Forklift

Still RX 20-16

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 630 mm, total length: 1,025 mm, total width: 525 mm, Tested forklift battery for your truck – 48V 5PZS 625Ah – DIN B + 1 year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types available on request) + Capacity: min. 90–100% (C5 capacity report is provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 525 mm Height 630 mm Weight: approx. 890 kg Suitable for the following models and more: Still FM 20 Still R 20-15 Still RX 20-14 Still RX 20-15 Still RX 20-16 Still RX 20-18 Still RX 20-20 Still RX 20-20 P Jungheinrich EFG Heli CPD 18 Mitsubishi FB18KT Njdpfsy Rnmgsx Amnsct Utilev UT20PFH Common battery sizes available, please enquire. Transport possible.

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request Ncedpfx Amoxwy Utenjt terms of payment: 100% prior to delivery

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 361 h, load capacity: 1,600 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Equipment: UVV, lighting, sideshift, Description & Special Features: New tyres, good battery with 70% capacity, side shifter, half-cab (ideal for outdoor use), front windscreen Note: The forklift is in very good condition. The unit is currently located at our site in Bad Krozingen. Transport to your location can be arranged at an additional cost. An invoice with VAT shown separately will be sent to the buyer, and the listed prices are net. Ncodpfxjyzyxpe Amnet By placing a bid, the buyer accepts the terms and conditions of sale.

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO model DAFL50A Year of manufacture 2024 – unused from stock Theoretical area coverage: 2,000 m²/h Nodpfjxr N U Ejx Amnect Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 RPM Squeegee width: 850 mm Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing capacity: 2% Battery voltage: 24 V, 100 AH - 24 V battery charger - 24 V, 100 AH battery - one cleaning brush - two separate tanks - without drive motor, the machine is pushed by hand or moves itself via the brush drive Machine length: 1,200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg New – in original packaging – unused from stock

Condition: ready for operation (used), Year of construction: 2024, operating hours: 8 h, clamping force: 100 kN, screw diameter: 18 mm, total width: 526 mm, total height: 1,692 mm, overall weight: 450 kg, product length (max.): 1,485 mm, Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 14 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details. • Control system: Procan ALPHA 4, 15" multi-touch HMI • Injection pressure: max. 2298 bar (with 14 mm screw) • Theoretical shot volume: 6.1 cm3 • Distance between tie bars: 160 mm (205 mm diagonal) • Max. daylight between platen: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A • min. machine height: 1380mm • max. machine height: 1692 mm • Footprint: 0.78 m2 • Safety guarding: Fully enclosed clamping zone with clear polycarbonate sliding safety gate and electrical interlock • Peripheral interfaces: Pneumatic and cooling water connectors on the non-operator side Ncsdjyw I Azjpfx Amnst • Status indicators: 3-tier LED signal tower (Red/Yellow/Green) Additional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty wooden transport/leveling base

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Ncjdpfey Hmfysx Amnjt Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: like new (used), Year of construction: 2021, 1 machine sold, 3 remaining We are now offering four Vertical Lift Modules from SSI Schäfer, manufactured in 2021. The machines have been serviced by the manufacturer since installation and are therefore in excellent condition. Njdjxwnzhspfx Amnoct Each unit is 2,335 mm wide and 2,712 mm deep, requiring only 6.33 m² of floor space. This makes them ideal for companies that need efficient, organized storage but have limited floor space. The Vertical Lift Modules are designed with two access openings — one at the front and one at the rear — allowing for easier and more flexible loading and picking. This configuration enables various processes, such as picking and loading, to take place simultaneously without interference. If required, one of the access openings can be closed off. Each machine is equipped with the optional LogiPointer, a light pointer that precisely indicates where each item should be retrieved. This reduces picking errors and increases operational efficiency. Please note: To use the LogiPointer, the unit must be connected to an ERP or a warehouse management system (WMS). Machine Specifications: Manufacturer: SSI Schäfer Year of Manufacture: 2021 Model: Logimat 1825-625-7950/220 Height: 7,950 mm Width (Machine / Tray): 2,335 mm / 1,825 mm Depth (Machine / Tray): 2,712 mm / 625 mm Number of Trays: Approx. 31 trays per Vertical Lift Module Maximum Tray Load: 220 kg Power Supply: 3/N/PE 400V, 25A

Condition: used, functionality: fully functional, machine/vehicle number: 13182, Year of construction: 2021, operating hours: 1,401 h, load capacity: 1,300 kg, lifting height: 3,010 mm, free lift: 920 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: 13182 Mast type: Duplex Condition: Refurbished without warranty Technical condition: good Description: Toyota 7FBEST13 No.: R0579 Year of manufacture: 2021 Fast and uncomplicated transport possible by arrangement! The advertisement is merely for the identification of the device! An exact description of the condition as well as possible equipment will be provided individually upon request! Errors and prior sale excepted, sale only to commercial customers.. every sale of used goods is made with exclusion of warranty and/or guarantee. If you have not found your forklift, please contact us. We have a wide selection of other machines on site. The machine is visually in good and technically in good condition. Ncjdpfewp Uxasx Amnet Sideshift, 3rd valve,

Condition: reconditioned (used), Year of construction: 2014, operating hours: 327 h, functionality: fully functional, working width: 510 mm, area performance: 2,200 m²/h, overall weight: 204 kg, warranty duration: 6 months, water tank capacity: 40 l, KARCHER B 40 W D51 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2014 with 327 hours of operation The D51 cleaning head (510mm) is equipped with a new medium-hard disc brush, allowing for operation on any surface. New polyurethane squeegee rubbers are resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and a new suction hose. NEW suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Battery power (V): 24 Working width (mm): 510 Ncjdpfx Amjy Eqc Rsnjt Suction width (mm): 850 Theoretical capacity (m²/h): 2200 Clean/dirty water tank (l): 40/40 Brush speed (rpm): 180 Machine weight, ready to use (kg): 204 Dimensions (L x W x H) (mm): 1249 x 620 x 1145 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 500W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose Squeegee blade with new rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE HIGHEST FEATURES FEATURES: The 40-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A tight turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise solution extraction from the surface being cleaned. The large working width (510 mm) ensures high surface coverage. The control panel is easy to read and use.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 2 units SSI Schäfer LogiMat-2425 from 2019 for sale. Very sparsely used and in as good as new condition. SSI Schaefer is one of the world's largest companies in warehouse automation and their Vertical Lift Module "LogiMat" has gained a lot of ground in the world in recent years. These 2 lifts come with a good height of 9 950 mm - if you have enough ceiling height in your warehouse or factory, it means the possibility of really compact storage on a small floor surface. If necessary, the machines can be lowered to the desired height. The trays have a width of 2 425 mm and can handle a load of 300 kg, the combination means that the vertical storage lifts also work for businesses with heavy goods. The VLM's come with the option "LogiTilt", a function where the shelf can tilt in the opening of the machine and thus improve the ergonomics for the picker. Nedpfxoy D St Re Amnjct In addition to the tilt function, the lifts also come with a laser pointer. If the machines are connected to your ERP or WMS, the laser pointer can indicate which picking location goods should be picked from. The machines can be purchased separately or in pairs. Available with a delivery time of 4-6 weeks. Shipping and installation is additional. These vertical lifts are configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. The Vertical Lift Modules are each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. The items can be purchased separately or in packages of 2 or 3. Available from the end of October 2023. Shipping and installation not included. Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Depth vertical lift module / tray: 2 712 mm / 625 mm Number of trays: 34 trays per unit Maximum weight per tray: 200 kg Electronics: 25 A, 400 V