Parts for the SIDEL blow molding machine

Sidel SBO 16/16

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Ndjdpfx Aeutni Robyjc Full and original technical documentation.

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Ndedpfx Abew D E Uboyec Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Ndodpovlnvrsfx Abyec

Year of construction: 1994, condition: good (used), Manufacturer: Boge Type: V LEX 45 Engine: 45 kW Nodpehtq Dvofx Abysdc Capacity: 6.5 m³/min

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle High-Pressure Compressor Ndjdef Hly Sopfx Abyec Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM The compressor can be inspected at any time.

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Nsdeyb Tuiepfx Abyjdc Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Nedpfx Aswv Trlebyedc Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Controller Fanuc 18i-T NC controlled axes 6 Original Japan With barfeeder FMB mini turbo 2-16 / 3200 A For 3 m bars Max. turning dia 16 mm Max. drilling capacity 7 mm Max. tapping capacity M6 Rapid feed in X/Y/Z/ZB = 20/20/20 m/min Rapid feed in A = 78,5 m/min Feedrate in X/Y/Z/ZB = 10/10/10 m/min Feedrate A = 10 m/min Main spindle speed 500 - 12000 rpm Main spindle power 100/40% ED/Power 2,2 kW Outer tool places 6 Driven tool places 3 Rear side operation Max. turning dia D16 mm Max. part length 85 mm Sub spindle speed 500 - 8000 rpm Sub spindle power 0,55 kW Max. drilling capacity 4 mm Max. tapping capacity M3 Weight 1700 kgs Dimensions LxWxH = 2163 x 770 x 1650 mm Features, accessories - FMB Mini Turbo barfeeder 3 meter - C axis on both spindles - Low volt lamp - Hydraulic unit - Coolant unit (run with oil) Ndjdpfjxvbbfox Abyoc - Central lubrication - Door interlock - Ready part conveyor The lathe was removed from production recently. Good condition.

Condition: used, machine/vehicle number: LC650, Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Macchine Impianti unit (1999)Electrical highlights (components): SMI LSK45 T: 400 V, 50 Hz, 22 kW, 37 A; M.T.A. chiller: 400 V, 50 Hz, 20 kW, 35 A, IP54Advanced Automation & Control SystemsThe line benefits from upgraded controls to ensure repeatable operation and ease of use. Air conveyors for empty bottles and belt conveyors up to the shrink wrapper have been overhauled and equipped with new electrical panels. The capper has also been overhauled with a new electrical panel, supporting stable operation and format reliability.Overhauled conveyor controls with new electrical panelsCapper overhauled in 2012 with new electrical panelCE-marked components across key stationsFormat pre-sets on the labeler for multiple bottle sizesProduction Line Integration CapabilitiesEngineered for smooth in-line operation, this second hand bottling line integrates air conveyors for lightweight PET handling, precision labeling, and robust end-of-line packaging. Quick changeovers are supported by pre-configured labeling formats, enabling efficient switches between common water bottle sizes.Inline configuration from bottle handling through packagingAir conveyors for empty bottles and belt conveyors up to shrink-wrapperLabeling line-up: KHS Innoket 21 N and SACMI OPERA for multi-format flexibilityEnd-of-line shrink wrapping with SMI LSK45 T and pallet stabilization by TOSA 125Bottle size range: 0.5L, 1.0L, 1.5LSuitable for water production (still and carbonated)Machine Condition & Maintenance HistoryThe line includes several components that have undergone maintenance and overhauls aimed at improving reliability and uptime. Air and belt conveyors up to the shrink-wrapper have been revised, with new chains and new electrical panels installed. The capper was overhauled in 2012 and fitted with a new electrical panel. The KHS Innoket 21 N labeler is set up for multiple formats, streamlining changeovers.Conveyors overhauled; new chai... Ndjdpfxezg In Te Abyec

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labeling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labeling stations - bottle transport Njdpfjw Tmt Aex Abyjdc Additional title: years of manufacture: 1975 - 1979 Capacity: 9000 bo/h Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle transport