Thickness planers SCM S 520 2005

SCM S 520

Condition: excellent (used), SCM S520 Thickness Planer Working width: 520 mm Djdpfx Agsx Hfg Nokeki Working height: 250 mm Adjustable feed speed: 4 steps Cutterhead with traditional knives 4-knife cutterhead Power: 4 kW Weight: 670 kg

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Dkodpfxsxdl U Es Agkoi

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Dkjdpfxju Damde Agkji

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Dsdpfx Agjxraimekeki Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: excellent (used), functionality: fully functional, SURFACE PLANER model SCM F 520 second hand machine n.4 knives Tersa length of ground surfaces: 3000 mm hydraulic foot pedal lift Dodpewt T Hdofx Agkeki volts: 380/50 Other models available as shown in the photos second hand machines

Condition: excellent (used), SCM Flex 1 Tenoning Machine Spindle diameter 40mm Total spindle height 200mm Two-speed motor with a power of 6.6/8kw Dkodpfewtf Adsx Agksi Variable speed on belts: 3250/6500 and 5000/10000r.p.m Electric spindle lifting Maximum cutter size 270mm 2.2kw cutting saw unit Automatic side trolley Pneumatic material clamps Four-roller feed

Condition: good (used), Tailstock Quill size: MK 2 Quill stroke: 30 mm height-adjustable Tip height of 250-285 mm of - 5 degrees to plus 15 degrees of tilt Floor area 230 x 155 mm Weight 27 kg Dkodpfxjdlp Txo Agkji

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Dsdpfxjtr A Eve Agkeki Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Number of axles: 3

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Dodpfx Agewxz U Hskjki Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: excellent (used), Working width 500mm Motor power kW 4 Dksdett I E Ispfx Agksi