Condition: used, We would like to sell it in one piece, so partial purchase is not possible. Load capacity: 1200 kg/pallet Condition: as on the photos frame: 5500*1000 mm crossbars: INP 2800*100 mm If you need shelves or accessories in other compositions or designs, please contact us. We offer a wide range of new and used shelves and accessories and will be happy to assist you in your planning. Ppqe7 Other accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grating, rear wall grating, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Dujln Tigeg Tmvhs Tet Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: good (used), Approx. 12 bays of SSI Schäfer shelving, R3000, shelf dimensions 1.30m x 0.60m, height approx. 2.50m - used -: Price ex-site: only €1,000 (net), disassembled, packed, and loaded. Manufacturer: SSI Schäfer Type: R3000 Year of construction: unknown Frame height: approx. 2.48m Shelf load: 150kg Dusln Tev Ual Doig Tjt Bay width / shelf width: 1.30m / 1.28m Bay depth / shelf depth: 60cm / 0.59m 6 shelves per bay Number of frames: approx. 13 Side frames: open Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: like new (used), Gemac Normafix shelving unit Top condition, looks like new Dimensions and design: Manufacturer: Gemac System: Normafix Shelf height: 2500 mm Total shelf length: 82500 mm Shelf rows: 11 Row length: 7500 mm 6 bays per row 5 x bay width: 1300 mm 1 x bay width: 1000 mm per bay: 5 shelf levels 2 rows with shelf dividers Shelf depth: 1200 mm Shelf load per shelf level 200 kg Bay load: 1200 kg Basic features Easy to assemble plug-in system - it could hardly be simpler Dujln Tetqmlmeig Tjt Shelves, panel shelves adjustable in 25 mm increments without tools Panel shelves rest at full depth Shelf depth is the same as shelf depth Powder-coated uprights Shelves, panel shelves galvanized Clear shelf widths: 1310 mm Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), total width: 4,000 mm, total height: 9,000 mm, clearance between the columns: 2,000 mm, shelf length: 900 mm, Equipment: double-sided, Consisting of 3 double-sided columns H 9000 mm 9 shelves with 750 mm arms Shelf capacity 900 kg Shelf capacity 2700 kg Dujln Tigoulufpj Tet Capacity per column front 8100 kg Column spacing 2000 mm

Condition: like new (used), The pewiGRAFLEX™ is used in: Boxes transport, where the boxes are larger than 130 mm; Ground level loading and unloading of goods; Temporary transport from A to B; Small loading-unloading volumes on an annual basis. Dsln Tish Hbbmog Tsut The pewiGRAFLEX™ is a roller conveyor that can be pulled in and out like a harmonica. Because the roller conveyor works like a harmonica, it is also possible to make a turn with the roller conveyor. The flexible roller conveyor is supported by several trolleys with wheels. The height of the supports can be adjusted so that the pewiGRAFLEX™ can be used as a gravity roller conveyor as well as a push back roller conveyor. The wheels are equipped with brakes. Roller conveyor, powered roller conveyor, roller conveyor with roll-off belt, telescopic belt conveyor, telescopic belt conveyor, unloading telescope, loading telescope, roller conveyor telescopic belt conveyor, roller conveyor: fully electric movable telescope

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Dsln Tsh R Taqeig Tjut - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: good (used), ONLY frames without crossbars: 5800*1100*90 mm If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. D7sz8e0 Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Doln Tjgqw A Hsig Tsut Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, specifications and prices as well as prior sale!

Condition: good (used), Approx. 14 bays of SSI Schäfer shelving, R3000, shelf dimensions 1.30m x 0.60m - used -: Price ex-site: only €1,000 (net), disassembled, packed, and loaded. Manufacturer: SSI Schäfer Type: R3000 Year of construction: unknown Frame height: approx. 2m Shelf load: 150kg Bay width / shelf width: 1.28m Dueln Tjv Uaivjig Tot Bay depth / shelf depth: 59cm 4 - 5 shelves per bay Number of frames: approx. 15 Side frames: open Please note that this is the version with shelf holders! – not the standard version with the "cams" for attaching the shelves! Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: Duslemhhy Nsn Tig Tot 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: good (used), Frame: 5800*110 mm Traverses: 2700*120 mm Load capacity: 800 kg/pallet Accessories: locking pin, floor anchor, leveling plate If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves and accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and impact protection, push-through protection, chipboard, gratings, rear wall grilles, depth bars available. Deln Tjhctcveig Tout Shipping: Please enquire about the shipping costs, stating your postcode and location, as well as the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information and prices, as well as prior sale!

Condition: good (used), Approx. 14 bays of SSI Schäfer shelving, R3000, shelf dimensions 1.30m x 0.60m - used -: Price ex-site: only €1,000 (net), disassembled, packed, and loaded. Dslev Uahlon Tig Tout Manufacturer: SSI Schäfer Type: R3000 Year of construction: unknown Frame height: approx. 2m Shelf load: 150kg Bay width / shelf width: 1.28m Bay depth / shelf depth: 59cm 4 - 5 shelves per bay Number of frames: approx. 15 Side frames: open Please note that this is the version with shelf holders! – not the standard version with the "cams" for attaching the shelves! Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Deln Tiemhhf Sjg Tout - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), load capacity: 650 kg, Dexion pull out unit for pallet racking system. Dolnjukq R So Tig Tout Load capacity: 650kg. It can be pulled out up to 70%. There are 2 versions: one can be mounted on a pallet, the other one can be laid on the ground. Size: 860*1270*130mm

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone Dueln Tjd Tqalsig Tet - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), If you no longer need your storage systems or would like to replace them, we can help. Dueln Tigoikqu Te Tjt We will take care of disassembly, loading and organization of transport. In order to make you an offer, we need quantities, dimensions/measurements, pictures and an address. We focus on the following products: - Pallet/ high racks - drive-in/ flow racks - Cantilever racks - Shelf/ magazine racks - storage platforms - Conveyor technology - stacking boxes - pallet cages - corlettes - Cable drum racks - Safety accessories (grating, panel, protectors..) - Stacking racks etc.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Dusln Temhh Dtjig Tet - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, To protect frames against damage, different type new and used version. Do you need shelves or accessories in other compositions or designs, please contact us. Dueljdxqamjn Tig Tjt Shipping: Please contact us giving your postal code and location, as well as the desired article quantity.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Duoln Tigjfdkb Ts Tot Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: good (used), These pallet guides for your pallet racks ensure that pallets, mesh boxes and containers are stored safely and stably at every rack level. Simply integrate the robust pallet supports into your racking system. Doljg Dcp Djn Tig Tsut For frames with 1100 mm depth and 50 cm crossbars thickness. Still available: ideal for frame depth 1910 mm and 1410 mm Type: right- and left-sided and middle position. It is perforated so you can attach it to trusses. If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grating, rear wall grating, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany Dusln Tsfdkb Ujig Tot - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), It is ideal for 1100 mm frame depth. Other size is shown in the pictures. If you need shelves or accessories in other compositions or finishes, please contact us. We offer a comprehensive range of new and used shelves and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Djlohpxufjn Tig Teut Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Duolnjmhh Dhs Tig Tst - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Frame: 4500*1050*80 mm 5500*1050*100 mm Traverses 2300*130 mm 4000 kg/compartment Dusln Tiouq A Ngeg Tjt 1800*80 mm 2000 kg/compartment 1800*140 mm 4800 kg/compartment If you need shelves or accessories in other combinations or designs, please contact us. Shipping: Please enquire about the shipping costs, stating your postcode and location, as well as the desired quantity of items.

Condition: good (used), Frame: 9000*1100 mm Traverses: 2700*110 mm (2400 kg/compartment) Delnjuf Sk Uo Tig Tout If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves and accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and impact protection, push-through protection, chipboard, gratings, rear wall grilles, depth bars available. Shipping: Please enquire about the shipping costs, stating your postcode and location, as well as the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information and prices, as well as prior sale!

Condition: good (used), Frame: 7000*1050 mm Djln Tigeuf Snas Tsut Traverses: 1800*100*50 mm 2400 kg/compartment If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves and accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and impact protection, push-through protection, chipboard, gratings, rear wall grilles, depth bars available. Shipping: Please enquire about the shipping costs, stating your postcode and location, as well as the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information and prices, as well as prior sale!