Dust collectors

Spänex SMU 25

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, filter area: 10 m², volume flow: 1,450 m³/h, negative pressure: 3,000 Pa, nominal flow rate: 1,400 m³/h, overall weight: 400 kg, total width: 750 mm, total length: 1,520 mm, total height: 1,975 mm, extraction nozzle diameter: 140 mm, power: 3 kW (4.08 HP), Further technical data: Frequency converter for continuous adjustment of the extraction air volume to the actual demand by variable speed adjustment Kjdovazi Iepfx Aa Esfa Compressed air purge cleaning, automatic with runtime addition Residual dust content:

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ Kedpot Hagnefx Aa Eofa * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Year of construction: 2024, condition: new, RSS 600 series Mono Rotor Shredder new model 2023 full options model. 18.5kw 40x40 knife block. Kfodoirt H Aopfx Aa Eea rotor length approx. 600 mm infeed hopper approx. 600 x 900 mm Screen size in consultation motor cover and pusherbox guide strips as well PLC controlled with Reverse action as well an manual reverse. Conveyor and/or discharge screw is optional available. CE certificate/ Dutch suitable for various types of plastic/wood/or other material delivery in consultation Adjustments to e.g. motors, sieve, frame possible. Infeed or discharge conveyors, storage, metal separation possible. Larger or smaller models also available. Intrested, reactions with your name, company name and telephone number. We will call you.

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Kjdpfevctlgox Aa Esfa Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Year of construction: 2011, condition: excellent (used), Operating hours 1,523 hrs. - Edge thickness max. 8mm - PLC control (program controlled) - glue height max. 60 mm - Joining unit in synchronous and counter-rotation (with diamond tools) - Gluing station cartridge - Pneumatic pressure unit - cross-cutting station pneumatic swiveling to 10 - Milling station motor adjustable (MOT4) DIA- tool - Keying station vertical pneumatic adjustable - swiveling pneumatic - Corner copying unit (diamond tool) - Radius scraper with motorized adjustment (MOT 2) Kfedoma Sg Repfx Aa Esa - Surface scraper Dimensions: 454 cm length 120 cm width 161 cm height (upper edge of control panel)

Condition: new, Year of construction: 2025, Versatile hamburger, hot dog bun, roll-bread, panini and etc slicer-cutter. Available cut options: full cut, partial cut, two sided cut (butterfly). Suitable for products with dimensions: width up to 150mm, height up to 80mm. Adjustable cut height and width, adjustable conveyor and cutting speed. Capacity approx 100pcs/min. With castor wheels, fully stainless steel, CE, made in Europe Kodpsinwg Iofx Aa Ejfa Condition brand new, with warranty, ready on stock for shippment.

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: manual Kfsdpfx Aaetnggye Eja Saw blade angle display: Scala Cutting height display: - Width stop display: Scala Cutting ruler display: Scale Saw blade diameter: 500mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm weight: 900kg

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Ksdpfx Ajvqbh Esa Eofa

Year of construction: 2014, condition: good (used), For sale is a Nilfisk compact safety industrial vacuum cleaner type CTS40 M Z22 400 C 4 kW 9 A 50 Hz 114 kg Ex-proof The vacuum cleaner is in good condition and ready for immediate use Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Kfodpfxehu Sf Hs Aa Eja Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm Kodpfxjh U Dame Aa Eofa spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.