjdpfeyw N Rmsx Akajlg This provides up to: 900 Euro pallet storage spaces and approx. 164 linear meters of racking. Bay load: 18.7t and shelf load: 3,200kg. Net price plus VAT. The racks have been professionally dismantled and are in stock, so they are immediately available. Delivery by freight forwarding is possible throughout Europe for an additional charge.

Condition: used, total length: 39,900 mm, total height: 3,000 mm, shelf height: 3,000 mm, support length: 2,700 mm, Included in this package: 15 uprights, each 3,000mm x 1,100mm (blue) 56 beams, each 2,700mm (yellow) 112 safety pins This results in a racking row with 14 bays, each with 2 levels plus floor pallet position = total of 126 pallet spaces (1,000kg per pallet) Approx. 800 uprights and 4,500 beams are available for this system. Please contact us for details. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 3,000 mm Length: approx. 39.90 meters Bedsyvr U Eopfx Akajlg Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Compartment load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 126 Accessories such as: Floor fixings Connectors Load notices Impact protectors Guard rails Grating panels Rear mesh panels Support bars Safety barriers ...and much more. Simply ask us for your requirements! "Benefit from over 20 years of industry experience – we provide expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net ex location. Express delivery with our own fleet possible by arrangement. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our unrestricted property until full payment is received (no processing or disposal before settlement). - Warranty: Exclusive sales to businesses (§14 German Civil Code). No liability for material defects with used and grade II goods. Manufacturer warranties apply to new goods.

Condition: used, Included in this package: 1 x upright 11,750 mm x 1,100 mm (galvanized) (The uprights can be cut to any height—just ask us) Available from Berlin or Neuwied For this system, 400 uprights and 2,800 beams are available. Please contact us for more information. Manufacturer: Meta Jungheinrich Type S Condition: used, good condition Height: 11,750 mm Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Bay load: 11,750 kg with a buckling length of 235 cm Accessories such as: - Floor fixings - Connectors - Load warning signs - Impact protection guards - Safety barriers - Wire mesh shelves - Back mesh panels - Depth bars - Boundary railings And much more... Just ask! "Benefit from over 20 years of industry experience – we offer you expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are net ex location. Express delivery using our own fleet possible by individual arrangement. Bedpeyvr Swefx Akaolg - Offer status: All offers are subject to change without notice. Intermediate sale expressly reserved. - Retention of title: Goods remain our unrestricted property until full payment has been received (prohibition of disposal and processing). - Warranty: Exclusive sale to commercial customers (§ 14 German Civil Code). For used and surplus stock, liability for material defects is excluded. For new goods, manufacturer warranties apply.