Eccentric Press - Single Column

SMERAL LEN 63 C

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Hfjdpfx Aasvt Nvpjyjr Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: good (used), machine/vehicle number: 2852, Year of construction: 2006, load capacity: 8,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 1,600 mm, total length: 4,120 mm, total width: 2,220 mm, additional equipment features: Fire extinguisher , Dual tread, Weight system, Equipment: lighting, TCM FD80 from Uniktruck Hedpfxerk Rd No Aaysfr

Condition: good (used), Year of construction: 1984, functionality: fully functional, pressing force: 63 t, Band saw LEN63C Hsdpfx Aju Nkfuoaysfr

Condition: good (used), Year of construction: 1989, functionality: fully functional, total height: 25,500 mm, table width: 800 mm, table length: 630 mm, stroke adjustment: 105 mm, total width: 14,250 mm, total length: 17,900 mm, overall weight: 5,850 kg, pressing force: 63 t, height adjustment type: mechanical, power: 7.5 kW (10.20 HP), Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm Hfsdpfxotzxdze Aayjr - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts Heded Nl E Uopfx Aaysfr exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Condition: used, Year of construction: 1986, Technical details: pressure: 63 t no. of strokes: 65 / 130 Hub/min throat: 315 mm ram adjustment: 60 mm ram stroke: 10 - 105 mm distance between table / ram: 335 mm distance between columns: 355 mm Hedpju N Dafjfx Aaysfr clamping plate: 800 x 610 x 85 mm ram surface area: 450 x 280 mm compressed air: 9 bar control voltage: 24V / 50Hz V total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimension machine xH: 1,42 x 1,8 x 2,6 m Control via foot pedal *

Condition: used, Year of construction: 2010, turning diameter max. 410 mm turning length 1.235 mm control IT / Turn Plus Heidenhain greates pass round over bed 700 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 35 / 45 kW max. Torque 770 Nm spindle head 220 h5 spindle diameter in front bearing 160 mm max. usable bar diameter 95 / 104 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 4.000 min -1 power capacity driven tool-stations 12 kW max. Torque 36 Nm tool taper VDI 40 DIN 69880 turret change time 30°: 0,4 sec. Y - Axis 120 (+/- 60) mm x-axis 300 mm z-axis 1.300 mm y-axis +/- 60 mm tailstock 1.200 mm taper of center MK 5 clamping capacity 1.400 daN rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min total power requirement 60 kVA weight of the machine ca. 7,7 t dimensions of the machine ca. 6,0 x 3,5 x 2,5 m CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Tool drive - Direct measuring system - Bar machining package Hfodpfx Aaovzhiwoysr - Connection for bar feed / bar loading magazine

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] Hedpjuhcbcjfx Aayofr - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] EQUIPMENT - CNC FANUC 16W control - cooling unit - cooling tank with pump - automatic threading

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Hfjdpfx Aswfynfoayor Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Hfjdpfx Aasxdt Umjyjr Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.