SECOND-HAND 4+1 SPINDLES MOULDER

Steton FAST-5S

Condition: used, Year of construction: 1993, Name: Industrial decanter Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year built: 1993 Max. bowl speed: 3250 1 / rpm Material: Edelstahl Stainless Steel Rcsdewid Nhjpfx Ac Tef Driving force: 18,5 / 21 kW Inner diameter drum: 353 / 198 Interior drum length: 1200 mm Permissible sediment density: 1,2 kg / dm3 Dimensions: Length 3000 x width 1000 x height 1150 mm Empty weight: 2500 kg Technical doc.: Yes Message: Eddy current brake Accessories: A control cabinet Condition: Second hand Price: On demand

Condition: excellent (used), Year of construction: 2008, MESPACK type H-180-FE powdered sugar bagging machine Year 2008 Filling in 2 stages 1 filler fills half, 2 filler fills other half Capacity: 50 bags per minute. Cartoning machine OTOR SYSTEMS type FCR 214 Capacity: 5 cartons of 10 bags per minute Year 2011 Rcodpfjtn Rarjx Ac Tef

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Rcodpfx Ajmidyioc Tof Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles Rcsdpfx Aodxz Tpsc Tef • Faster and more precise working compared to squeezy glue bottles

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Rcedpfx Asi E Trpjc Tjf

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm Rcedpowwtw Defx Ac Tef 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm Rjdpeh Nvyzefx Ac Tjcf -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw Rcjdohlp D Njpfx Ac Tjf The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price Rsdpfju Agh Sox Ac Tocf To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, SECOND-HAND RECONDITIONED 5 AXIS ROBOT CMA MOD. ROBY 5EX-R Rcjdpet U Ngasfx Ac Tsf - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2024