Paint shop

Schuko

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Dwsdpfx Aozb N T Uokreb Storage location: Nattheim

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x1910(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Lighting: 2 pcs 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us Djdeia Taxepfx Akrewb

Condition: used, Year of construction: 1999, Second-hand fan Centrifugal fan with V-belt drive Suitable for use in both raw air and clean air applications Dwsdpozk Niyjfx Akrsb Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Discharge direction GL 360/5 Connection: 300 mm Motor power 11 kW Air flow rate 7,000 m³/h Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 43 m³/h, filter area: 43 m², Equipment: CE marking, documentation/manual, a SCHUKO dust extraction system with 5 metal containers and a 43 m³ filter area; can also be sold as a complete set including the entire installation. Dsdpfezzzg Sex Akrowb

Condition: new, Year of construction: 2025, Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the automatic lid capping machine. The positioning and closing of the lids are fully automatic. - Specifications: filling range: 30-3000ml; number of filling heads: 2; max. speed of the machine in neutral: 50 cycles/minute; SUS304, product contact parts from SUS3316; dimensions and weight of the packaging system depending on the final layout. Dodpfx Akjv Nk R Horswb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Djdpfxjvxk Ans Akrjwb Storage location: Nattheim

Condition: used, Second-hand Schuko radial fan for wall mounting, for extracting wood dust, shavings and similar materials. Technical data: Dodezw Ewgepfx Akrowb - Motor: 4 kW - Connection: 250 mm

Condition: good (used), Code: 0372 Brand: CASOLIN Model: TOP 530 Automatic thickness planer for wood, joinery, furniture, customer-made furniture, wooden joinery, doors, panels, timber framing, sawmills, plastics, composite materials and various Dwodpfx Akoy Hvuderob Features: Cast iron work table supported by 4 ground columns with inner rise screw syncronously which guarantees the greates rigidity, the work surface of thicknessing table, worked with a particular processing, guarantees excellent performance of guidance and sliding of the workpiece Automatic locking of thicknessing table Shaft with 4 replaceable cutters ‘TERSA’ Rear pressure roller adjustable to 3 positions Steel feed rollers Technical data: Max working width 530 mm Work table dimensions 530 x 1060 mm Max working height 300 mm Min working height 3 mm Useful thickness 8 mm N° 4 replaceable cutters ‘TERSA’ Shaft rotation speed 5000 rpm Feed speed 4-7-11-17 mt/min Main motor 5,5 Hp Automatic table lift Suction inlet diameter 160 mm Overall dimensions mm 960 x 1080 x 1100 h Weight kg 970

Condition: used, Year of construction: 2022, Demonstration Unit Year of Manufacture: 2022 Condition: Like new, 0 operating hours Features and Technical Specifications: - Sound-insulated, “Silent and SaveEnergy” - With automatic shutdown - 2 fans, speed controlled via inverter - Jet cleaning - Filter categories M and H3 - Filter area: 50 m² - Airflow: 6,927 m³/h Dwjdpjzwqd Sjfx Akrsb - Negative pressure: 3,365 Pa - 4 collection containers - Motor: 2 x 5.5 kW - Total power consumption: 11 kW - PLC touchscreen control - Intake port: 350 mm - Weight: 1,160 kg - Dimensions: 3,900 x 1,620 x 2,660 mm - Current list price: over €30,000 net, ex works

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. Dwodozp Edwopfx Akreb All specifications according to the manufacturer.

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm Dwsdpfxsma Dkfs Akrjb fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Dwedpfx Aksxvivqerob Location: ex-site Saarland

Condition: used, Year of construction: 2022, Extraction system Manufacturer: Schuko Type: Solo-160-2323/30/182/BD Year of manufacture: 2022 Technical data - Length x Width x Height: 2400x2400x10000 mm - Airflow: approx. 15,500 m³/h - Type of dust: Plastic, chips (dry) - Filter hose diameter: 160 mm - Filter hose length: 3000 mm - Total filter area: 182 m² - Rotary valve: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Djdpezu Ah Refx Akrjwb

Condition: used, Year of construction: 2001, PET filling line from KHS Dodpfx Aksvu Tuferjwb Additional title: with palletising and depalletising Performance at 1 liter: 24000 bottles/h Formats: 0,5 L and 1 L bottles Features: Depalletizer, Air transport, Rinser, Filler incl. height control, Mixer, Packing, Crate washer, Palletizer

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 9690 m³/h -Total pressure: 3038 Pa -Motor: AEG 18.5 kW 1460 rpm -Connection input: Ø 350 mm -Connection output: Ø 360 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø810 x 200 mm -Dimensions total: 1220/785/H1500 mm Dwjdpfxov Ni Uwe Akreb -Weight: 396 kg