Balancing machine

SCHENCK HM60U

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle Kwsdpjxmhdnjfx Ah Eeu - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Kwsdpsifi D Tsfx Ah Eou Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár

Condition: excellent (used), Year of construction: 2014, table diameter: 1,600 mm, workpiece diameter (max.): 2,000 mm, overall weight: 25,000 kg, CNC Vertical lathe YOUji - VTL1600ATC+C Control: FANUC 18i-TB Year: 2014 Driven tooling Bt-50 with 2400 Rpm 8000 Kg Table load 4 heavy duty jaws Kwedpfx Aeyimptjh Eeu Box Slideway structure Chip conveyor Oil Chiller Coolant system Tooling package optional Automatic lubrication Max. turning Ø: 2000mm Table Ø: 1600mm Horizontal movement support: 1015mm Stroke ram left: 800mm ATC / revolver: 16 Single column or double column:single Speeds / ranges: 250Rpm Power: 45kW Maximum turning height: 1200mm C-Axis: 360000° Power live tools: 11kW Chip conveyor: Yes Length: 4500mm Width: 5500mm Height: 5800mm Weight: 25000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2019, CMZ TD45Y (2019) CNC LATHE WITH LIVE TOOLING AND “Y” AXIS Z 2,250 CNC FANUC 32i B 15” Color LCD Manual-Guide - Swing over bed: 950 mm - Swing over carriage: 715 mm - Max. turning diameter: 550 mm - Max. turning length: 2,200 mm - Travels: X: 380 mm Y: +80 / -60 mm Z: 2,200 mm - Chuck diameter: 315/400 mm - Bar capacity: 127 mm - Spindle nose: ASA 11” A2 - Spindle speed: 2,200 rpm - 51 kW (S3 25%), 39 kW (S1) - Maximum torque: 3,600 Nm (max), 3,000 Nm (S2 25%), 2,000 Nm (S1) - Powered turret: 12 stations (16) (1 station indexing: 0.25 s) - Tool size: 25 x 25 mm (diameter 50 mm) - Live tooling: 13.7 / 11 kW, 12,000 rpm - C axis indexing: 0.001 mm INCLUDED EQUIPMENT: - 3-jaw hydraulic chuck CGH-21 diameter 530 mm - C axis 360° (0.001°) - Tool presetter - Integrated tailstock - Programmable tailstock - High-pressure pump 30 bar - Chip conveyor - Circuit, base, and logic for steady rest - Programmable hydraulic steady rest SMW AUTOBLOK SLU-X-4-ZS (30–245 mm) - Set of internal/external toolholders and live toolholders - Set of CMZ and FANUC manuals CONDITION: Kodpfsyklzmsx Ah Eowu Machine in excellent, semi-new condition. Can be inspected under power. Immediate delivery.

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm Ksdpfxjx Ein So Ah Eswu - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: good (used), Year of construction: 2008, Gear grinding machines Reishauer RZ303 Kwjdpfx Ajxz E S Eeh Esu

Condition: excellent (used), Year of construction: 2011, operating hours: 5,040 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 420 mm, turning diameter: 420 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, MAZAK QUICK TURN 300 Smart Operating Hours: Automatic Operation: 5,040 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: Ø 720 mm Max. turning diameter: Ø 420 mm Max. bar stock diameter: Ø 80 mm Max. machining length: 1,200 mm Main Spindle Max. spindle speed: 4,000 rpm Spindle nose: JIS A2-8 Rated power (40% duty cycle): 26 kW Max. torque: 750 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 50 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 240 mm / 1,314 mm Kwsdpswzkvfefx Ah Eju Tailstock Taper: MK NC axis, pressure controlled via M-codes Max. axial pressure: 10,000 N Dimensions & Weight Machine dimensions (L x W x H): 3,770 x 1,810 x 1,900 mm Weight: 7,100 kg (without chip conveyor and coolant) Chuck: Kitagawa BB210 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flush General Specifications: SD MEMORY I/F (1P) + USB MEMORY I/F (1P) Mazak standard colour NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill (650U/1250U) Operator door with safety interlock switch Double foot switch Fully enclosed work area Work area lighting Safety devices according to global standards Complete coolant system Chuck status notification Automatic tool setter (Tool Eye) 10.4" colour display EIA/ISO package LAN interface

Condition: used, Year of construction: 2007, Technical details: balancing body max.: 100 kg balancing body diameter: max. Ø 800 mm swing diameter: 630 mm Balancing revolution per minute: 120 - 1200 U/min drive power: 4 kW Weight approx.: 0,6 t dimension machine xH: 1,8 x 1,2 x 1,4 m dimensions electric cabinet: 650 x 700 x 1900 mm Vertical balancing machine The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Unbalance static=2 and dynamic=3 Measuring device CAB 803 Display Screen Computer RS232C Basic system dynamic unbalance in 2 levels Operation via control panel on the switch cabinet / 2x foot switch No printer available! Kjdpfovc Apzjx Ah Eowu *

Condition: used, Year of construction: 2005, weight of the machine ca. 7.800 kg Kedpjudc S Hjfx Ah Eewu dimensions of the machine ca. 3.380 x 3950 x 3015 m

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 640 mm, spindle motor power: 15,000 W, total height: 2,120 mm, overall weight: 7,100 kg, product length (max.): 2,542 mm, number of axes: 3, This 3-axis CMZ TA-20TY-640 horizontal turning machine was manufactured in 2023. It features a maximum cutting diameter of 460 mm, length of 640 mm, and a robust 15 kW spindle capable of 4000 rpm. Includes a Y-axis travel of +70/-50 mm, 15 driven tools with a speed up to 12,000 rpm, and a bar capacity of 66 mm. Consider the opportunity to buy this CMZ TA-20TY-640 horizontal turning machine. Contact us for more information about this machine. • Maximum cutting diameter – 460 mm • Maximum cutting length – 640 mm • Swing over bed – 760 mm • Swing over saddle – 600 mm • Y-axis travel – +70 / –50 mm • Bar capacity – 66 mm • Chuck size – A2-6" • C-axis – 0.001° • Tools number – 15 • Driven tools – 15 • Driven tool power – 8.1 kW • Driven tool speed – 12 000 rpm Kedox H U Dwopfx Ah Eowu • Tailstock taper – CM3 • Spindle run time – Less than 1500 h (to be confirmed) Additional equipment • Chip conveyor – Yes, side discharge • Tool presetter – Yes • Automatic tailstock carriage – Yes • Automatic doors – Yes • High-pressure pump – 6 bar • Robot preparation – Yes • Set of tool holders – Yes • Spindle cooling system (cooling unit instead of air/oil exchanger) – Yes • Filtration – 90 µm