Gear motor 5.5 kW 68 rpm

SEW-Eurodrive FH87/G DRS132S4BE5HF/TF

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: Iedpsw Niuhsfx Aagoat - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: used, Year of construction: 1974, Technical details: Isdpfx Aou Ix Dcoagoat turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm Iaedpfxevx Uvxe Aaget bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: new, Year of construction: 2026, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° Iajdpfx Aaovxhi Eoget 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Iaedpjpiarnsfx Aagjt Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: new, distance between shaft and table: 470total power requirements: 2,2 kwweight approx.: 1,2messurements (LxWxH): Länge2400 mm Breite/Tiefe2160 mm Höhe2300 mm Gewicht 1200 kgspindle rotation speed: 60 4200 min¯¹ Ieded H Hhzepfx Aageat

Condition: new, range L-W-H 1210 x 470 x 910 mm 5 St. weight 68 kg Tool trolley, workbench with 5 drawers and a door. Internal dimensions of the top 4 drawers 495 x 410 x 95 mm. Internal dimensions of the 5th drawer 495 x 410 x 200 mm. Ijdpfx Aju Imdweagsat Internal dimensions of the shelf behind the door 430 x 420 x 700 mm. Wheel dimensions 100 x 30 mm.

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 • Simple three-point hitch • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height Iasdpfer Ezniex Aagst • Offset of 1.30 m on each side of the axis • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Iedpfjv Rgzwox Aagsat Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Iodpfx Aast S Sxgogeat Screw diameter approx. 370 mm Drive via geared motor