Screw compressor

Atlas Copco GA 55 VSD FF

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Kdsdpfx Aasxk U Alslsi Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: new, feed pressure 11 bar intake capacity 480 cm³ volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW turning speeds 892 U/min Kdedpfx Asvkizgsalsi weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 135 h, load capacity: 230 kg, empty load weight: 7,600 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated boom lift Transmission: Hydrostatic Condition: As new Technical condition: Very good Front tyres type: Solid rubber Front tyres size: 18 Front tyres condition: 80 - 100% Kjdpfx Aoupauqealsdi Rear tyres type: Solid rubber Rear tyres size: 18 Rear tyres condition: 80 - 100% Description: The 180 ATJ articulated boom lift offers a lifting capacity of 230 kg with a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloped, and obstructed surfaces. Its off-road capability makes it the ideal working partner on construction sites with rough terrain. Thanks to the new progressive hydraulic speed control, both noise levels and fuel consumption are reduced. Like other engine-powered work platforms, its 4-wheel drive and 3 steering modes make maneuvering and positioning the machine easy on congested or tight sites. The design of the control panel ensures a clear operating environment for quick handling and immediate productivity. 230 V generator and sockets in the platform basket, SMS Safe Man System

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Ksdpfx Aaoxdc Uvelodi

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,950 h, functionality: fully functional, overall weight: 916 kg, total length: 1,200 mm, total width: 1,100 mm, total height: 2,000 mm, motor manufacturer: Atlas Copco, power: 55 kW (74.78 HP), fuel type: electric, volume flow: 650 m³/h, operating pressure: 13 bar, Equipment: documentation/manual, type plate available, Atlas Copco Screw Compressor Model: FA55VSD+ Year of manufacture: 2020 Operating hours: 8,950 h Motor rated power: 55 kW Pressure: 4.0 to 13.0 bar Volume flow: 182.5 l/s or 10.9 m³/min Voltage/Frequency: 400 V / 50 Hz Kjdpfx Aajx Dfmzoledi Dimensions (L/W/H): approx. 1,200 / 1,100 / 2,000 mm Weight: 900 kg The compressor is in excellent working condition and has been regularly inspected and maintained. It is currently still powered and can be viewed in operation. An associated air dryer and compressed air tank can be purchased optionally (see further listings).

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Kodpfx Aaeu Rptyeljdi Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: good (used), Year of construction: 1992, machine/vehicle number: 9207102, Offer 12001 Technical data: - material thickness 1,25 mm - max. throat 180 mm - roller center distance 63 mm - max. material thickness at 40 kg/mm² strength 1,25 mm - working speed approx. 6 + 12 m/min - drive 400 V / 0,7 / 0,85 kW - space requirement approx. W 550 x H 1250 x D 1000 mm Kodpfx Aaoi Hpmteledi - weight approx. 120 kg - with: - E - foot switch

Condition: excellent (used), functionality: fully functional, overall weight: 950 kg, color: yellow, fuel type: diesel, fuel tank capacity: 80 l, motor manufacturer: Deutz D2011L03, total length: 3,740 mm, total width: 1,410 mm, total height: 1,360 mm, power: 36 kW (48.95 HP), volume flow: 318 m³/h, operating pressure: 7 bar, pressure (min.): 4 bar, pressure (max.): 8.5 bar, noise level: 98 dB, Year of construction: 2016, operating hours: 1,190 h, next inspection (TÜV): 04/2025, machine/vehicle number: APP418299, Equipment: UVV, - Hood and body made of impact-resistant, robust polyethylene Kdjdpfx Aastwz Ezslei - Overrun and parking brake with automatic reverse function - Tool oiler - Choice of truck DIN towing eye or car ball head coupling, height-adjustable towing device Next pressure vessel test in accordance with Directive 87/404/EEC due in May 2026 If you have any questions, please contact us personally.

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software Kjdpst Hw S Iofx Aaljdi

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm Kdjdpemiik Tjfx Aalsi