CNC bench drilling machine

SCHARMANN SOLON 4

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Hsdpshzbipsfx Afnsnh Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Technical details: spindle diameter: 150 mm x-travel: 10000 mm y-travel: 2500 mm bore spindle stroke: 700 mm ram stroke: 700 Hjdpfewg R Swsx Afnsnh dimension of the ram: 340 x 340 mm spindle taper ISO: 50 Speed of boring spindles: 1,25 - 1250 U/min. feed speeds infinitely variable: 1 - 5000 mm/min rapid traverse: 5 m/min total power requirement: 120 kW weight of the machine ca.: 115 t dimensions of the machine ca.: 15,1 x 10 x 6,4 m with CNC SIEMENS 840 Dsl complete retrofit in 2010 FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity, longitudinal movement 2500 mm, angular milling head 4 x 90° universal milling head floor plate area ca. 12000 x 6000 mm ( 72 m²) chip conveyor and coolant attachment aerostatic guideways *

Condition: excellent (used), Year of construction: 2006, turning diameter 330 mm turning length 750 mm control WEILER D3 dia. of quill 50 mm quill stroke 130 mm taper in tailstock-quill MK-3 spindle turning speed range 1-4500 U/min taper in main spindle MK-5 weight of the machine ca. 1400 kg dimensions of the machine ca. 1900 x 1300 x 1800 mm This WEILER E30x750 is in very good condition and can be viewed by arrangement with the seller. - Lever quick-release chuck for pressure collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4500 rpm. Hnjdpfxsx Szpws Afnsh - 1 set of pressure collets DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle - Live steady with sliding jaws, passage 10-85 mm - Three-jaw chuck with wedge bar system, diameter 160 mm, bore 42 mm, with mounting according to DIN 55027 /5, with 1 set of basic jaws and hard reversible attachment jaws - Lever quick-action chuck for pressure collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4500 rpm. - 1 set of pressure collets DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle Translated with (free version)

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Hnsdpfxowycmmj Afnoh Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Hnjdpsq U R T Nofx Afnoh Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: used, turning diameter 260 mm turning length 280 mm control OSP500 1. Machine Specifications Item Unit Specification Number of controlled axes – 2 Swing diameter over bed mm Ø 450 Swing diameter over slide mm Ø 350 Swing diameter over cross slide mm Ø 300 Maximum turning diameter × length mm Ø 260 × 280 Spindle diameter mm Ø 100 Spindle nose – JIS A2-6 Spindle taper mm Ø 70 × 1/10 Hnodpfx Afswm Rrdensh Spindle bore mm Ø 62 Spindle speed range rpm 35 – 4,000 Z-axis travel mm 320 Z-axis rapid traverse mm/min 20,000 X-axis travel mm 155 X-axis rapid traverse mm/min 15,000 Turret type – V Number of tools – 8 (optional 12) Tool size (external turning) mm ¦ 25 Tool size (internal turning) mm Ø 40 (optional Ø 32)

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Hodpfxst Hwq Rs Afnonh Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, Hnodpex I N Rbjfx Afneh milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: excellent (used), Henri Hauser M5 DR jig boring machine spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Drilling capacity in steel 40 mm spindle mounting MK 4 drilling spindle stroke 170 mm number of spindle revolutions 2 infinitely variable 10-2000 rpm Boring diameter max. 230 mm Table dimension - longitudinal 900 mm Table dimension - crosswise 770 mm Vertical travel of cross beam 630 mm Drilling spindle 6 pieces from/to 0.02-0..20 rpm Clearance between uprights 900 mm Passage between spindle and table 815 Spindle motor 4.0 HP Total power requirement 380 V Machine weight approx. 3.9 t Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request! Hedpsg Ibuxefx Afnjnh

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 121,665 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, overall weight: 9,500 kg, controller model: Heidenhain iTNC530, coolant supply: 40 bar, rapid traverse Z-axis: 60,000 m/min, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rotary table diameter: 280 mm, rotational speed (max.): 18,000 rpm, operating hours of spindle: 59,846 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Heidenhain iTNC 530 Spindle HSK63 18,000 rpm (new spindle 08/2024) 32 tool positions plus additional magazine ZM157 Rotary table SRT 280 mm worm drive 6-way rotary union on the table for zero-point clamping system External coolant supply Chip flushing pistol Oil mist extraction Internal coolant supply 40 bar Automatic cabin door Blow-off device Chip conveyor Handwheel Thermal compensation Renishaw probe Kinematic option Preparation for BLUM tool measurement fork version Hedpfxeyc Nkps Afnsnh Preparation for PCS order management Interface for robot RS2 (we currently have a suitable RS2 robot with control system and pallets available in a current auction) Machine ON: 121,665 h Spindle ON: 59,846 h (new spindle 08/2024) Very well-maintained condition