Cylindrical grinding machine

Schaudt A440X1500

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 130 kg, grinding length: 1,500 mm, grinding wheel diameter: 500 mm, total width: 2,155 mm, total length: 5,465 mm, total height: 1,700 mm, grinding diameter: 300 mm, grinding wheel width: 63 mm, The cylindrical grinding machine was fully overhauled in 2021 and has hardly been used since. The condition of the machine is practically like new. Equipment as shown in the photos. The machine is connected to power and can be inspected at any time by prior arrangement. Bwjdex A Dfyopfx Afneh Technical specifications: Grinding diameter: 300 mm Grinding length: 1500 mm

Condition: new, Year of construction: 2025, machine/vehicle number: 0000, We offer complete revised FAT Lathes, in factories geometry, bed ground by FAT, new electrics, TUR 630 M x 2000 or TUR 630 M x 3000 TUR 630A x 3000 or TUR 630 A x 4000 spindlebore 140mm , 2 chucks 400 mm Bison Machine deliverytimes 3 - 4 Months after written order Bwjdpfonqzaiex Afneh Accescories as per Customer specifications

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 7,000 rpm, spindle motor power: 34 W, Equipment: documentation/manual, rotational speed infinitely variable, Travelling column milling machine used with CNC H. TNC-530 Bwedpoxyw Tfjfx Afnjh

Condition: good (used), functionality: fully functional, turning diameter: 655 mm, turning diameter over bed slide: 655 mm, turning length: 5,000 mm, Swing diameter over bed 655 mm Bjdpfx Aow N D T Sefnswh Swing diameter over support 390 mm Turning length 5000 mm Spindle bore 82 mm Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG Bodpfet Nhqyex Afnewh FEM ISO 1Am M4 KW 2.4/15.5 ( 50 Hz) MAXIMUM CAPACITY 16 TON

Condition: used, Year of construction: 1982, grinding length:500 mm grinding width:225 mm workpiece height:400 mm total power requirement:5,5 kW Bwjdpfx Afecxxtmenoh weight of the machine ca.:3,4 t NC81 NC-control, table belt drive 100-25000 mm/min., automatic feed, electronic dressing unit 020 NC-K with RPM-compensation, coolant pump, emergency cut-off

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table length: 3,500 mm, total height: 4,164 mm, total width: 5,875 mm, total length: 9,120 mm, rotational speed (max.): 6,000 rpm, workpiece weight (max.): 8,000 kg, overall weight: 29,000 kg, torque: 760 Nm, ACCESSORIES Bodpfsulwy Aex Afnowh Cooling / Coolan System Sí / Yes Internal Cooling / Coolan Through Spindle Yes / Yes Handwheel / Handwheel Yes / Yes Heidenhain Tool Probe / Tool Probe Heidenhain Yes / Yes Preparation for Renishaw Touch Probe / Preparation Renishaw Touch Probe Yes / Yes Integral Splash Guard / Integral Splash Guard Yes / Yes Chip Conveyor (2 Augers + 1 Lateral hinge) / Chip Conveyor (2 Chip Augers + Lateral 1) Yes / Yes Automatic Tool Changer / ATC Yes / Yes (24 tools / tools)

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Bwsdpfsqzkdmox Afnjh

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Bwodpfow T Sd Tox Afnsh Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp Bwjdpfx Aswudhuofnjh All information subject to change. A live demonstration under power is possible at any time in our showroom.