Used Toyoda Fa 800 for sale (14)

Condition: used, Year of construction: 2001, Toyoda 'FH100 II' Twin Pallet Horizontal Machining Centre with Fanuc 16i-M CNC Control Hfjdpfx Asxvx Rweh Hep X' Axis Approx 1,600mm, 'Y' Axis Approx 1,400mm, 'Z' Axis 1,100mm; Feed (X) Approx 950mm; (2) Pallets, 1050mm x 1050mm, Max Load 3,000kg; (120) Station ATC; Minimum Index angle 1°; Distance from Table Surface to Spindle Centre Approx 50mm-1,450mm; Distance from Table Centre to Spindle Nose 20mm-1,400mm; Geared Headstock; Max Tool Dia (Adjacent Pockets) 120mm; Max Tool Length 600mm, Max weight per Tool 35kg; Spindle Taper BT50; Spindle Speeds 10-6,000 RPM; S/No. 9224. Weight of Machine Approx 30,000kg; Floor Space Required Approx 4,565mm x 8,300mm; Stand Alone FSE Filtration System with Controls; MistMaster Extraction System; Access Platform; Shernidian Electric PS-111 Motor Starter; Handy Pulser Generator Hand Wheel.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Hfodpfxoxvw I Is Ah Hep Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 12,976 h, functionality: fully functional, machine/vehicle number: NSO997, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller model: FANUC Series 30i, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Z-axis): 800 mm Travel (Y-axis): 850 mm Magazine Positions: 120 Spindle Speed Range: 50–15,000 rpm Spindle Diameter (Front Bearing I.D.): 80 mm Spindle Taper: ISO R297 / Taper No. 40 Tool Holder: MAS I Type P40T Table Pallet Size: 550 × 550 mm Max. Rotary Table Swivel Range: 360° Pallet Height: 750 mm Distances Distance Between Spindle Nose and Table Center: 150–1,000 mm Distance Between Spindle Nose and Table Surface: 50–850 mm Feed Rates Rapid Traverse X-, Y-, Z-Axis: 60,000 mm/min Cutting Feed Rate (X-, Y-, Z-Axis): 0.001–30 mm/min Hedpfxsxqmbge Ah Hjfp Tool Changer (ATC) Number of Tools: 40 Tool Size (Ø × Length): Ø75 × 470 mm Tool Weight: 8.0 kg Tool Change Time (Tool to Tool): 1.3 s Performance Data Positioning Accuracy (X-, Y-, Z-Axis): ±0.003 mm Repeatability (X-, Y-, Z-Axis): ±0.0015 mm Pallet Load Capacity: 800 kg Thrust Force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Footprint: 2,750 × 5,700 mm Machine Weight: 16,000 kg Motors Spindle Drive Motor (15 min rated power): 22 / 18.5 kW Hydraulic Pump Motor: 3.7 (4) kW Operating Hours Machine Running Hours: 12,976 h Control Powered Hours: 112,997 h

Condition: ready for operation (used), Year of construction: 2002, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH MULTI-PALLET SYSTEM X-AXIS TRAVEL: 1000 mm Y-AXIS TRAVEL: 850 mm Z-AXIS TRAVEL: 750 mm Hsdpfx Aheq Drw Ej Hofp DISTANCE SPINDLE NOSE-TABLE: 50 - 900 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 15000 rpm; 30 kW; ISO 50 - BT PALLET: INDEXING ; N.15 ; 630x630 mm HIGH PRESSURE COOLANT: 70 Bar TOOL MAGAZINE: CHAIN-TYPE ; 225 POS MAX TOOL DIAMETER: 120 mm MAX TOOL LENGHT: 500 mm MAX TOOL WEIGHT: 27 Kg CONTROL UNIT: FANUC 16i-M ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; TOUCH PROBE

Condition: used, Year of construction: 2007, number of spindle speeds 6.000 U/min tool taper BT50 numbers of positions in the tool changer 121 control FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg Hfsdpfxst I Ec Dj Ah Hep The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller FANUC Series 18i-MB Table size 1300 x 650 mm Table load 1500 kgs X travel 1100 mm Y travel 650 mm Z travel 600 mm Spindle speed 12000 rpm Tool holder type MAS BT40 ATC magazin 30-fold Weight 7200 kgs Dimensions LxWxH = 3100 x 2300 x 3100 mm Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Hodpfx Ahouu Rzro Hjfp Very good condition.It will be sold because of liquidation of production.

Condition: used, Year of construction: 1973, Additional flanges and a spindle for internal grinding are included with the machine. The Jones was completely disassembled and inspected; it works flawlessly. The price is for one machine. Hedpfx Aow Dvwaoh Hofp

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Hsdoxvw Izepfx Ah Hefp Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 15,289 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 121, TECHNICAL DETAILS Travel Paths X-axis travel: 750 mm Y-axis travel: 800 mm Hfsdpfx Ahjxnwq He Hep Z-axis travel: 850 mm Work Table (axis operated by AC servo motor) Pallet size: 550 x 550 mm Smallest indexing increment: 0.001 degrees Spindle Tool taper: #50 Drive power: 30/22 kW Spindle speed: 15,000 rpm Tool Magazine Tool stations: 121 tools Magazine type: Chain magazine Specification: BT-50 MACHINE DETAILS Control: FANUC 31i Installation dimensions (L × W × H): approx. 2,780 × 1,500 × 2,300 mm Operating Hours Running time: 15,289 h Control On-Time: 106,856 h EQUIPMENT Coolant system Renishaw infrared tool probe OMP 60 BT 50

Condition: good (used), Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 69 kVA, torque: 323 Nm, controller manufacturer: FANUC, controller model: 31i, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 850 mm, total height: 3,000 mm, total length: 3,120 mm, total width: 5,447 mm, table width: 550 mm, table length: 550 mm, table load: 800 kg, rotational speed (max.): 40 rpm, overall weight: 16,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 10,000 h, coolant supply: 70 bar, spindle motor power: 22,000 W, spindle nose: BT-50, number of slots in tool magazine: 120, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, KNOLL chip conveyor belt KNOLL lubrication unit 1000 Liters High pressure 70 Bar Hfodpfxjwyzuve Ah Hop 5 pressure levels Spindle 15,000 rpm BIG PLUS Scale encoders on X, Y & Z axes 120-tool BT50 magazine Tool breakage detection Continuous B axis (4th axis) Touch probing function RENISHAW MP60

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Hsdpfx Ahjfbml Ne Hofp Feed speeds 15000 mm/min. Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Dimensions in mm: about 3000 x 5000 x 2900 Weight in kg: about 13000

Condition: excellent (used), Year of construction: 2011, Year: 2011 (Commissioned in 2015) Table - Size range: 630mm - Positioning of the sub-table: 1 ° - Positioning of the turntable: 0.001 ° - Height of pallet: 1200mm Travel - X-axis: 1000mm - Y-axis: 800mm - Z axis: 850mm - Distance between spindle center and table top: 200mm - 1050mm - Distance between spindle center and top of range: 100mm - 900mm feed - Rapid (same for X-, Y-and Z-axis): 60m/min - Cutting feed (equal to X, Y & Z axis): 0,001 - 30m/min spindle - Spindle speed: - min 14,000 rpm / 35 Hfedonmx Tpopfx Ah Hop ATC (Automatic tool changer) - Number of tools: 60Stk. - Tool change time (tool to tool): 2.4 s - Tools used: SK 50 / debit pin BT Capacities - Operating Oil: 53l - Slide lube oil / lube spindle head: 3,0 l - Coolant for spindle & ball screw head: 37l Services - Positioning (X, Y, and Z-axes): + - 0.003 mm - Repeatability (X, Y, and Z-axes): + - 0.0015 mm!! - Payload Pallet: 800kg - Axial: 14700N

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Toyoda In Process Gaging Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual Hfedpfx Ahjrtrzpo Hsp -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L

Condition: excellent (used), Year of construction: 2005, Horizontal machining center TOYODA FH 550 S 2005 FANUC Series 30i Technical data: Travel X 750 mm Travel Z 800 mm Travel Y 850 mm Main spindle 15,000 22/30 /min. kW Rotary table 0.0001 120-position tool magazine Hfedpfx Aowr Akvoh Hop