Welding set

Sitec Sistemi Tecnologici TO800CAB1T

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, type of input current: three-phase, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Kedpfoxtau Eox Aldedt Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 0304/5599, functionality: fully functional, controller manufacturer: Delem, controller model: DA-65, working width: 3,000 mm, bending force (max.): 105 t, control type: CNC control, degree of automation: automatic, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, european tool clamping system, Crowning: Reflex - ACSG1 Priključna moč: 11 kW Tools: Possible with agreement. NEW UPPER TOOL HOLDERS. Kodpfxsxv Eafj Aldjdt Last service: 05/2025.

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Kdodpfx Aleki Tlqjdet Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 3,100 mm, Equipment: documentation/manual, STANDARD EQUIPMENT Special beam and column design, implemented as a complex structure, automatically ensures the bending process without requiring separate control or manual adjustment. Ksdpfx Alszcg Ixedjdt The two upper press cylinders are individually controlled (on the Y1 and Y2 axes), allowing for angle correction in seconds. AKAS safety light curtain (motorized) Electric foot pedal with 2 pedals and panic stop function Electronic selection for “Teach-In” programming of each axis Upper tool clamp, two-sided, with mechanical quick tool clamping Inverter – reduced energy consumption High-speed function, 100 tons up to 3 m Operating hour counter, first oil fill AMNC 3i graphic control with 18.5" touchscreen: Y1, Y2 – left and right press cylinders X1, X2 – front-to-back movement of rear backgauges Z1, Z2 – lateral manual movement of rear backgauges (4-axis) R – simultaneous height adjustment of rear backgauges Operation from memory or directly from USB Tool library (only for AMADA tools) Programming: 2D graphic, numerical angle, and Teach-In programming; 3D graphic with external software Modular tool system (835 mm, 415 mm, and segmented version – optional) DigiPro angle measuring system, infrared Technical data: Press force (kN) – 1,000 Table length (mm) – 3,110 Distance between columns (mm) – 2,705 C-frame opening (mm) – 420 Stroke (Standard) (mm) – 200 Stroke (Long Stroke option) (mm) – 350 Installation height (Standard) (mm) – 470 Installation height (Long Stroke option) (mm) – 620 Table width (mm) – 180 Table height (mm) – 960 Speed (approach) max. (mm/s) – 200 Speed (working) (mm/s) – 15 Speed (return) (mm/s) – 150 Number of controlled axes – 7 Rear backgauge travel range (X-axis) (mm) – 700 Rear backgauge travel range (X-axis, backgauge tilted) (mm) – 1,020 Rear backgauge travel range (R-axis) (mm) – 250 Travel speed (X-axis) (mm/s) – 500 Travel speed (R-axis) (mm/s) – 160 Travel speed (Z-axis) (mm/s) – 1,000 Electrical requirement (kW) – 16.5 Oil tank (liters) – 160 Control – AMNC 3i graphic control with 18.5" touchscreen DigiPro angle measuring system, cable-free – standard accessory Communication options with the machine – USB, UTP network External programmability – with BendCAM software

Condition: good (used), 50-position filler with crown cap closure. Kedpfx Ajvq Suioldjdt Used in a winery for filling wine into 1L glass bottles

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR Kdjdpfx Asyuqacjldst TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, functionality: fully functional, Wohlenberg 44 FS 50 automatic three-knife trimmer. Complete with accessories. Kdodpfx Ajxdm Dbjldst

Condition: like new (used), Year of construction: 2018, operating hours: 5,498 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 3,500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, table length: 2,500 mm, table width: 3,500 mm, spindle speed (max.): 12,000 rpm, table height: 300 mm, table load: 130,000 kg, workpiece weight (max.): 130,000 kg, spindle nose: HSK A100, MOVING GANTRY MILLING MACHINE FPT MOD. DINOX 350 IAT 5 axes Numerical control: Heidenhain TNC 640 X axis: 2,500 mm Z axis (Vertical): 1,300 mm Y axis: 3,500 mm Rapid traverse: 40,000 mm/min Universal head with continuous positioning HSK A100 electrospindle interface Maximum speed: 12,000 rpm A axis: + / - 185° C axis: + / - 270° Table: 3,500 x 2,500 mm, height 300 mm Load capacity: 15t/m^2 Tool changer: 64 positions Total power: 85.13 kW Weight: 51,370 kg Complete with: - Laser probe and software for tool integrity check and tool length and radius measurement Kdjdjwzv Tcepfx Aldot - Workpiece probing and alignment sensor - External/internal tool coolant with 1,500 l tank, p=40 bar - Workpiece washing gun with tool coolant, dedicated pump - Internal tool cooling with compressed air, High Speed - Chip conveyor USED MACHINE YEAR 2018

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. The machine can be inspected on site. Condition as new. The machine has never been in serial production. Kdedpehd N Dajfx Aldjt Sale from place.

Condition: good (used), Year of construction: 2011, Used Trumpf 5130, 3-meter CNC press brake Type: 5130 Kedpfx Ajzd S Apoldedt Capacity: 3100 x 130 tons Year of manufacture: 2011 Wila hydraulic upper and lower clamping system Bending aid X, R, Z1 and Z2 CNC-controlled back gauge