Welding turn table

Stähler SD 2000

Condition: like new (used), Year of construction: 2022, 600 Kg load capacity welding rotary table adjustable in height with through hole 100 - 200mm plate diameter 700mm height horizontal min. 0,65m, max. 1,25m height tilted min. 0,45m, max. 0,95m speed from 0,01 - 1,1 rpm Tilt up to 135 hand and foot remote control with speed indicator very robust Ncodpfx Aed Anz Rsaaor

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame Ncodpfx Asrmkfnoaasr - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,850 h, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, total height: 2,985 mm, overall weight: 5,000 kg, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine. Additional equipment • Electronic Handwheel • Chip conveyor • Oil skimmer • Emulsion flushing gun • 2 x Hydraulic vice Njdpfxjx D E H Io Aaaocr • 25 x Clamping chuck BT40 Machine Benefits Technical Machine Benefits • Table dimensions: 1000 x 450 mm • Distance spindle nose - table surface: 150 - 775 mm • Max. Tool diameter with free neighboring places: 125 mm • Max. Tool diameter with occupied neighboring places: 80 mm Extra Information Machine still under power Dimensions Machine Depth 2158 mm

Year of construction: 1983, condition: good (used), Machine number: 316204/22 Type / Model: FSS 315/E Travel x-y-z: 850 - 280 - 355 mm table: 1.200 x 370 mm clamping surface: 1.060 x 260 mm Speed range: 28 to 1,400 rpm spindle mount: SK 50 quill stroke: 80 mm Feed rates x and y axis 16 to 800 mm/min feed z-axis: 5 to 250 mm/min Connection: 8 kW Accessories/equipment: Swivel head; condition: good Weight: 4 t Nedpjfli Afjfx Aaaocr Dimensions: 2.000 x 2.000 x 2.400 mm

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding turntable KT 300 Ncjdpsc Ug Tlsfx Aaajr Horizontal load 300 KG, tilted 150 KG Power consumption 220V, 50 Hz Table diameter 450mm Height 500mm Infinitely variable tilt range via crank gear motor 0 - 90° Speed 0.3 to 2.5 rpm Incl. foot remote control Surcharge: Quick-release jaw chuck Diameter 300mm, 450.-€

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm Ncsdpfxjwf Rg So Aaaor ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Year of construction: 1995, condition: good (used), For sale is a presetter of the brand Mahr and the type V 420 The device is fully functional and in good condition Technical data: Year of manufacture : 1995 Control : Zoller DA6052B measuring range X-axis: 150 (300) mm measuring range Z-axis: 450 mm magnification: 20x fine adjustment: +/- 5mm projection area: 80mm Dimension control: Heidenhain LS 403 air pressure: 6 bar weight: ca 150 kg Space requirement: 2m x 1,5m x 2m loading & or shipping possible for extra charge Prices plus value added tax Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale Njdpfemf T Aasx Aaaecr PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Year of construction: 2020, condition: like new (used), Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz Table diameter 500mm Diameter hollow shaft 140mm table height 600mm, tilted to middle 450mm length 650mm, width 650mm Tilt range infinitely variable via crank gear motor 0 - 90 speed 0,3 - 2,5 rpm Incl. foot remote control Njdpod A Etwofx Aaaecr Surcharge: Quick release - jaw chuck Diameter 400mm, 550.-€

Condition: excellent (used), Year of construction: 2004, Brand : Luna Type : 8835 18/05 Year of construction: 2004 Capacity : 1890x0.5 (250 N/mm2) Mains voltage : 3x400V / 3x230V Roll diameter : Ø 35 mm Motors : 0.75 kW max. working speed : 7.1 m/min Machine weight : 900 kg Art.no. : 6812 Ncedpsh Ngd Rjfx Aaaor Complete, well-functioning CNC plate roller for rolling thin material up to 0.5 mm plate (250 N/mm2). Especially suitable for rolling aluminum sheet. Previously used for rolling lampshades. Machine description Luna: “The 8835 is a roll bending machine for the production of small radius louvres and reflectors to meet the demands of the latest small diameter light tubes. The machine is designed with three independant bottom rolls to reduce prodcution time to a minimum. All rolls run in adjustable support bearings to permit easy roll adjustment for materials of different hardness and thickness. The top roll crowning is carried out by means of a crossbeam, which tilts to make room for the bent part. All rolls are hardened and chromium-plated with polished surfaces to avoid marking. The control system allows the programming of constant radius parts as well as parabolic shapes. 100 programs can be stored. ” Full documentation available: - Operating manual (in English) - Electrical Schematics

Condition: used, Year of construction: 2000, Lg.no. 24489 Technical data: - Load capacity ( vertical ) 100 kg - Flat plate diameter 400 mm - Passage opening 60 mm - Face plate manually steplessly tiltable 0 - 135 ° - Rotation infinitely variable motorized 0.05 - 5 m/min - E. foot switch for start - stop - Table height in horizontal position without rollers approx. 750 mm - 3 jaw chucks Ncjdpju Uqbksfx Aaasr - Drive 220 V - Space requirement approx. W 450 x H 850 x D 650 mm - Weight approx. 60 kg