Cross roller guide

Schneeberger 9700

Year of construction: 2000, condition: good (used), CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 Kodpfsfrbcksx Aa Eonf grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: Ksdpsrz Nflefx Aa Eonf The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Year of construction: 1998, grinding length 800 mm grinding width 500 mm workpiece height 425 mm total power requirement 15 kW weight of the machine ca. 4,5 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : GEIBEL & HOTZ CNC Cycle Controlled Precision Surface Grinding Machine model FS 850 GT SL year 1998 Serial no 1012580698 _____ Grinding length max. (table movement 900 mm) 800 mm Grinding width max. (cross movement 500 mm) 500 mm Mounting height under new grinding wheel 425 mm size of magnetic plate 800 x 500 mm Max. table load 1.100 kg Table speed 2 – 28 m/min Kodpet Hxamsfx Aa Eenf Cross feed intermittend 3 – 60 mm/stroke Cross-/Vertical quick feed 4.000 mm/min Grinding wheel measurements 400 x 100 x 127 mm Grinding spindle-drive approx. 9 kW Total electrical load approx. 22 kW - 400 V - 50 Hz Weight approx. 4.500 kg Accessories / Special Features: • Dialog-guided GEIBEL & HOTZ automatic CNC cycle control model SL for 3 axes. Graphically supported data input in absolute dimensions or via teach-in procedures for preprogrammed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and easy monitoring axis movements and work progress. • Electronic handwheel for 3 axes X, Y, and Z, feed rate switchable from 0.01 / 0.1 / 1 mm/rev. • table movement is effected by a rolling ring thread drive (GT), which allows both very high and very low table speeds with constant torque and very high efficiency. • cross and vertical movements are effected by a ball screw drive with incremental glass scale. • Single-point diamond dresser mounted on the table for aut. dressing cycle and aut. compensation • MPM automatic grinding wheel balancing device. • Mounted electromagnet plate 800 x 500 mm with adjustable holding force • Wet grinding facility with universal fleece belt filtration unit • Complete enclosure of the working area with electronically safeguarded sliding doors • sep. switch cabinet, sep. mobile control panel, various accessories, manuals , etc. Condition : very good, with the wide grinding wheel for large surface grinding ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We do always have a large selection of Grinding machines in stock – please let us know your requirements !

Condition: used, TECHNICAL DETAILS - distance between centers : 600 [mm] - center's height : 175 [mm] - table orientation : 11 [°] UNIVERSAL GRINDING WHEEL HOLDER HEADSTOCK - left grinding wheel dimension : 400 x 50 x 127 [mm] - right grinding wheel dimension : 225 x 20 x 76,2 [mm] - motor power : 3 [kW] - spindle speed : 1500 / 1700 / 2200 Kedpfx Aeuhbywoa Eenf - grinding-wheel holder headstock orientation : 270 [°] PART HOLDER HEADSTOCK - part-holder headstock orientation : 360 [°] - spindle speeds : 20 - 400 [Rpm] - internal taper : Morse 5 - motor power : 0,9 [kW] TAIL STOCK - internal taper : CM4 - quill stroke : 30 [mm] DIMENSIONS - floor surface : 2580 x 1680 [mm] - height : 1670 [mm] - weight : 2200 [kg] EQUIPMENT - broche intérieure FISCHER : 14.000 [tr/min]

Year of construction: 1985, condition: reconditioned (used), REFORM type AR 10 type 40H face grinding machine year of manufacture 1985 30 KW grinding motor Control Modicon Magnetic control 6-stage magnet size: 1000mm300mm Kjdped E Np Ejfx Aa Eonf segment head diameter: 460mm segment dimensions: 90x38x180mm Number of segments: 1 set = 8 pieces Grinding motor infeed: 0,01mm - 0,1 mm infinitely variable Hydraulic pendulum drive New supply cable between machine and control cabinet

Year of construction: 1981, condition: used, Make cover Type FP 4 Table: dimensions 1000 x 470 mm longitudinal movement X - axis 700 mm transversal movement Y - axis 400 mm Ksdpfx Ajihp U Dja Esnf vertical movement Z - axis 450 mm projection spindle 50 450 mm spindle mounting ISO 40 Number of spindle speeds 18 Spindle speed range 31,5 1600 rpm Number of revolutions horizontal spindle 18 pcs. Speed range horizontal spindle 31,5 1600 rpm Weight machine 2000 kg feeds X Y Z axis 18 pcs 10 500 mm/min Accessories milling head with quill Table 1000 x 470 mm

Condition: new, Year of construction: 2025, cutting speed 35 m/s grinding height 210 mm workpiece length / mm weight of the machine ca. 210-260 kg required space 1100 x 760 x 860 mm The G115 Surface Grinder is a compact grinding machine designed for processing the circumference or face of the grinding wheel on the horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, inclined or shaped surfaces can also be processed. The machine is ideal for small businesses, maintenance industries, home workshops, laboratories, teaching demonstrations, and more. TECHNICAL DATA Maximum cutting amount: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal stroke of the worktable: 340 mm Transverse travel of the worktable: 170 mm T-slot of the worktable: 1-12 mm Outer diameter × inner diameter × thickness of the grinding wheel: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical feed handwheel interval: 0.025 mm Lateral feed handwheel interval: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Knedpfx Aovuuvkoa Ejf Package size: 1100×760×860 mm FEATURES The worktable can be moved back and forth as well as left and right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. The grinding head runs smoothly. Compact design with low noise. The machine is lubricated by a manual oil pump. To lubricate, simply pull out the handle. Work cabin is available separately. If you need any other special accessories to improve work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: From the proximal end of the main spindle to 100 mm, the radial runout of the tapered hole axis is 0.01~0.02 mm.

Condition: as good as new (ex-display), Year of construction: 2024, Compact precision CNC rotary table, suitable for single part or small series production in precision engineering. A horizontal or vertical setup is possible. You can't buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, milling or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is via a controlled stepper motor of 1.8 degrees with 3.2A with a holding torque of 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest setting precision. The pair is mounted on four ball bearings and set to be free of play, and is also adjustable. The one-piece, stable output spindle is fitted with a face plate d=108 mm with an internal taper MK 1 and a through hole 10.3 , (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with power supply is included in the package. The optimized pre-programming takes place in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental rotary cycles, right and left travel and cycle pauses are of course programmable. With the software you can Travel programs and cycles; Absolute or incremental travel values The actual value of the rotary axis can be easily queried at any time using the software. You can receive start pulses from the NC machine using the output. Difficult scale divisions, cross holes or gears can be produced quickly. You can also now use a start pulse to travel through several different travel angles one after the other - e.g. incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees with or without a break or turn back again. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. Kodped Erdrofx Aa Ejnf NEW: As an additional option, all 16 travel steps as well as start and ref. commands can now be remotely controlled by your NC control using M functions. Optional: sealing air with splash guard hood We can offer standard clamping devices for your applications, and we also have the option of producing special clamping devices for you quickly and inexpensively. Special accessories: Three-jaw chuck 80 mm: 125 euros # 600011 Three-jaw chuck 100 mm, 25 mm bore and an adapter plate (center height increased to 80 mm): 300 euros # 600021 Tailstock: height adjustable 60 - 80 mm: 150 euros # 600030 Holder for ER 25 collet with nut: 125 euros # 600031 USB data cable for programming via PC: 150 euros # 600032 Programming your travel angle: 40 euros # 600033 Measuring travel program and test report of the final acceptance 100 euros # 600036 Collet set ER 25 to D16 mm 10 pcs.: 125 euros # 600037 Holder for ER 32 Collet with nut up to D20: 125 euros # 600097 Control cable with magnetic switch read contact for automation without NC machine output: 25 euros # 600099 Acceptance/ program / aluminum case / software provision: 80 euros

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Ksdpsw U Ry Nefx Aa Esnf Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm 500mm grinding wheel diameter New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. Knedpsuwv Idefx Aa Ejf -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)