Edge banders SCM Stefani One Touch F 2011

SCM Stefani One Touch F

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator Dcjdpfsyuylujx Adhjn 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Dodpfet Hal Dex Adhjcn Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 30,000 mm, total length: 65,000 mm, total height: 10,000 mm, GALVANIZED STEEL STRUCTURE FOR A 1,950 M2 WAREHOUSE Industrial warehouse with a floor area of 1,950 m2, designed for a location near the sea, with the following dimensions: Dcjdpfx Adszuar Tohjn DIMENSIONS: Width: 30 m (Exterior). Length: 65 m (Exterior). Height: 10 m (Clear Interior). Two-pitched roof with a 10% slope. Constructed with S 275 grade steel profiles, rolled and galvanized for the main steel structure, and galvanized formed sections for the secondary roof purlin structure. The finish of the Main Structure (Columns, Beams, and Trusses) will be hot-dip galvanized at 450°C according to UNE-EN ISO 1461:2009 standards. In the case of the THC profiles of the Trusses, they will also be galvanized on the inside, ensuring complete protection of this structure, both on the inner and outer faces of all its profiles. INCLUDES: - CE marking for steel structures according to UNE-EN 1090-2:2011. - Detailed engineering, calculation report, structural drawings, and foundation plans. - APPENDIX OF CALCULATIONS APPROVED BY THE ENGINEERS’ ASSOCIATION, complying with data, loads, and assumptions provided by the client. - Certified fasteners for the assembly of the structure. NOT included in the budget: Anchor plates and purlins. These can be manufactured upon request. Transport and packaging not included. Delivery conditions EXWorks, including loading onto a truck – Talleres Ruiz FCA – Pol. La Portalada C/ Nevera, 3 26006 Logroño (La Rioja) - SPAIN - Incoterms® 2020 CE marking and manufacturer's warranty with more than 60 years of experience in the sector.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Dcedpfx Adszc Ilxohsn

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR, Hot Air Dcjdpfx Adsx A Tgyohon Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: new, Year of construction: 2025, functionality: fully functional, power: 9 kW (12.24 HP), cutting height (max.): 82 mm, saw blade diameter: 315 mm, rotational speed (max.): 4,400 rpm, total length: 3,300 mm, total width: 3,350 mm, overall weight: 3,000 kg, cutting length (max.): 3,300 mm, feed rate X-axis: 100 m/min, feed rate Z-axis: 150 m/min, saw blade speed: 4,400 rpm, saw drive: 9,000 W, Equipment: rotational speed infinitely variable, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control: PA-WIN10 + SIMATIC S7 | Powerful panel dividing system for highest precision & efficiency The SCHEER PA 4500 is a robust, industrially proven panel dividing saw for the precise processing of coated and uncoated wood-based panels. It was designed for demanding applications and already meets all the requirements of modern cutting operations in its basic configuration. Main technical data: Cutting length (max.): 3300 mm Cutting height (stepless): up to 82 mm Main saw blade: Ø 315 mm | 60 teeth | cutting width 3.2 mm Scoring saw blade: Ø 200 mm | conical | cutting width 3.2–4.0 mm Saw motor: 9.0 kW Scoring motor: 1.1 kW Saw carriage drive: 2.32 kW Main saw blade speed: approx. 4400 rpm Saw carriage feed: 0–100 m/min (stepless adjustable) Saw carriage return: 150 m/min (lowered) Electrical connection: 400V / 50Hz / 3Ph Pneumatics: 6 bar, 15 NL/stroke Extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s Working height: approx. 930 mm Angle stop: left Machine concept & highlights: Heavy cast honeycomb construction for vibration damping Absolute value encoder for highest positioning accuracy (no referencing) Distance- and time-optimized saw carriage operation Automatic oil mist lubrication & blowing of the guides Program-controlled saw blade adjustment (height & scoring side) ProLock quick-release system for the saw blade “wood dust tested” – emission only 0.65 mg/m³ System equipment: 1x angle pressing device WP 8500-1400 Dodpjwrpcxjfx Adhscn Adjustment range: 0–2200 mm Pressing force: approx. 480 N Cycle-controlled retraction function for panel transport 1x material feed table HP 5130 – 33 x 33 Mounted at the back with hardened guides & racks Roller conveyor system for easy panel transport 6 clamping fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy 1x angle stop table HP 5137-1-1465 1x workpiece support table HP 5135-1-1465 Pertinax coating, each 1465 x 800 mm 1x air cushion unit LK 5169 central radial fan, pressure max. 2800 N/m² 1x control cabinet dustproof, separately mounted, vibration protected 19" TFT flat screen, keyboard, trackball Control & software: SIMATIC WinLC RTX soft PLC with S7 functionality PA-WIN10 operating interface on Windows 10 Professional (64 bit) (update to the latest Windows version possible at any time) True-to-scale real-time simulation and graphical cutting plan editor Integrated interfaces (label printing, panel warehouse management, etc.) Network-capable, future-proof, modularly expandable Operating modes & operation: Manual operation: single, chain dimension, trimming, residual cutting Automatic operation: cutting plan processing, online order processing Editor: parts list-based planning & optimization Maintenance & diagnosis: saw blade measurement, individual control, and more 📞 Contact us for an individual offer or a viewing. Delivery, installation, commissioning, and training possible as options.

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Dcsdsu Hldmjpfx Adhsn Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg Dcjdpfx Adewv Uq Aehjn - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm - Feed speed: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: good (used), Year of construction: 2008, I sell the panel beam saw BIESSE SELCO EB75. Year 2008. Cutting size 3800x3800mm. Cutting height 75mm. Main motor 7,5kW Scoring motor 2,2kW Total area covered W.5422mm x D.7688mm Gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Very good condition. Available immediately. Dcedpfxsvw Nkhe Adhon

Condition: new, Year of construction: 2023, functionality: fully functional, Machine is new, packed and ready for transport in Sellers warehouse in Croatia ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - "RT-V1" pre-milling unit - "VC-VM" gluing unit (Installed power: 3 Kw, Heating time: 12 min , Glue pot capacity: 1,5 kg) - "SGP" - Smart Gluing Pot - "K/SEL" end cutting unit (Motors power: 0,35 kW, Speed of tools: 12.000 rpm) Dcjdpfxeza U H Rj Adhon - "R-K" trimming unit (Motor power: 0 ,55 kW, Speed of cutters: 12.000 rpm, Exceeding material to the panel thickness: 2+2 mm, Min. panel thickness with radius: 12 mm, Vertical/front copying devices: disc/pad, Tool radius: 2 mm) - "ROUND X" rounding unit (Motor power: 0,35 kW, Speed of cutters: 12.000 rpm, Edge thickness: 0,4 3 mm, Panel thickness with a straight angle: 10 50 mm, Panel thickness with a shaped angle according to the profile): 10 30/40 mm, Tool radius: 2 mm) - "RAS-HP MULTIEDGE 2R" edge scraping unit - "Nesting" copying device TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm