Multisaw SCM M3

SCM M3

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, cutting width (max.): 300 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, saw blade bore: 70 mm, actuation type: electric, - Operating manual, DTR - Italian production TECHNICAL SPECIFICATIONS: - Track width: 300 mm Lrsdpfsym Ag Sjx Apmop - Cutting height: 120 mm - Max. blade diameter: 350 mm - Motor power: 30 kW - Table width: 750 mm - Min. workpiece length: 600 mm - Feed speed adjustable via gearmotor - Three rows of anti-kickback pawls - Possibility to mount a board – shoe - Spindle diameter: 50 mm - Sleeve diameter: 70 mm - Sleeve equipped with spacers - Automatic central lubrication - Four upper feed rollers - Extraction port diameter: 200 mm - Machine dimensions (L/W/H): 155 / 165 / 160 cm - Weight: 1800 kg

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Lrodov Si Szepfx Apmsp Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), CATALOG NUMBER 7946 Technical Data: - Track width: 300 mm - Working width of shaft: 300 mm - Max. blade diameter: 350 mm - Blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 1030 mm - Table length: 1840 mm – Top: - Kickback protectors (anti-kickback barrier): 2 rows - Metal feed roller, pressure type - Kickback protectors - Metal feed roller, pressure type - Shaft with saw blades - 2 smooth metal feed rollers – Bottom: - Guide rail - Kickback protectors - Track - Laser - Central lubrication of track - Stepless feed speed adjustment Lrjdpfxoy Uxy Sj Apmsp - Feed motor: 1.1 kW - Main motor: 18.5 kW - Extraction outlet diameter: 200 mm - Overall dimensions (L/W/H): 1900x1800x1600 mm - Weight: 1770 kg Advantages: – Italian made – With laser – Unpainted – In very good condition – Used multi-blade saw Net price: 55,900 PLN Net price: 13,300 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 8028 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 80mm - max. cutting height 120mm - table width 750mm - table length 1540mm * from above: - pushers (barrier protecting against material kickback) - sliding roller, metal, pressure roller - pushers/pawls - sliding roller, metal, pressure roller - roller with saw blades - 2 smooth, metal sliding rollers * from below: - guide rail (pneumatically adjustable) - pushers/pawls - track Lrjdpfx Apozmfr Asmop - central track lubrication - stepless feed speed adjustment - feed motor 1.1kW - main motor 25kW - dust extraction nozzle diameter 1x200mm, 1x120mm - overall dimensions L/W/H 2430x1530x1450mm - weight 1540kg ADVANTAGES – Made in Italy – Guide rail – pneumatically adjustable – Very good condition – Used multi-blade saw Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Lrjdpfx Ajv Erkaopmsp Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Lsdpshp Rc Iofx Apmsrp Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: used, Second-hand machine Features and technical specifications: Lrjdezk N Ucspfx Apmsp High-performance multi-blade saw Heavy-duty grey cast iron construction Robust conveyor chain consisting of precision links connected directly to one another Wear-resistant guide surfaces on the conveyor chain with an extremely low coefficient of friction Automatic chain lubrication Quadruple saw shaft bearing arrangement for maximum stability Saw sleeve with conical seat and self-centring 4 pressure rollers for precise cuts even with thin workpieces 4 rows of slitter and return fingers Cutting height up to 110 mm with a 350 mm saw blade diameter Min. cutting length 250 mm Clamping width of the saw sleeve 300 mm Min. and max. saw blade diameter 200/350 mm Saw shaft speed 4,200 rpm Feed speed 4–48 m/min Conveyor chain width 300 mm Saw chuck diameter (with 2 wedges 20 x 5 mm) 70 mm Workbench height 750 mm Extraction connection diameter 200 mm Air flow rate at 25 m/s: 3,500 m³/h Motor 25 kW Feed motor 1.1 kW with laser alignment beam 1,800 kg Sound emission 98.3 dB W(A) at idle without extraction during operation 107.1 dB W(A) Workplace-related emission level 81.8 dB W(A) at idle without extraction during operation 91.2 dB W(A) Availability: at short notice Storage location: 63934 Röllbach

Condition: new, Brugger HX16 Pro professional petrol wood chipper. This wood chipper is designed for professional use, and thanks to its high-quality construction and powerful driving force, even heavily branched material is no problem! Lrjdpemfnz Ejfx Apmjp With ease, it processes logs with diameters of up to 16 cm. It is powered by a strong 35 HP Rato gasoline engine and also features a No-Stress automatic system that prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system and can easily pass the TÜV inspection. It offers: Maximum log diameter: 16 cm Feed opening: 16.5 cm x 30 cm 35 HP Rato gasoline engine No-Stress Automatic Feed System Hydraulic feed Weight of 730 kg Price + VAT. Delivery available throughout Europe. -- Trailer-mounted chipper, wood chipper, wood shredder, branch chipper, branch shredder, professional chipper, wood shredding machine.

Condition: excellent (used), CATALOG NUMBER 7901 Technical specifications: - track width: 300mm - working width of roller: 300mm - max saw blade diameter: 350mm - saw blade bore diameter: 70mm - max cutting height: 120mm - table width with extension: 750mm - table length: 1530mm Lrodpfxozkt U Ts Apmsp - from above: - kickback prevention barriers (safety barrier against material reverse) - metal sliding roller - kickback prevention barriers - metal sliding roller - shaft with saw blades - 2 smooth metal sliding rollers - from below: - guide rail - kickback prevention barriers - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.5kW - main motor: 22kW - brake - suction nozzle diameter: 200mm - overall dimensions (L/W/H): 2300x1370x1570mm - weight approx.: 1700kg ADVANTAGES – Italian manufacturing – very good condition – technical DTR documentation – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR (calculated at 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - Track width: 300 mm - Shaft working width: 300 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm – From above: - Kickback barriers (anti-return block for material) - Metal roller guide - Kickback barriers - Metal roller guide - Shaft with saw blades - 2 smooth metal idler rollers – From below: - Guide rail - Kickback barriers - Track (caterpillar) - Central track lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 37 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 1800x1550x1500 mm - Weight: approx. 1700 kg Lsdpfx Ajzh Ixbopmjrp Advantages: – Italian manufacture – Very good condition – DTR technical documentation – Used multirip saw Net price: PLN 33,900 Net price: EUR 8,070 (based on EUR/PLN 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm Ljdpfxjw H Rq Ho Apmsrp - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: excellent (used), CATALOGUE NUMBER: 8029 TECHNICAL DATA - track width: 300mm - working width of the roller: 300mm Lrsdpfx Apezhbafemjp - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with extension: 760mm - table length: 1540mm * from above: - deflectors (barrier to prevent material from recoiling) - metal feed roller, with pressure - deflectors/pawls - metal feed roller, with pressure - saw arbor - 2 smooth, metal feed rollers * from below: - guide strip - deflectors/pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.1kW - main motor: 18.5kW - diameter of dust extraction nozzle: 180mm - overall dimensions (L/W/H): 2250x1450x1600mm - weight: 1570kg ADVANTAGES - Made in Italy - Very good condition - Used multi-blade saw Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8031 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 1030mm - table length 1740mm * from above: - kickback pawls (barrier to prevent material from retracting) 2 rows - sliding roller, metal, pressure roller - kickback pawls/ratchets - sliding roller, metal, pressure roller - roller with saws - 2 smooth, metal sliding rollers * from below: - guide strip - kickback pawls/ratchets - track - central, electric track lubrication - stepless feed speed adjustment - feed motor 1.1kW - main motor 25kW - dust extraction nozzle diameter 1x200mm, 1x120mm - overall dimensions L/W/H 2550x1800x1450mm - weight 1770kg ADVANTAGES Lsdpfxjzha Izs Apmsrp - Made in Italy - Unpainted - Very good condition - Used multi-blade saw Net price: 57900 PLN Net price: 13786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. Lrsdeuu Ntgepfx Apmjp - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: excellent (used), Year of construction: 2006, track width: 300 mm cutting height: 120 mm max. disc diameter: 350 mm motor power: 30 kW table width: 750 mm feed adjustable via frequency inverter fence adjustable pneumatically Lrsdpfx Aowxrrvjpmjp