Used Kunzmann Ba 600 for sale (81)

Condition: used, Year of construction: 2000, Kunzmann machining center BA 600 complete with Heidenhain control. Very good condition, however, there are occasional control issues. Dwedpfx Acexn Av Ujyed

Condition: excellent (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC 530, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! Dwsdpo Afwxzsfx Acyjd TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Spindle speed: max. 8,000 rpm MACHINE DETAILS Control system: Heidenhain TNC 530 Operating hours: Spindle hours: 5,233.8 h Machine operating hours: 13,455 h Control system operating hours: 17,705 h

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table load: 500 kg, rotational speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 600 mm Dwedpoyv A E Iofx Acyed Spindle speed: 9,000 rpm Spindle taper: ISO 40 Spindle drive: 7.5 kW Table size: 750 mm x 450 mm Spindle/table distance: 690 mm Table load: 500 kg MACHINE DETAILS Control: Heidenhain type 410 M mm Machine weight: approx. 3.2 t EQUIPMENT Electric handwheel

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC machining center Kunzmann WF 600 CNC Control system: Heidenhain TNC 640 Year of manufacture: 2015 Internal machine number: 76 Travel ranges: X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Dsdpfx Acoz A Tz Ieyswd Spindle taper: SK 40 DIN69871 Spindle speed: 1 - 5,000 rpm

Condition: excellent (used), Year of construction: 2014, Kunzmann WF 600 M Tool Milling Machine Kunzmann WF 600 M with Heidenhain TNC 124 Control Year of manufacture 2014 Excellent CONDITION CE-compliant!! Technical Data: Year of manufacture: 2014 Fixed angle table Spindle speed: continuously variable up to 4000 rpm Feeds: stepless in 3 axes from 0 to 2000 mm/min Travel X/Y/Z: 600/400/400 mm Rapid traverse x/y/z: 5 / 5 / 4 m/min Table size: 650 x 350 mm Table load: 250 kg Vertical quill travel: 60 mm Vertical and horizontal spindle, SK40 Hydraulic clamping system Weight approx. 1700 kg Space requirement approx.: 2.3 x 2 x 2 m Drive power: 12 KVA Accessories and Equipment: Heidenhain TNC 124 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control and programming examples Handwheels, coolant unit, tool holders, vise About the Machine: Dwodpfx Acey Sihzsyjd Offered here is a Kunzmann WF 600 M tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is straightforward, simply by swinging away the vertical head. The guides are reliably lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested at our facility. Take the opportunity to inspect and test the Kunzmann under power at our premises. You can find more milling machines from renowned manufacturers on our website.

Condition: used, Year of construction: 2013, functionality: fully functional, KUNZMANN WF 600M Milling Machine (2013) Manufacturer: KUNZMANN Type: WF 600M Milling Machine Year of manufacture: 2013 Condition: Used X/Y/Z: 600/400/400 mm Dwedpfxjzy Srce Acyod Spindle taper: SK 40 Milling table clamping area: 800 x 425 mm Clamping slots: 6 slots, width 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate: 0 – 2000 mm/min Rapid traverse X and Y: 5000 mm/min Rapid traverse Z: 4000 mm/min Hydraulic clamping system Main drive motor: 5.5 kW Weight: approx. 2000 kg - Dimensions: approx. 2 x 2 x 2 m

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Technical Data: - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm - Infinitely variable feed: 0–2000 mm/min - Rapid traverse (X and Y axis): 5000 mm/min - Z axis: 4000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor Dwsdpewz Eu Nefx Acyod - Power rating at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Dwodpfx Acoztxndsyod Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: excellent (used), Year of construction: 2004, CNC MACHINING CENTER Kunzmann BA 1200 Year of manufacture 2004 Heidenhain TNC 530 Dodpfx Aswm Dkyscyjwd Technical specifications: X-1200 Y-700 Z-750 Spindle max. 8000 rpm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,649 h, functionality: fully functional, machine/vehicle number: 101161, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 920 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 14,000 rpm, A new spindle was installed one year ago! TECHNICAL DETAILS Travel in X-axis: 1,020 mm Travel in Y-axis: 620 mm Travel in Z-axis: 920 mm Swivel range of B-axis: +30° to -120° Spindle speed range: 1–14,000 rpm Tool holder: SK 40 Tool magazine capacity: 40 Clamping surface of rotary table: 1,200 × 610 mm Diameter of rotary table: 500 mm MACHINE DETAILS CNC control: Heidenhain iTNC 530 Operating voltage: 400 V Frequency: 50 Hz Dwsdpfx Asz Hwutecyjd Control voltage: 24 V Power: 75 kVA Rated current: 100 A Main fuse: 120 A Machine weight: 8,740 kg Operating hours (according to counter) Spindle running time: 10,649 h Program running time: 11,159 h Machine operating hours: 24,317 h Control operating hours: 26,901 h EQUIPMENT Fixed rotary table NC rotary table WALTER B-axis swivel head with torque drive Vertical tool changer 3D measuring probe Heidenhain Electronic handwheel Fixed full protective enclosure with interior lighting Internal cooling system Coolant system Oil mist extraction Chip conveyor Operating manual

Condition: repair required (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, CNC milling machine from Kunzmann for industrial machining tasks. Condition: currently not fully operational Djdpfx Aoyyvnwocyewd - Motor spindle does not start. Suspected cause: controller board - Potentiometer defective - Gib strips need adjustment - Maintenance unit missing Manufacturer: Kunzmann Maschinenbau GmbH Model: BA1200 Machine no.: 120006 Year of manufacture: 2003 Machine type: CNC machining center Design: vertical Control: HEIDENHAIN Travel X: 1200 mm Travel Y: 600 mm Travel Z: 600 mm Table size: 1400 x 600 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 63 A Video available on request; the spindle still turns smoothly!

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, CNC vertical machining center "KUNZMANN BA 1000 SK" Equipped with Heidenhain iTNC 530 path control. Year of manufacture: 2013 Travel ranges: X 1020 mm, Y 620 mm, Z 920 mm Spindle speed range: 1 – 14,000 rpm, stepless With the following accessories: Dwedpfx Aeyx Ua Ajcyjd - Fixed angular table, 1200 mm x 610 mm clamping surface - NC attachment rotary table WALTER, diameter 500 mm - B-axis swivel head (torque drive), +30 / -120 degrees - Vertical tool changer with 40 magazine positions (SK 40) - 3D Heidenhain touch probe - Electronic handwheel - Fixed full enclosure with internal lighting - Coolant through spindle (IKZ system) - Coolant system - Oil mist extraction - Chip conveyor - Operating manual

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Dwedpfezqunuex Acyod Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Dodo Af Nzuepfx Acyswd - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC530, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! Dwjdpfx Ajzpwykjcyod TECHNICAL DETAILS Travel in the X-axis: 1,200 mm Travel in the Y-axis: 700 mm Travel in the Z-axis: 750 mm Spindle speed: 8,000 rpm MACHINE DETAILS Control model: Heidenhain TNC 530 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 6.3 A Operating hours Spindle hours: 5,238 h Control on-time: 17,705 h

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 600 015, table mounting size: 750 x 450 mm movements x/y/z: 600/400/600 mm spindle taper: SK 40 ISA min./max. distance table/spindle: 90/690 mm spindle turning speed range: 50 - 8000 rpm number of tool positions: 24 pieces Dodpstuktzofx Acyswd carriages: 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2500 x 2500 x 2800 mm weight: 3200 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Kunzmann Model: WF9 Year of manufacture: 1998 Control system: Heidenhain Dwodpfs Ad Dqcjx Acyod WORKING AREA Travel in X-axis: approx. 800 mm Travel in Y-axis: 500 mm Travel in Z-axis: 500 mm WORK TABLE Table dimensions: 1,200 × 600 mm Number of T-slots: 9 SPINDLE Tool holder: SK40 ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Rated current: 25 A MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,500 mm Width: 1,500 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Heidenhain control system

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 310 CNC control – excellent condition, CE compliant!! Technical data: Dwsdj Ahyl Topfx Acysd >> Year of manufacture: 2006, Machine no. 370562 >> Milling table clamping surface: 800 x 425 mm 6 clamping slots Slot width: 14 H7 Slot spacing: 63 mm Maximum load: 300 kg >> Spindle speeds up to 4500 rpm >> Feed rate range up to 2000 mm/min Rapid traverse rate up to 5000 mm/min >> Travel distances X/Y/Z: 600/400/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and equipment: >> Heidenhain TNC 310 CNC control >> Hydraulic clamping system, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, parts lists, operating manual >> Full-protection enclosure >> Coolant system About the machine: Offered is a Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 310 CNC control. This universal milling machine is in very good condition. It features a very easy-to-use control system. Furthermore, the machine has hydraulic clamping systems for both vertical and horizontal operation. Changing from vertical to horizontal operation is very simple, by folding down the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 124 control – in SUPER condition, CE compliant!! Dwjdpfx Acszq Edmoyjd Technical data: >> Year of manufacture 2007, machine no. 370648 >> Swiveling and tilting table 6 mounting slots Slot width 14 H7 Slot spacing 63 mm Maximum load 300 kg >> Spindle speeds S I 1 – 1125 min-1 Spindle speeds S II 1126 – 4500 min-1 >> Feed rate (potentiometer 100%) longitudinal and transverse 0 – 2000 mm/min Rapid traverse longitudinal and transverse 5000 mm/min Feed rate vertical 0 – 2000 mm/min Rapid traverse vertical 4000 mm/min >> Travel distances X/Y/Z: 600/400/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 7.5 kW Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: We offer a Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. A special feature of this machine is the 4th axis and a digital display for the quill. It comes from a company belonging to an automotive manufacturer, where it was used primarily for training purposes. It has a very user-friendly control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up.

Condition: like new (used), Kunzmann WF 7/3 Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION. CE compliant!! The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours. Technical data: Year of manufacture: 1997 Fixed angular table Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min. Rapid traverse: longitudinal and transverse 5000 mm/min. Feed rate: vertical 0 – 2000 mm/min. Rapid traverse: vertical 4000 mm/min. Travel distances X/Y/Z: 600/400/400 mm Dsdozy Uh Tepfx Acyewd Vertical and horizontal quill - SK40 Hydraulic clamping system Weight: approx. 2000 kg Dimensions: approx. 2 x 2 x 2 m Main drive motor: 7.5 kW Accessories and equipment: Heidenhain TNC 124 control Hydraulic chuck, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power. You can find more milling machines from well-known manufacturers on our website.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool milling machine Kunzmann WF 400MA with Heidenhain 3-axis active digital display. Like-new condition. CE compliant! Technical data: >> Year of manufacture 2015, Machine no. 410749 >> Milling table clamping surface 600 x 375 mm >> 5 clamping slots >> Slot width 14 H7 >> Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed rate up to 5 m/min >> Travel distances X/Y/Z: 410/350/450 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor (100%/25% ED) 8.5/16.2 kW Accessories and equipment: >> Heidenhain 3-axis active digital display Dedpfx Acsztwy Eeyjwd >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: Offered is a Kunzmann WF 400MA tool milling machine with a 3-axis active digital display from Heidenhain. It proves its qualities daily in workshops, production facilities, and training centers. This universal milling machine is in like-new condition. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. Converting from vertical to horizontal operation is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Tool milling machine Kunzmann WF 400MA with Heidenhain 3-axis active digital display – in like-new condition, CE-compliant!! Technical data: >> Year of manufacture 2016, machine number 410737 >> Milling table, clamping surface 600 x 375 mm >> 5 T-slots >> Slot width 14 H7 >> Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed rate up to 5 m/min >> Travel distances X/Y/Z: 410/350/450 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor (100%/25% duty cycle) 8.5/16.2 kW Accessories and equipment: >> Heidenhain 3-axis active digital display >> Hydraulic clamping, vertical and horizontal Dwjdpfsztw I Ajx Acysd >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: Offered for sale is a Kunzmann WF 400MA tool milling machine with a 3-axis active digital display from Heidenhain. It proves its qualities daily in workshops, production facilities, and training centers. This universal milling machine is in like-new condition. Furthermore, the machine has hydraulic clamping in both the vertical and horizontal positions. Converting from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: excellent (used), Manufacturer: KUNZMANN Model: WF 650 Machine type: CNC universal milling machine / CNC machining center Year of manufacture: 2007 Machine operating hours: 20,625 h Spindle operating hours: 3,909 h Control system: HEIDENHAIN iTNC 530 Working area / Travel ranges Travel range X-axis: 650 mm Travel range Y-axis: 500 mm Travel range Z-axis: 450 mm Work table Clamping area: 1,000 × 600 mm Max. table load: approx. 400 kg Main spindle Spindle speed: 12,000 rpm Djdpfezkl Rtjx Acyjwd Tool holder: SK 40 Tool changer: 20 positions Controlled CNC milling head (B-axis) Vertical milling head, swiveling: -5° +95° Feeds and rapid traverses Feed range: 0–4,000 mm/min Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 20 m/min Working area Distance table – vertical milling spindle: 100–550 mm Distance table – horizontal spindle: 270–720 mm Machine weight and connection values Machine weight: approx. 5,500 kg Total power consumption: approx. 20 kW Equipment CNC path control system HEIDENHAIN iTNC 530 3D probe Preparation for 4th axis Electronic handwheel Coolant system Central lubrication Machine lighting Full protection enclosure

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC machining center Kunzmann WF 650 Control system: Heidenhain iTNC 640 Year of manufacture: 2015 Internal machine number: 67 Dodpfezwmbgjx Acyewd Travel ranges: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Rotary table C-axis: Ø 400 mm Tilting range A-axis: +120/-95° Rotational range C-axis: 360° Tool holder: SK 40 DIN69871 Tool magazine: 40 positions Spindle speed: 1 – 12,000 rpm Spindle tilting range: +5 / -92° - Coolant system - Internal coolant - Electronic handwheel HR 510 FS - Chip conveyor

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 3701104, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 4,000 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 1,500 m/min, spindle speed (max.): 5,000 rpm, quill stroke: 60 mm, spindle mount: MK 0, total height: 2,000 mm, total width: 2,500 mm, total length: 2,000 mm, table width: 475 mm, table length: 700 mm, type of input current: three-phase, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,000 kg, input voltage: 380 V, workpiece weight (max.): 300 kg, space requirement length: 2,000 mm, space requirement height: 2,000 mm, input current: 25 A, Equipment: documentation/manual, rotational speed infinitely variable, Well-maintained milling machine from a training center, equipped with a HEIDENHAIN TNC 415B control system and an SK 40 milling spindle. It features a hydraulic clamping system and an automatic central lubrication system, and comes with technical documentation and an operating manual. Dwjdpfxj Ahfihs Acyjd