Electric motor

silniki EMK 120 sztuk 0,75 KW- 55 KW

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day Hjdpfx Adevhctwjlon - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Hjdpfexg Ekfsx Adlsn

Condition: like new (used), Year of construction: 2020, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: XZHGB50-12050, Equipment: documentation/manual, PLEASE ONLY SERIOUS ENQUIRIES REGARDING VIEWINGS OF THE PRODUCTION LINE! WE DO NOT INTEND TO DISMANTLE THE LINE IN JANUARY; THE ADVERT COULD NOT BE PROGRESSED OTHERWISE. Hodpfx Adeya Eh Ejlen I am offering for sale a completely unique production line in Hungary. 1. The line manufactures trays suitable for storing 10 eggs, in either continuous or batch operation. From raw material preparation to final delivery, we are offering a complete system for sale. 2. The egg tray production line is located in Bátonyterenye, where a fully serviced industrial site provides all the infrastructure necessary for production. 3. The total output of the line is sold on the domestic market. The complete egg tray production line consists of several units: - Material preparation system, which processes waste paper into mouldable raw material. - HGHY egg tray forming unit, which finalises the trays by drying and hot-air pressing after moulding. - Palletising system, which makes the finished trays ready for transportation. - Auxiliary systems for air, vacuum, power, gas, and water supply.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: SN 336, cutting force: 420 t, power: 80.9 kW (109.99 HP), total width: 2,800 mm, total length: 15,000 mm, total height: 3,400 mm, overall weight: 54,000 kg, cutting length (max.): 2,000 mm, year of last overhaul: 2016, Used hydraulic scrap shear LEFORT 420 t / semi-mobile Model C 420TD Incl. HF radio remote control Can be installed without foundation – machine is mounted on a 300 mm steel frame, incl. 4 lateral supports for self-loading and unloading. Shear force: 4200 kN Shear width: 800 mm (blade 820 mm) Hsdpfey Hq Eqjx Adlen Shear height: 520 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, machine/vehicle number: REFLEX 36290, This is a fully functional machine that will be ready for delivery in December 2025. It includes a loading table - it has dimensions of 6000 * 2500 mm. The length of the chamber is 6000 mm. The expected status as of December 31, 2025 will be approximately 8,800 hours. The machine is located at: U Panelárny 461, Předměřice nad Labem. Hjdpfx Adjwhnbfjlsn

Condition: good (used), High performance pumps, pump block for storage and retrieval of fuel oil, diesel, lubricants, oils, biodiesel, waste oil, frsich oil, ect.... Manufacturer: Pumps: Alfons Haar Hamburg Electric motors: Flender Capacity: 380 l/ min and 700 l/ min The plant consists of 2 units with 3 pumps and electric motors each. Control cabinets are also included in the scope of delivery. Hodpfoiw Ehbox Adlon Note: the electric motors are not sold separately ! Only serious and serious inquiries are answered under indication of: Name, e-mail address and telephone number answered.

Condition: ready for operation (used), * Type: B3 * Model: NEW electromotors * ABB: 125 kW -- Rpm 1480 -- Axis 80 mm. * HEEMAF: 70 kW -- Rpm 735 -- Axis 90 mm. * HEEMAF: 80 kW -- Rpm 750 -- Axis 90 mm. Hjdeywmbvjpfx Adlon * ROTOR: 1.8/3.6 kW -- Rpm 720/1430 -- Axis 38 mm. * ROTOR: 5.5 kW -- Rpm 2950 -- Axis 38 mm. * ROTOR: 5.5 kW -- Rpm 1450 -- Axis 38 mm. * ROTOR: 7.5 kW -- Rpm 1455 -- Axis 38 mm. * ROTOR: 30 kW -- Rpm 975 -- Axis 60 mm. * ROTOR: 30 kW -- Rpm 2950 -- Axis 48 mm. * ROTOR: 37 kW -- Rpm 975 -- Axis 65 mm. * ROTOR: 37 kW -- Rpm 1475 -- Axis 60 mm. * ROTOR: 45 kW -- Rpm 1430 -- Axis 60 mm. * SIEMENS: 110 kW – Rpm 728 -- Axis 90 mm.

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station Hodexmiirepfx Adlsn 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: new, Year of construction: 2013, functionality: unexamined, I am offering for sale a lot of 7 industrial multistage pumps from former professional stock. The equipment is new, never installed, stored since 2013. Lot composition: 2 × Wilo MVI 5206-3/16/E/3 2 × Wilo MVI 3204-3/16/E/50 1 × Wilo MV116 2 × Franklin / E-Tech VS30/09 Hjdpfx Adjy Skuvelon General characteristics: Vertical multistage pumps Applications: clean water, pressure boosting, industry, HVAC Renowned brands: Wilo / Franklin Electric Robust construction (stainless steel / steel) Nameplates present Stored in a dry environment Never assembled / never commissioned Applications Industrial installations Pumping stations Water treatment HVAC / boosting Maintenance and spare parts