Collar rack

Stahl 2,1 m Regal Hoehe 2,17 m

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device Bjdpfx Ajfu Itbeafedc motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Bjdpfjh Ek Daex Aafodc Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 1990, condition: excellent (used), used T-slot clamping angle Technical data: Dimensions height 1120 mm width 320 mm Bjdpsgwxmxsfx Aafodc Groove width 20 mm with - 7 horizontal T-slots used, in good condition

Condition: ready for operation (used), length 6000 mm width 2500 mm total power requirement / kW Without PC and software Dimensions (L×W*H): 6000 × 2500 x 350 mm, without vacuum plate Manufactured according to DIN 876 / class II Bodpfeud Il Ssx Aafsdc

Condition: new, Year of construction: 2026, Metalclean - P100 spray cleaning system in stainless steel 1-tank spray cleaning system with rotating basket. With oil separator, pneumatic with diaphragm pump - Basket diameter: 970 mm - Usable internal height: 540 mm - Basket load: 200 kg - Filling volume: 210 L Incl. accessories: - Direct drive Bdjdpfx Asir Aqdoafjc - Level control - Lid locking mechanism - Swarf/particle filter with bath cover plate Spray pressure = 5 bar Operating voltage = 3 x 400 V/N/PE 50 Hz Vapor extraction

Condition: like new (used), Year of construction: 2023, Technical Data: Bedpfsy Hmfysx Aafodc Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Year of construction: 1984, condition: excellent (used), Technical data Manufacturer: Stiefelmayer Type: C-MAN S/N: 432309901 Year of manufacture: 1990 Column cross section 160/160 cross arm 80/80 Bdjdpfx Aaehpzbcofjc Measuring range X = 4400 mm Y = 1600 mm Z = 1800 mm The machine can be modernized with new accessories according to the customer's requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is intended exclusively for professional customers. (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM universal head Bdodpfjvm Akgjx Aafjc portable radial

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Bdedjwc Ryajpfx Aafsc Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Cooling system Internal cooling through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Spindle runtime: 11,428 Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling - Continuously rotating rotary table - No chip conveyor

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm Bjdpfx Aov S Ay Seafedc arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *